wayground logo

Free Printable Worksheets

Font size

S
M
L
XL
Worksheets

Unity Solutions Specialist v.1

Total questions: 69

Worksheet time: 35mins

Name
Class
Date
1.

A storage administrator has requested a recommendation on upgrading their VNX5600 to a comparable Unity storage array. The solution requires a maximum capacity of 3.5 PB.

To meet the administrator's requirement without over provisioning the capacity, which Unity Hybrid storage array is recommended?

a)

Unity 300

b)

Unity 400

c)

Unity 500

d)

Unity 600

2.

What is the minimum VMware Hypervisor version a server must be running in order to support the deployment of a UnityVSA system?

a)

4.0

b)

5.0

c)

5.5

d)

6.0

3.

Which feature is supported on a UnityVSA operating environment?

a)

Asynchronous Replication

b)

MCC Write Caching

c)

Quick Start Pool Provisioning

d)

Data at Rest Encryption

4.

A storage administrator is creating a host profile in Unisphere to provide host access to block storage resources using the iSCSI protocol. The host initiators were not automatically discovered and must be manually added.

In addition to the SAN host IQN, what other configuration can be performed through the "Create iSCSI Initiator Wizard" window?

a)

Enable and disable CHAP settings

b)

Create Mutual CHAPsecret

c)

Create Global CHAP secret

d)

Enter CHAP username and secret

5.

A storage administrator is configuring a storage pool on a Unity system containing Flash disks and SAS disks. What tier will the system assign to each of the disk types?

a)

Flash: Extreme PerformanceSAS: Performance

b)

Flash: PerformanceSAS: Capacity

c)

Flash: Extreme PerformanceSAS: Capacity

d)

Flash: CapacitySAS: Performance

6.

What describes the LUN Snapshot Copy operation?

a)

Parent cannot be a snapshot copyCan only copy a detached snapshotHas an independent Retention Policy from the parent

b)

Parent can be a snapshot copyCan only copy a detached snapshotHas an independent Retention Policy from the parent

c)

Parent can be a snapshot copyCan copy an attached or detached snapshotInherits the parent Snapshot Retention Policy

d)

Parent cannot be a snapshot copyCan copy an attached or detached snapshotInherits the parent SnapshotRetention Policy

7.

Which technology is used by Unity Snapshots?

a)

Copy on First Write

b)

Inline Deduplication

c)

Redirect on Write

d)

Block Compression

8.

What is the correct sequence of steps taken by the storage array when an AC power failure is detected?

a)

Array is powered down = SP reset and goes into Low Power mode

b)

BIOS loads the PMP firmware = Power is switched to the BBY and SPs are reset

c)

SP reser and goes into Low Power mode = BIOS lads PMP firmware

d)

Power is switched to the BBU and Sos are reset = SP Cache dirty pages are written to flash

e)

SP Cache dirty pages are written to flash = Array is powered down

9.

A system administrator is configuring asynchronous remote replication for an existing NAS server and its' file systems on a Unity system. What should the administrator create to ensure all data is replicated for the NAS server and the file system?

a)

Replication sessions on each file system only

b)

Replication sessions for each file system first and then the NAS server

c)

A replication session on the NAS server and then manually create replication sessions on each file system

d)

replication session for only the NAS server

10.

Which Unity feature provides a high bandwidth connection for large file transfers, enables proactive Service Request generation and usage license reporting, and operates on a 24x7 basis?

a)

EMC Service Center

b)

Software Licensing Central

c)

Unisphere Central

d)

EMC Secure Remote Services

11.

Which software bundles are provided with the Unity Starter software package?

a)

FAST Cache and Fast VP

b)

Thin Provisioning and Quality of Service

c)

Controller-Based Encryption and RecoverPoint Basic

d)

FAST Cache and Local Point-in-Time Copies

12.

When configuring asynchronous remote replication, how many internal Unity Snapshots are configured and utilized on the source system by a single replication session?

a)

1

b)

2

c)

3

d)

4

13.

