Font size
WorksheetsAU680 TRAINING QUIZ SET B
Total questions: 30
Worksheet time: 15mins
What is the throughput for Beckman Coulter Chemistry Analyzer AU680 (Photometric + ISE optional)?
800
1200
600
1600
How many types of rack applicable in AU Chemistry analyzer series?
4
5
6
7
How many sample position in the STAT Table?
18
22
24
25
How to check the Calibration factor list without using shortcut button or user menu?
Menu > Calibration > Calibration Monitor > Status > Factor List
Menu > Calibration > Calibration Detail > Status > Factor List
Menu > Calibration > Calibration History > Status > Factor List
Menu > Calibration Monitor > Calibration Detail > Factor List
How to check a daily QC without using shortcut button or user menu?
Menu > QC > QC Monitor >Day to Day Chart
Menu > Rack Requisition > QC > QC Monitor > Daily Chart
Menu > QC > QC Monitor > Daily Chart
Menu > Routine > QC > QC specific > Daily Chart
Which of the following stability period for the ISE Reagents once open?
ISE Reference – 2 months / ISE Buffer – 1 month / ISE Mid Standard – 2 months
ISE Reference – 2 months / ISE Buffer – 2 months / ISE Mid Standard – 1 months
ISE Reference – 3 months / ISE Buffer –2 months / ISE Mid Standard – 1 month
ISE Reference – 1 months / ISE Buffer – 2 months / ISE Mid Standard – 1 month
How to run sample in stat table without LIS?
Home Screen > STAT status > Sample>Start Entry >Key in Sample ID>Choose Test/profile>Entry>Exit>Insert Sample into STAT Table>STAT Status>STAT Start
Home Screen > STAT status > select sample > test requisition >Demographic > entry>exit> STAT check > sample assignment > STAT start
Home Screen > test requisition > select sample > STAT status >Demographic > entry>exit> STAT check > sample assignment > STAT start
Home Screen > Demographic > select sample > test requisition >STAT status > entry>exit> STAT check > sample assignment > STAT start
These condition require for re-calibrate except?
Change detergent
Change Calibrator
(The QC is outside SD limit
Change reagent
What is solution used for W1?
2.0% Cleaning Solution
0.5 M HCl
2.0 % detergent
1.0 M HCl
How many samples can continuously run on rack holder for AU680?
150 Sample
200 sample
100 sample
80 sample
What are the two (2) important items need to be changed every time when performing W2?
Reagent Probe and Sample Probe
Sample Syringe and Reagent Syringe
ISE solution and Detergent
Pre Diluents Bottles and Det-1 ( 3 bottles)
How many cuvettes are there in AU680 Chemistry Analyzer?
80
153
165
145
Which are following rack function is correct?
What is the maximum average photocal reading that user needs to change photo lamp?
0.1
3.0
2.0
1.5
How many slot available in the STAT table?
22 slot for sample, 4 for ISE, 1 for Maintenance, 2 for Blank
22 slot for sample, 4 for ISE, 2 for Maintenance
23 slot for sample, 6 for ISE, 3 for Maintenance
23 slot for sample, 6 for ISE, 3 for Maintenance
What is the correct sequence to perform an Emergency Stop and Restarting system?
Turn Off CPU – Push Emergency Stop Button – Turn Off Monitor – Push Power ON Button
Push Emergency Stop Button – Push Reset Button – Turn Off CPU – Push Power ON Button
Push Emergency Stop Button – Turn off CPU – Push Reset Button – Push Power ON Button
Turn Off CPU – Push Emergency Stop Button – Push Reset Button – Push Power ON Button
Which are the following is true about selectivity check procedure?
Perform selectivity check whenever doing priming
Perform selectivity check whenever calibrating ISE
Perform selectivity check daily
Perform selectivity check should be performed after a successful calibration
Which of the following are the factors that affect a calibration result? Hint: More than 1 answer option
Reagent Stability
Calibrator preparation
Quality control preparation
Parameter Set up
Which of the following are the factors that affect a Quality Control result?
I. Parameter
II. Calibration
III. Index
IV. Reagent
I and II
I and III
I, II and III
I, II and IV
What are solutions used for W2?
I. 0.5% Cleaning Solution
II. 1.0% Cleaning Solution
III. 1M HCL
IV. 1M NaCL
I and III
II and III
I and IV
II and IV
Please check the following match which one is correct?
A- Reagent Compartment
B- ISE Compartment
H- STAT Compartment
I- Mixer
J- Sample Probe
A, B and J
B, H and I
J, I and H
H, A and J
Please choose the correct sequence for sample processing?
1>3>4>2>7>9>8>6>5
1>2>3>4>5>6>7>8>9
9>8>7>6>5>4>3>2>1
2>4>6>8>1>3>7>9>5
Please choose the correct match. Hint: More than 1 answer option
A- Home
C- Menu List
E- Shutdown
D- Stop/ Standby
B- User Menu
Please choose the correct match. Hint: More than 1 answer option
61- Reagent Probe
62- Reagent Probe
63- Reagent Probe
64- Sample Probe
65- Reagent Probe
Where should you go to view the system temperatures? Circle the correct answer
Start Condition
Analyzer Status
Analyzer Maintenance
Sample Status
(ISE Labs only) Identify the reagents used by the ISE module Hint: More than 1 answer option
ISE Buffer Solution
ISE Mid Standard Solution
Cleaning Solution
ISE Reference Solution
(ISE Labs only) TRUE or FALSE?
You need to press the green TABLE ROTATION/DIAG button on the analyzer to start the ISE Cleaning procedure.
TRUE
FALSE
What should you select to identify the Onboard Stability of reagents?
Reagent Inventory
Reagent Consumption
Reagent Check
Detail Tab
Identify the options available when performing a reagent check. Hint: More than 1 answer option
Check all positions
Check specified positions
Check changed positions
Reset Only
Choose the statement that is false when loading racks in the rack feeder
Caps should be removed from all sample containers
The rack should be placed in the rack feeder with the rack bar code facing the back of the analyzer
Manually programmed samples require a bar code if the analyzer is set for Barcode analysis
When calibrating, always place the yellow racks in front of the blue rack
