NEW
Font size
WorksheetsEngine Review
Total questions: 14
Worksheet time: 16mins
What is this part called
Moon Cap
Thrust Bearing
Half Bearing
Shim Bearing
Name the item in the picture:
Gas Cap
Radiator Pressure Cap
Water Pump
Thermostat
An engine does not reach operating temperature while being driven. Which of these could be the cause?
A slipping water pump belt
A stuck open thermostat
A stuck closed thermostat
A clogged radiator passage
Green fluid is noticed on the ground beneath a vehicle’s engine. This condition could be caused by a leak at the?
Oil Filter Housing
Water Pump
Transmission Cooler Line
Valve Cover Gasket
Which engine valve configuration has the camshaft in the cylinder block.
Over Head Valve (OHV)
Over Head Cam (OHC)
Dual Over Head Cam (DOHC)
This is a trick question Mr. Gregoire
What direction is the piston traveling during the Power-Stroke?
Up
Down
Left
Right
What transfers motion from the camshaft to the push rod in an OHV engine?
Rocker Arm
Rocker Pivot
Lifter
Valve Spring
What are the two types of cooling systems:
Air and Vent
Vent and Electric
Liquid and Electric
Liquid and Air
True or False: An engines cooling system is designed to transfer excess heat from the engine to the atmosphere.
True
False
What position are the valves in during the intake stroke
Intake Closed, Exhaust Closed
Intake Open, Exhaust Open
Intake Open, Exhaust Closed
I have no idea
Cylinder volume with the piston at bottom dead center (BDC) compared to cylinder volume with the piston at top dead center (TDC)
Compression Ratio
Piston Comparison
Piston Aspect Ratio
Engine Displacement
What is the freeze point for coolant mixed with a 50/50 Antifreeze to water ratio ?
32*F
0*F
-35*F
-100*F
Technician A says that most aluminum heads should be removed while the engine is still warm. Technician B says that some manufacturers require head bolts to be removed in reverse order of the tightening sequence. Who is correct?
Tech A Only
Tech B Only
Both A and B
Neither A nor B
Technician A says that the engine should be cleaned before checking for oil leaks. Technician B says that a florescent dye should be added to the engine oil when checking leaks with a black light. Who is correct?
Tech A
Tech B
Both A and B
Neither A nor B