A storage administrator is implementing FAST Cache on a Unity 500 storage array and can select from a mix of SSD drives. Which drive types can be configured to meet the administrator’s requirements?

a)

200 GB and 400 GB

b)

400GB and 1.6 TB

c)

1.6 TB and 3.2 TB

d)

3.2 TB and 800 GB

14.

A storage administrator is required to test a new version of an application loaded on a secondary host. The administrator must use existing data contained on a LUN provisioned from Unity to a primary host.

a)

Create asnapshot of the LUNConfigure LUN access for the secondary hostAttach the snapshot to the secondary host

b)

Create a snapshot of the LUNConfigure snapshot access to the LUN for the secondary hostAttach the snapshot to the secondary host

c)

Create a Synchronous Replication session for the LUNConfigure access to the replica LUN for the secondary hostAttach the secondary host

d)

Create an Asynchronous Replication on session for the LUNConfigure access to the replica LUNfor the secondary hostAttach the secondary host

15.

On which systems is Quality of Service available?

a)

Physical Unity systems only

b)

UnityVSA systemsonly

c)

Physical Unity and UnityVSA systems

d)

All Flash Unity systems only

16.

When deploying virtual disks for a UnityVSA system, what is an EMC recommended Disk Provision Policy?

a)

Thick Provision Eager Zeroed

b)

Thin Provision

c)

Thick Provision

d)

Thick Provision Lazy Zeroed

17.

Which UnityVSA user interface allows advanced users to create scripts for automating routine tasks?

a)

Unisphere Central

b)

UEMCLI

c)

SP Console

d)

Unisphere GUI

18.

A system administrator has configured a system using the Initial Configuration wizard. After completing the wizard, the administrator discovers that an incorrect IP address has been assigned to the Unity system.

How can the IP address be changed?

a)

The IP address cannot be changed once it has been configured

b)

Through the Service interface using the ifconfig command

c)

In the Unisphere Settings menu

d)

The IP address can only be changed using the UEMCLI

19.

Which FAST Cache operation can be performed from the Settings window?

a)

Disable FAST Cache use on a specific pool

b)

Pause FAST Cache use

c)

Expand FAST Cache

d)

Enable FAST Cache use on a specific pool

20.

Which Unity service task is used to reinstall the root operating system while leaving the user’s data intact?

a)

Restore the Management server

b)

Reimage the Storage Processor

c)

Restore the Management software

d)

Reinitialize the storage system

21.

What is the maximum number of LUNs in a Consistency Group?

a)

25

b)

50

c)

75

d)

100

22.

Which migration tool can be used to move file data a Unity storage array in both NFS and CIFS/SMB protocols?

a)

EMC Select Datadobi

b)

Unity Async Replication

c)

rsync

d)

EMCopy

23.

Which step must be completed prior to performing the initial configuration of a UnityVSA system and creating the first storage pool?

a)

Create an ESXi host profile

b)

License the system for NFS and SMB support

c)

Add vDisks to the storage appliance

d)

Install license keys for thin provisioning

24.

What is the minimum and maximum recovery point objectives (RPO) configurable when using Unity native asynchronous replication?

a)

Minimum= 5 minutesMaximum= 24 hours

b)

Minimum= 5 minutesMaximum= 48 hours

c)

Minimum= 1 minuteMaximum= 24 hours

d)

Minimum= 1 minuteMaximum= 48 hours

25.

A system administrator has added a new Unity storage array to their environment. The administrator wants to migrate block data from vVNX running in their VMware environment to a UnityVSA. In addition, the administrator needs to migrate the block data from an older CLARiiON storage array to the new Unity storage array.

a)

SAN Copy Push

b)

VPLEX

c)

Host-Based LVM

d)

RecoverPoint

26.

How is encryption set for a Unity storage system?

a)

Clicking the “Mode” checkbox on the Manage Encryption page

b)

Selecting “Status” on the Manage Encryption page

c)

Automatically set at the factory

d)

First timethe license is applied

27.

A system administrator experienced a power failure in their environment. To which device will cache de-stage?

a)

M.2 SSD on each Storage Processor

b)

First four disks in the Disk Processor Enclosure

c)

Cache does not need to de-stage as it is now non-volatile

d)

Backup Battery Unit will keepthe data alive in cache

28.

