wayground logo

Free Printable Worksheets

NEW

Font size

S
M
L
XL
Worksheets

NSTMOP Part 2

Total questions: 25

Worksheet time: 13mins

Name
Class
Date
1.

Three safety start mechanisms used on modern tractors to prevent starting the tractor improperly include:

a)

ROPS, seat belts, and PTO stub guards

b)

neutral start switch, starter bypass covers, seat safety switch

c)

PTO shields, hydraulic power, electrical connections

d)

user ID, password, seat switch

2.

What must you do to the tractor engine before engaging the PTO to operate an implement?

a)

slow down the RPMs

b)

speed up the RPMs

c)

maintain idle speed

d)

RPMs do not affect PTO operation

3.

A tractor has one seat for the operator. Passengers should:

a)

stand on the drawbar

b)

hold onto the fenders

c)

sit on the axle

d)

never be allowed to ride on the tractor

4.

Pushing one brake on a tractor while operating at a high speed can cause the tractor to:

a)

stop immediately

b)

rollover backward

c)

stall

d)

rollover sideways

5.

Only start the tractor engine from:

a)

the ground

b)

the operator's seat

c)

standing on the platform

d)

standing on the steps

6.

To steer a tractor and implement safety, you need to know which of the following:

a)

width and power of the tractor

b)

only the width of the implement

c)

width and length of the tractor and the implement

d)

all of the above

7.

Controls that engage mechanisms using the tractor as a remote power source are color-coded:

a)

yellow

b)

red

c)

orange

d)

black

8.

True or False? Each tractor's clutch engages at the same point and has exactly the same feel.

a)

True

b)

False

9.

True or False? Use a lower gear to start moving and a higher gear for operation.

a)

True

b)

False

10.

True or False? For every degree the tractor is turned tighter, there is an equal amount of increased

centrifugal force.

a)

True

b)

False

11.

True or False? Centrifugal force increases in strength equal to the increase of the tractor's speed.

a)

True

b)

False

12.

True or False? The heavier the load and the higher the "angle of pull," the more leverage the load has to tip

the tractor rearward.

a)

True

b)

False

13.

True or False? Tractors are exempt from following all traffic laws.

a)

True

b)

False

14.

True or False? SMV emblems are made of a material that does not fade and never needs to be replaced.

a)

True

b)

False

15.

True or False? A person can easily be knocked out of a pan-type tractor seat.

a)

True

b)

False

16.

True or False? Almost all tractors are equipped with a ROPS and a seat belt regardless of their age.

a)

True

b)

False

17.

True or False? Young, inexperienced operators are often assigned to the newer and safer tractors and

equipment.

a)

True

b)

False

18.

True or False? Youth should never operate a tractor without a ROPS and a seat belt.

a)

True

b)

False

19.

True or False? Tractor manufacturers have particular RPM recommendations for the various jobs a tractor

will do.

a)

True

b)

False

20.

True or False? It is OK to operate an engine with low oil pressure or oil levels.

a)

True

b)

False

21.

True or False? Push-pull fuel switches must remain in the stop position when turned off.

a)

True

b)

False

22.

True or False? Ground speed controls are designed to be used by pushing forward to move forward and

pulling to the rear to move the tractor in reverse.

a)

True

b)

False

23.

True or False? Gasoline engines do not give off dangerous fumes.

a)

True

b)

False

24.

True or False? Diesel engines have spark plugs.

a)

True

b)

False

25.

True or False? Relieving hydraulic line pressure when shutting down the tractor will make attaching the

lines easier.

a)

True

b)

False