WorksheetsElectronics
Total questions: 75
Worksheet time: 55mins
Resistance in an electrical circuit is measured in:
Volts (V)
Amps (A)
Farads (F)
Ohms (Ω)
Which of the following electronic components used in class functions as a switch?
Resistor
Diode
Transistor
Capacitor
If electricity in a circuit is compared to water flowing in a river. The slope of the river could be compared to the:
Voltage
Current
Resistance
Capacitance
For an electrical circuit where the resistance is kept constant and the voltage is increased, what will happen to the current?
Current increases
Current decreases
No change in current
You can't tell from the information given
A circuit fault where too much current flows due to low resistance, possibly creating an unsafe situation, is called:
An open circuit
A hazardous loop
A short circuit
A closed loop
In the image of a DC Motor shown. A is the:
Armature
Stator
Commutator
Brush
Field Winding
In the image of a DC Motor shown. A is the:
Armature
Stator
Commutator
Brush
Field Winding
Which one of these is a use of LDR
Tubelight
Street lights
Fan
Sun
Digital sensors help to __________
Store charge and release it when required
Observe things clearer
Produce charge
Which sensor is used when parking cars to judge distance?
Distance
Proximity
Pressure
Movement
This sensor is used for burglar alarms
Temperature
Humidity
Movement/Motion
PH
Type of sensor used to detect both metallic and non-metallic objects
Capacitive sensors
Inductive sensors
Thermocouple sensors
None of the above
What kind of charge does static electricity produce
Positive
Permanent charge
Negative
Temporary charge
Transistors act like tiny "____________."
Electron sources
Switches
Batteries
Bees?
What are the names of the terminals X, Y and Z?
X = Base, Y = Collector, Z = Emitter
X = Emitter, Y = Base, Z = Collector
X = Collector, Y = Base, Z = Emitter
X = Collector, Y = Emitter, Z = Base
Diagram shows a light controlled switch. The alarm will be activated when
the surrounding is dark
the surrounding is bright
the temperature of the surrounding is high
the temperature of the surrounding is low
The street lights use electronic control system that switches the lights on when the surrounding is dark. What is the input sensor of the control system?
A thermistor
A light emitting diode
A microphone
A light dependent resistor
One function of the transistor is to_____________?
rectify
amplify
limit
control
transistor has 3 electrodes namely
PNP
NPN
Base/ Collector/ Emitter
Drain/ Gate/ Source
A parallel circuit is brighter because...
All the lamps share the current from the battery
Each lamp has its own pathway to the battery
The lamps have larger filaments, so they are brighter
There is only one pathway
The pathway through which electricity flows
Circuit
Red or black wires
Current
battery terminals
Our 9 volt batteries have this type of current
variable
indirect
alternating
direct
The red wire coming from the battery is the
neutral wire
positive wire
negative wire
When a switch is open the lamp...
Will be on
Will be off
Will be making a short circuit
An example of a good insulator is
Copper
Plastic
Water
aluminum
The filament in an incandescent light glows because....
The electrons are crowded and the filament heats up
The electrons flow faster and the filament heats up
The electrons stop flowing when the reach the filament
Which is the most efficient type of light bulb?
Incandescent
Fluorescent
CFL
LED
What does this schematic symbol represent?
Capacitor
Lamp
Resistor
Battery
What does this schematic symbol represent?
Wire
Resistor
Lamp
Switch
What does this schematic symbol represent?
Lamp
Wire
Switch
Resistor
What does this schematic symbol represent?
Switch
Lamp
Wire
Resistor
The two connectors on the battery are called...
Resistors
Terminals
Switches
Snaps
A series circuit has dim lamps because...
Each lamp has it's own pathway to the battery
Each lamp is side by side
The lamps have to share the current
The lamps amplify the current
Touching the red and black wires from the battery together..
Makes the battery work better
Creates a series and parallel circuit
Creates a short circuit
In which circuit are the lamps connected so that they all work at normal brightness?
What is the name of an object that opposes to electrity?
Circuit
Resistance
Electron
Current
What is the act of electricity passing throught an object
Charge
Resistance
Ampere
Conduct
Charge is?
electricity
Rauw alejandro
the electric property of an object that makes it have a negative or positive force
electric current
Resistivity of a wire depends on
length.
material
cross section area.
all of the above
The above half wave form is created by an AC going into which circuit?
single diode
Bridge rectifier
Transformer
Voltage regulator
An oscilloscope shows the current flow above what type of current is it showing?
DC
AC
Rectified Current
Non rectified current
DC
AC
rectified current
non rectified current
The above half wave form is created by an AC going into which circuit?
single diode
Bridge rectifier
Transformer
Voltage regulator
What electrical component is used to smooth half wave current signals?
Resistor
Diode
Capacitor
Voltage regulator
what is troubleshooting?
It is a problem solving applied to repair failed process
It is a fight between 2 computers
It means..trouble ปัญหา, shoooting การยิง
Why does the technician opening up the PSU touch the heatsinks with the screwdriver first?
to eliminate static charge
to make sure they are not hot
for good luck
to disable the PSU
The four basic circuit blocks that make up a power supply respectively are:
transformer, clipper, filter, regulator
rectifier, clamper, filter, regulator
transformer, rectifier, inverter, regulator
transformer, rectifier, filter, regulator