A service provider is installing a Unity storage system for an end-user. The end-user is concerned about network security and will not allow the service provider access to the network.

How can the service provider set a static IP address for the Unity storage system management interface?

a)

Use the embedded InitCLI tool

b)

Connect directly to the service ports and configure the networking through UEMCLI

c)

Use an IPMI serial over LAN connection

d)

Use the Connection Utility to create a configuration file

29.

Which task must be performed on the storage system in order to access a file system read/write snapshot?

a)

Configure Host Access to the LUN snapshots

b)

Configure the NFS/SMB share to the file system snapshot

c)

Connect to the NFS/SMB share of the snapshot

d)

Perform the snapshot “Attach to Host” operation

30.

Which severity level alerts for a fault condition that has occurred, has minor impact on the system, and does not need to be fixed immediately?

a)

Critical

b)

Notice

c)

Error

d)

Warning

31.

A storage administrator wants to configure a Unity system to log system events to a remote log server. In order to allow access to the log server, which port should the administrator ensure is not blocked by the firewall?

a)

514

b)

714

c)

1000

d)

5179

32.

A Unity system LUN has a daily snapshot schedule with a Retention Policy of seven days. A hardware failure results in a double fault of the LUN.

a)

All of the snapshots will be unavailable to restore data from

b)

Data restoration is available from the oldest snapshot, all others are unavailable

c)

All of the snapshots will be available to restore data from

d)

Data restoration isavailable from the newest snapshot, all others are unavailable

33.

What describes multiple LUN snapshots?

a)

Captures multiple point-in-time data states.Snapshot data state is marked “unmodified” from its source when attached.Snapshot tree supports multiple simultaneous attaches.

b)

Captures multiple point-in-time data states.Snapshot data state is marked “unmodified” from its source when attached.Snapshot tree supports only one attach at a time.

c)

Captures multiple point-in-time data states.Snapshot data state is marked “modified” from its source when attached.Snapshot treesupports multiple simultaneous attaches.

d)

Captures multiple point-in-time data states.Snapshot data state is marked “modified” from its source when attached.Snapshot tree supports only one attach at a time.

34.

What is the maximum number of LUN snapshots that are supported by Unity?

a)

16

b)

96

c)

256

d)

512

35.

At which stage in the Unity power up sequence would the Storage Processor enter Service mode upon detecting an error?

a)

After the CMI is started

b)

Bootflash

c)

POST

d)

BIOS

36.

An administrator’s Unity system is configured with both a Fibre Channel CNA and a Fibre Channel I/O module. Which Fibre Channel port on each SP must be used for native synchronous replication?

a)

CNA FC port 5

b)

I/O module FC port 2

c)

CNA FC port 4

d)

I/O module FC port 5

37.

Which feature provides the ability to provision block and file storage for Microsoft Windows or Microsoft SharePoint sites?

a)

EMS Storage Integrator for Windows

b)

Array Offloaded Data Transfer

c)

vStorage APIs for Array Integration

d)

EMC Virtual Storage Integrator

38.

Which information must be retrieved and used to select the unconfigured UnityVSA system when running the Auto-discover option of the Connection Utility?

a)

Array Name

b)

System’s SerialID

c)

DNS Host Name

d)

System’s UUID

39.

What is an advantage for selecting Centralized ESRS over Integrated ESRS?

a)

External virtualmachine is not required

b)

WAN compression is not required to Unity systems

c)

CHAP security is not required between Unity systems

d)

Internet connectivity is not required for every Unity system

40.

In UnityVSA, what is the maximum storage capacity offered by the VVOLs license?

a)

4TB

b)

10TB

c)

25TB

d)

50TB

41.

A system administrator receives a warning that their DPE I/O Module has a fault. In this situation, which type of replacement is required?

a)

Hot-pluggable CRU

b)

Non-Hot-pluggable FRU

c)

Hot-pluggable FRU

d)

Non-Hot-pluggable CRU

42.

Which UnityVSA storage resource can be configured with Host I/O limits?

a)

NAS Server

b)

Pool

c)

File System

d)

LUN

43.

