Font size
WorksheetsSafety
Total questions: 22
Worksheet time: 11mins
What is the number one cause of accidents in the shop?
Splinters
Slips, Trips, and Falls
Burns
Horseplay
PPE stands for?
Protective People Everywhere
Proper Personal Equipment
Personal Protective Equipment
Personal Protective Equilibrium
What do you do if you wear glasses for eye sight in the shop?
Get prescription safety glasses made
Wear safety glasses over your regular glasses
Nothing glasses are safe enough
Either A or B
Ear protection is needed when machines are over __________ decibels for _______ hours.
80, 1
90, 1
100, 7
20, 2
To use the fire extinguisher properly you pull the pin, _________, squeeze the trigger, and _________ side to side.
Aim, Sweep
Look, Shoot
Throw, Jump
Look, Move
Before using a power tool you should check for:
Damage
If it's plugged in
If the blade is sharp
Proper Branding
Who is responsible for safety in the shop?
No one
The teacher
Everyone
The administration
Most accidents are
Preventable
The teacher's fault
Just something we have to deal with
A and B
Safety glasses must have what numbers on them to be safe in the shop?
X88.2
M24.9
287
Z87.1
What safety dress is required in the shop? (select all that apply)
Closed toed shoes
Shorts
Short sleeved shirt
Hoodies
What personal items are not allowed in the shop? (select all that apply)
Jewelry
Backpacks
Phones
Food and Drinks
Hard hats must be worn
Whenever we are in the shop
Whenever there is possible danger of head injury
Only when working off the ground
When working outside
If the cut you are about to make doesn't feel safe?
Go ahead and try it
Find another way to make the cut
Ask your friend if he thinks it ok
Ask your instructor if it is safe
A respiratory hazard is?
Dust or Chemical Vapors
Splinters
Danger when using a ladder
Something that might hit your head
What is the proper PPE for respiratory hazards?
Safety glasses
gloves
dust mask or respirator
hardhat
When using a table saw, stand directly behind the blade and push stock.
Yes
no
When using a circular saw hold the saw with both hands.
Yes
No
If tools or equipment become damaged, you should?
fix them
put an “out of order” sign on them
report them to the instructor
use them anyway.
To put out a wood fire you should use?
A class A fire extinguisher
A class B fire extinguisher
A class C fire extinguisher
A class D fire extinguisher
At what height must fall protection be used in construction?
2 ft
4 ft
8 ft
6 ft
Slips, trips, and falls often happen because?
Improper PPE
Other people weren't paying attention
The shop is a dangerous place
Of a messy work place
All tools should be maintained and stored correctly.
Yes
No
