NEW
Font size
WorksheetsDE 1.1.5 - 1.1.9
Total questions: 16
Worksheet time: 8mins
Science disciplines use Conventional Current, whereas the engineering disciplines use Electron Flow .
True
False
The flashlight shown uses a 6 volt battery and has a bulb with a resistance of 150 W. When the flashlight is on, how much current will be drawn from the battery?
0.4 A = 4.0 mA
0.04 A = 40 mA
40 A
Sq = u = i/b
An electronic device that is used to control the flow of electricity in electronic equipment with at least three electrodes. A small voltage controls a larger voltage.
•Can act as an amplifier.
•Can act as a switch.
Switch
Ransistor
Inverter
Transistor
An electronic circuit having many components, such as transistors, diodes, resistors, and capacitors in a single package. Select the most fitting answer:
Microcontroller Chip
gate element
Integrated circuit
coffee milk
The inputs of a truth table have a consistent pattern of ......
electron flow
mirroring the resistance
doubling
outputs
The truth table in the image above would coincide with which gate:
And
Nand
Or
Nor
The Gate on the top left is a .........
Not Gate (inverter)
And Gate
Nor Gate
NOR gate
The gate on the bottom left is a .........
Not Gate (inverter)
And Gate
Nor Gate
NOR Gate
In order to get information on specific IC's and Gates you need to look up and extract information from a
manufacturing electronics plant
data sheet
multisim number
hand calculations of circuit
The most important rule when soldering is to always wear ____________ _______________ so you do not get solder in the eye socket
long johns
gloves
safety goggles
water
The tip must be kept coated with a shiny layer of solder by occasional wiping and applying solder directly to the tip. This process is called
soldering
wetting
cutting
tinning
This is a great example of a perfect solder connections!!
True
False
Would this solder connection work?
Yes
No, the prong is not snipped
No, to little solder
The image below is an example of a solder connection that will not work, it is known as an ........
solder bridge
conjoined solder
over connected
it would work
Is the resistance in this circuit solved correctly
No it should be .33 ohms
No it should be 27 Kohms
Yes
solder it
Finish this statement..... 1 0 0 1 Soldering
is not fun
is fun
Where's my meatball?