Which option can be enabled in the Advanced tab of the SMB Share Properties window?

a)

SharedVHDX

b)

Controller-Based Encryption

c)

SMB Direct

d)

Protocol Encryption

44.

Which UnityVSA configuration can be performed using the Unisphere Initial Configuration wizard?

a)

Register host iSCSI initiators

b)

Configure Link Aggregation

c)

Register host HBA WWNs

d)

Add iSCSI network interfaces

45.

A system administrator wants to configure asynchronous replication on their Unity system. What is required before creating a replication session?

a)

A Fibre Channel connection configured between the remote systems.A configured replication connectionbetween the remote systems.

b)

A Sync Replication Management Port configured on each system.A Fibre Channel connection configured between the remote systems.A configured replication connection between the remote systems.

c)

An IP-basedreplication interface on the same network as the destination system’s replication interface.A configured replication connection between the remote systems.

d)

A Sync Replication Management Port configured on each system.An IP-based replicationinterface on the same network as the destination system’s interface.A configured replication connection between the remote systems.

46.

How long before a license expires will UnityVSA send the first alert warning?

a)

3 days

b)

7 days

c)

15 days

d)

1 month

47.

What is the minimum memory requirement for a host running VMware ESXi 6.0 to support the deployment of a UnityVSA system?

a)

8 GB

b)

12 GB

c)

16 GB

d)

18 GB

48.

A storage administrator wants to create a series of daily snapshots for an existing critical LUN. How can the snapshots be created?

a)

Snapshot schedules can only be configured within the LUN Creation wizard

b)

From the Pool Properties page, configure the Snapshot schedule

c)

Only manually taken snapshots are supported on existing LUNs

d)

From the LUN Properties page, configure the Snapshot schedule

49.

Which operation can be performed from the FAST VP settings section in the Unisphere Settings window?

a)

Enable scheduled data relocation at the pool level

b)

Exclude pool from the data relocation schedule

c)

Enable scheduled data relocation at the system level

d)

View the data relocation progress between tiers

50.

Through which protocols are backend storage provisioned to the ESXi host when deploying a UnityVSA system?

a)

iSCSI, SMB, and NFS

b)

iSCSI and NFS only

c)

FC, iSCSI, and NFS

d)

FC and iSCSI only

51.

Where do the D@RE encryption/decryption functions occur in the Unity storage system?

a)

Host I/O Modules

b)

Storage Processor Cache

c)

SAS I/O Module

d)

Self-encrypting drives

52.

A system administrator is browsing their local management station for a Unity license file. Which file extension is used for Unity license files?

a)

.lic

b)

.rsa

c)

.lin

d)

.cer

53.

Based on the exhibit, which port can provide either Fibre Channel or Ethernet connectivity for host access?

a)

A

b)

B

c)

C

d)

D

54.

A storage administrator wants to add as asynchronous replication session to a pair of Unity systems with an existing synchronous replication session that is operating correctly. Which configuration steps are needed?

a)

Create Replication interfaces on both systems.Modify the Replication Connection Mode.Run a ReplicationConnection Verify and Update operation.

b)

Create Replication Interfaces on the source system.Modify the Mode for Replication Connection.Perform a manual Sync operation on the Asynchronous session.

c)

Create Replication Interfaces on destinationsystem.Establish FC connectivity using the Synchronous FC Ports of each system.Perform a manual Sync operation on the Asynchronous session.

d)

Create Replication Interfaces on both systems.Establish FC connectivity using the SynchronousFC Ports of each system.Run a Verify and Update operation for the Replication Connection

55.

Which Unity feature benefits oracle OLTP environments by improving storage utilization?

a)

4 block formatting

b)

Increased SP Cache size

c)

Automatic storage tiering

d)

VVOLS

56.

A system administrator has installed the Unity Connection Utility on a Microsoft Windows host. The Windows host is connected to the same physical subnet as a newly installed Unity storage system. When the utility is run, it does not discover any Unity storage systems.

What should be checked on the host that may be preventing the utility from discovering any Unity storage systems?

a)

Java SE version

b)

Ethernet adapter flow control

c)

Network Access Filter Driver

d)

Host firewall services

57.

