NEW
Font size
WorksheetsAuto body Final Study 2
Total questions: 20
Worksheet time: 10mins
What do you mix body filler with?
A pigment cream (hardner)
Water
Paint
Solvent
Fiberglass filler is identified and used to_____________________.
cover an area of a patch panel or area of welding.
cover an area of a patch panel or area of welding.
fill in an area that needs more filler.
reinforced with strands of fiber for added strength.
All of the above.
Glazing putty and spot putty is used primarily where in repairs?
a. To fill small sand scratches and imperfections
b. Fill small dents
c. Used to apply over the top of body filler
d. Major dents
Both a & b
Lead fillers are used primarily used on _____________________.
a. thick old metal
b. Old restoration projects
c. Newer car
d. On thin sheet metal
Both a & b
Light weight body filler is also referred to as plastic filler?
True
False
Tech A states that a full face shield and safety glasses should be worn when grinding.
Tech B states that the edges of a body hammer should be chamfered.
Who is correct?
Tech A
Tech B
Neither
Both A & B
Tech A states that plastic fillers were designed to replace expensive metal working repair methods.
Tech B states that plastic fillers were designed to repair thinner sheet metal.
Who is correct?
Tech A
Tech B
Both A & B
Neither
Tech A states that a grinding disc can be used if it has a small nick or is partially torn.
Tech B states that a grinding disc can be used at a 10% increase speed over recommended RPM rating.
Who is correct?
Tech A
Tech B
Both A & B
Neither
Tech A states that proper surface preparation begins by washing the area, first with soap and water, then with a wax and grease remover.
Tech B states that surface preparation is only necessary when the vehicle is being completely repainted.
Who is correct?
Tech A
Tech B
Both A & B
Neither
Tech A states that the EPA is the only agency that sets rules for a spray booth.
Tech B states there are several agencies that govern paint spray areas.
Who is correct?
Tech A
Tech B
Both A & B
Neither
Tech A states that booths may not require a sprinkler system.
Tech B states that a sprinkler system is only needed in a booth constructed of wood.
Who is correct?
Tech A
Tech B
Both A & B
Neither
When placing hazardous material in a waste container,
Tech A states that you must close the container when finished.
Tech B states you must close the container at the end of the day.
Who is correct?
Tech A
Tech B
Both A & B
Neither
Tech A states that all fire extinguishers are the same.
Tech B states that fire extinguishers are rated for use on different types of fires.
Who is correct?
Tech A
Tech B
Both A & B
Neither
Tech A states that solvent and paint waste can be burned in an approved furnace.
Tech B states that the waste must be recycled and hauled to a treatment facility.
Who is correct?
Tech A
Tech B
Both A & B
Neither
Tech A states that solvent storage areas are not regulated areas.
Tech B states that solvent storage areas are only regulated by electrical codes.
Who is correct?
Tech A
Tech B
Both A & B
Neither
A new material is being sprayed.
Tech A states that the label will provide safety information and warnings.
Tech B states that MSDS (Material Safety Data Sheets) provides this information.
Who is correct?
Tech A
Tech B
Both A & B
Neither
Tech A states that an employer must check to see that you are wearing your respirator each time you paint.
Tech B states that it is your responsibility to use a respirator when needed.
Who is correct?
Tech A
Tech B
Both A & B
Neither
Tech A states that MSDS sheets for each product used must be in a master file and accessible.
Tech B states that MSDS is only required if a product is used more than twice in the shop.
Who is correct?
Neither
Tech A
Tech B
Both A & B
Tech A states that you are responsible for your own personal safety.
Tech B states that your employer has responsibility for your personal safety.
Who is correct?
Tech A
Tech B
Both A & B
Neither
VOC stands for.
Volatile organic waste
Vast over compensation
Volume of compounds
Volatile organic compounds
