NEW
Font size
WorksheetsPT 1: 3 of 3
Total questions: 22
Worksheet time: 11mins
Which of the following network infrastructure implementations would be used to connect two remote sales machines back to the main campus for all of their data and voice network traffic?
Crossover cable
Single mode fiber
Satellite
MPLS
Which of the following threats can policies, procedures, and end-user training help to effectively mitigate?
Zero-day attacks
Attempted DDoS attacks
Man-in-the-middle attacks
Social engineering attempts
Your company has just gotten a new OC-12 installed to support your server room. You connect the OC-12 to your network, but you are noticing a large amount of dropped packets and errors. You suspect this may be a layer 1 issue. Which of the following should you attempt FIRST to identify the source of the issue?
Determine if any devices may be causing EMI on the cable
Use a pinout tester to validate the cable's integrity
Use an OTDR to validate the cable's integrity
Use a multimeter to validate the cable's integrity
You are working as a network administrator and are worried about the possibility of an insider threat. You want to enable a security feature that would remember the Layer 2 address that is first connected to a particular switch port in order to prevent someone from unplugging a workstation from the switch port and connecting their own laptop to that same switch port. Which of the following security features would BEST accomplish this goal?
NAC
Sticky MAC
802.1x
ACL
This morning, you have received multiple calls from users reporting that they cannot access websites from their work computers. You decide to troubleshoot the issue by opening up your command prompt on your Windows machine and running a program to determine where the network connectivity outage is occurring. Which tool should you use to determine if the issue is on the intranet portion of your corporate network or if the issue is occurring due to a problem with your ISP?
netstat
nslookup
ping
tracert
What happens when convergence on a routed network occurs?
All routers are using hop count as the metric
All routers have the same routing table
All routers learn the route to all connected networks
All routers use route summarization
The accounting department has been relocated to a new area of the building which is more than 70 meters away from the closest IDF. In order to comply with a SLA which requires that 10Gb speeds be provided, what type of media should be installed?
CAT6a
CAT5e
802.11n
802.11ac
A network administrator receives a call asking for assistance with connecting to the network. The person on the phone asks for the IP address, subnet mask, and VLAN required to access the network. What type of attack might this be?
Social engineering
Spoofing
Zero-day attack
VLAN hopping
What would be used in an IP-based video conferencing deployment?
RS-232
56k modem
Bluetooth
Codec
A network administrator is assigned an approved change request with a change window of 120 minutes. After 90 minutes, the change is stuck on step five of a five-step change. The network manager decides to initiate a rollback. Which describes what the network administrator should do next?
Return the system to step four since this was the last working step
Request additional time since the change is near completion
Leave the change as is and inform users of a workaround
Return the system back to the original state before the change
A technician is called to investigate a connectivity issue to a remote office that is connected by fiber optic cable. Using a light meter, it is determined that the Db loss is excessive. The installation has been working for several years. The switch was recently moved to the other side of the room and a new patch cable installed. Which of the following is most likely the reason for this problem?
Distance limitations
Wavelength mismatch
Bend radius limitation
Dirty connectors
An organization requires a second technician to verify changes before applying them to network devices. When checking the configuration of a network device, a technician determines that a coworker has improperly configured the AS number on the device. Which of the following might be the result of this?
The OSPF not-so-stubby area is misconfigured
Reduced wireless network coverage
Spanning tree ports in flooding mode
BGP routing issues
An administrator is upgrading the switches in the server room to support 10 Gbps of throughput. The switch will need to take advantage of the existing CAT6a lines that run to each server. Which of the following Ethernet standards should be used to meet this requirement?
10GBaseT
10GBaseFX
10GBaseSR
10GBaseSW
While troubleshooting, a technician notices that some clients using FTP still work and that pings to the local routers and servers are working. The technician tries to ping all known nodes on the network and they reply positively, except for one of the servers. The technician notices that ping works only when the host name is used but not when FQDN is used. What server is MOST likely offline?
WINS server
Domain controller
DHCP server
DNS server
Your physical security manager, Janice, wants to ensure she can detect any unauthorized access to the datacenter. Which technology should be used to meet her requirement?
Smart card
Biometric access
Video surveillance
Access badge reader
Which of the following is a logical host on the network where unauthorized users are placed in which they still believe they're on the production network?
Virtual server
VLAN
Honeypot
Virtual terminal
When a criminal or government investigation is underway, what describes the identification, recovery, or exchange of electronic information relevant to that investigation?
Data transport
First responder
eDiscovery
Encryption
You have been asked to install a media converter that connects a newly-installed multimode cable to an existing CAT5e infrastructure. Which type of media converter should you use?
Ethernet to coaxial
Fiber to Ethernet
Fiber to coaxial
Multimode to single mode
A project manager is tasked with the planning of a new network installation. The customer requires that everything discussed in the meetings will be installed and configured when a network engineer arrives onsite. Which document should the project manager provide the customer?
Acceptable Use Policy
Service Level Agreement
Statement of Work
Security Policy
A network engineer is designing a campus-wide wireless network. Wireless access points will be distributed across the campus for maximum availability. The network is to be designed to handle a large number of roaming wireless devices. What feature should he employ?
VLAN pooling
Subnetting
WPA2
LWAPP
Which protocol is used to establish a secure and encrypted VPN tunnel that can be initiated through a web browser?
PPP
PPTP
SSL
IPSec
What Ethernet feature will allow increased FCoE network throughput as long as all network devices recognize its specific size?
Frame relay
TCP offloading
Jumbo frame
Quality of Service