A Unity 400 system has Data at Rest Encryption licensed and enabled. Which operation(s) must be performed from the Unisphere Settings window to ensure the system is still operational after SP replacements?

a)

Download Audit Log

b)

Download Checksum

c)

Backup Keystore File

d)

Download Audit Log and Checksum

58.

When a storage resource has a snapshot taken of it, where are writes to the storage resource written?

a)

New space allocated from the storage resource parent pool

b)

New space allocated in 256 MB stripes from FAST Cache

c)

Existing space of the storage resource

d)

Existing space from the Reserves LUN Pool

59.

When the LUN Snapshot Attach to Host operation is performed, what does the Unity system optionally do before beginning the attach process?

a)

Creates a snapshot of the LUN

b)

Detaches the host from the snapshots of any other LUN

c)

Createsa copy of the snapshot

d)

Deletes all other existing snapshots of the LUN

60.

Which Directory Services can be configured in the Unisphere Settings window?

a)

LDAP

b)

NIS

c)

NIS

d)

Active Directory

61.

A Unity storage system is installed with 10 Gb optical SFPs in CNA ports 4 and 5 of both Storage Processors. The storage administrator has had a request from a user to connect to the storage system through Fibre Channel.

a)

Configure all CNA ports for 16Gb Fibre Channel

b)

Configure CNA port 4 of SPA and SPB as 10Gb opticalConfigure CNA port 5 of SPA and SPB as 16 Gb Fibre Channel

c)

Configure CNA port 4 and 5 of SPA as 10 Gb opticalConfigure CNA ports 4 and 5 of SPB as 16 Gb Fibre Channel

d)

CNA ports cannot be reconfigured once they are committed

62.

In UnityVSA, which license(s) is able to extend the storage capacity from 25 TB to 50 TB with an upgrade path license?

a)

Professional only

b)

Professional and VVOLS

c)

VVOLS only

d)

Community

63.

When defining which resources on the destination system the replicated item will use for an asynchronous session, which settings must be provided?

a)

Replication Mode, RPO, and ReplicateTo

b)

Name, Pool, and Storage Processor

c)

Ethernet Port, Subnet/Prefix Length, and Gateway

d)

Management IP Address, User Name, and Password

64.

What is one method that is used to verify an ESRS configuration?

a)

Proxy server authentication

b)

RSA authentication

c)

Trigger an SNMP trap test

d)

Send an e-mail verification

65.

A file system is 1 TB in size and contains 250 GB of data. The file system is not fully allocated and only 450 GB of pool storage is in use. The user wants to reduce the file system to 300 GB.

How much space is returned to the storage pool?

a)

150 GB

b)

450 GB

c)

700 GB

d)

750 GB

66.

In order to replace a faulty component, a service provider has placed one of the Unity Storage Processors into Service mode. Once the component is replaced, how is the Storage Processor brought back into Normal mode?

a)

Exit the Service Mode task

b)

Reboot the Storage Processor

c)

Reboot the storage system

d)

Restart the Management software

67.

A user is having difficulty troubleshooting a Unity storage system and the service provider has been contacted for assistance. The service provider needs to run some service commands on the Storage Processors to troubleshoot the issue further.

Which step must be taken to allow the service provider remote access to the storage system?

a)

Enable SSH on the storage system

b)

Set the Unisphere preferences to “Optimize” for remote access

c)

Specify the SMTP configuration

d)

Specify the Remote Logging configuration

68.

How long will a Copy Back operation take when a hot spare is invoked?

a)

Pro-Active hot spare does not use a Copy Back operation

b)

Copy Back time depends on the RAID type

c)

Copy Back time depends on the disk capacity

d)

Copy Back time depends on the disk type

69.

A storage administrator wants to configure a Unity system to join the list of arrays remotely monitored for activity and system status using Unisphere Central. The security policy on the Unisphere server was set to “automatic”.


What additional security information must be specified in the Unisphere Settings window to enable communication with Unisphere Central?

a)

Unisphere Central IP address and login credentials

b)

Unisphere Central IP address and Central Hash

c)

Unisphere Central Hash and login credentials

d)

Unisphere Central Hash and challenge phrase