What type of modification is not permissible in the front of a vehicle ?

Any modification has been made to the front end suspension which reduces turning radius.

Any modification has been made to the suspension to cause the vehicle body or chassis to come in contact with the ground

If a CV boot is missing the vehicle will.....

If modifications cause wheels to come into contact with the body

If a rack and pinion bellows is missing the vehicle will still pass inspection.

Power steering hoses are damp but fluid reservoir is full

Power steering hoses are damp but fluid reservoir is empty

If a vehicle has an obvious power steering leak the vehicle will...

All thread is permissible for use as a U-bolt when manufacture parts are not available

Steering wheels must be at least this diameter to pass VSI

A spring is broken, sagging or misaligned, shackles are worn or loose, or if air bags are collapsed or the air suspension system leaks or is deflated.

A MacPherson strut installed on a motor vehicle is broken, bent, loose or does not function properly.

If a vehicles with a less than 17 inch wheel measured movement at top or bottom of tire is greater than.............inch it fails

If a vehicles with a 18 inch wheel measured movement at top or bottom of tire is greater than.............inch it fails

If a vehicles with an over 18 inch wheel measured movement at top or bottom of tire is greater than.............inch it fails

If a strut is leaking but operates normally it will....

Steering stops are not necessary to pass inspection

For manual steering vehicles engine MUST be running to check specifications

No steering wheel play is permissible for what type of vehicles?

Reject vehicle if steering wheel moves more than 2 inches with power steering

When inspecting ball joints without wear indicators you should yield to the manufacturers specifications to determine pass or fail

When inspecting a wear indicator joint you find the checking surface is flush or inside the cover you should

On Chrysler vehicles with wear indicator joints some movement of the grease fitting is acceptable

On a power steering truck steering wheel with an 18 inch wheel permitted lash is less than

On a power steering truck steering wheel with an 19 inch wheel permitted lash is less than

On a power steering truck steering wheel with an 20 inch wheel permitted lash is less than

On a power steering truck steering wheel with an 21 inch wheel permitted lash is less than

On a power steering truck steering wheel with an 22 inch wheel permitted lash is less than

If modifications to vehicle suspension do not affect shock absorber travel than the vehicle will....

Lift blocks can be used on the front of the vehicle

If vehicle wheels are visually out of line or bent the vehicle will....

Defective or missing CV boots will cause the vehicle fail

Power steering fluid that is visibly leaking or reservoir is low will cause vehicle to fail

If power steering rack or components are damp the vehicle will....?

A vehicle will not fail for a loose or frayed power steering belt

All thread rod is approved material to use as a U bolt

If vehicle measured movement at top or bottom of tire is greater than how much on a wheel less than 17 inches .....

If vehicle measured movement at top or bottom of tire is greater than how much on a wheel l 17 to 18 inches .....

If vehicle measured movement at top or bottom of tire is greater than how much on a wheel over 18 inches .....

If vehicle is equipped with king pins the inspector must eliminate all wheel bearing movement by applying......

vehicles with excessively worn bearings or missing components will.....?

If steering linkage play measured at front or rear of tire is greater than(..........) on a steering wheel 16 inches or less vehicle will fail

If steering linkage play measured at front or rear of tire is greater than(..........) on a steering wheel 17 to 18 inches vehicle will fail

If steering linkage play measured at front or rear of tire is greater than(..........) on a steering wheel over 18 inches vehicle will fail

Loose or missing bolts in the steering box will not cause the vehicle to fail

If a vehicle has a spring on top of the control arm you should lift the vehicle by the (.............) to check steering wheel play

If a vehicle has a spring in the middle of the control arm you should lift the vehicle by the (.............) to check steering wheel play

When checking for ball joint play what type of tool should the inspector use ?

Frames that bare bent,damaged or welded are acceptable and will pass

Trailers are requires to be equipped with an emergency chain or cable to pass

In order to measure steering lash on a vehicle over 10k it must be on a lift

Steering lash measured on a manual steering system over 10k must be (................) On a 16 inch or less steering wheel?

Steering lash measured on a manual steering system over 10k must be (................) On a 18 inch steering wheel?

Steering lash measured on a manual steering system over 10k must be (................) On a 19 inch steering wheel?

Steering lash measured on a manual steering system over 10k must be (................) On a 20 inch steering wheel?

ANY broken or misaligned leaf springs will cause the vehicle to fail

If a motorcycle is equipped with an air bag than the system must function properly and have an operating indicator lamp

If motorcycle handle bars are bent broken or loose than the motorcycle will fail inspection