NEW
Font size
S
M
L
XL
WorksheetsDrafting and Illustrations
Total questions: 50
Worksheet time: 25mins
Name
Class
Date
1.
This is the innermost part of the pencil which is used to draw lines.
a)
Wood
b)
Body
c)
Lead
d)
None of the above
2.
The metal part of the pencil which holds and clamps both the eraser and its body
a)
Ferrule
b)
Ferrero
c)
Clasp
d)
Lead
3.
A standard pencil uses a naturally occurring form of crystalline carbon used to write or draw lines. What is this which is best used when sharpened properly?
a)
Charcoal
b)
Iron
c)
Ink
d)
Graphite
4.
A type of pencil that is retractable and can be loaded by thin leads
a)
Conventional Pencil
b)
Standard Pencil
c)
Mechanical Pencil
d)
None of the above
5.
The rubber part of the pencil which is rubbed across the written part to remove unwanted lines or smudges
a)
Lead
b)
Wood
c)
Stamp
d)
Eraser
6.
In most pencils, the body is usually made of tough material to protect the innermost part of it. What material is used?
a)
Plastic
b)
Rubber
c)
Metal
d)
Wood
7.
In pencil leads, the letter H stands for:
a)
Hue
b)
Highlight
c)
Heavy
d)
None of the above
8.
In pencil leads, the letter B stands for:
a)
Bold
b)
Bright
c)
Black
d)
Brown
9.
Which of the following pencil leads is equivalent to pencil #2?
a)
H
b)
F
c)
HB
d)
B
10.
Which of these pencil leads is the softest?
a)
HB
b)
3H
c)
3B
d)
B
11.
Which of the following pencil leads is the hardest?
a)
HB
b)
7B
c)
5H
d)
2H
12.
Which of the following leads is most suitable in creating thick lines?
a)
#1
b)
#2
c)
#3
d)
#4
13.
Which is true about using Soft leads:
a)
It is recommended in creating guidelines
b)
It creates lighter and thin lines
c)
It creates thick and darker lines
d)
None of the above
14.
A type of triangle that can be used in drawing diagonal line when creating orthographic projection
a)
45-degree triangle
b)
30-60-degree triangle
c)
French curve
d)
None of the above
15.
It refers to the height of the letters or numbers.
a)
Weight
b)
Nominal Size
c)
Angle
d)
None of the above
16.
When creating border lines, which pencil lead is recommended?
a)
#3
b)
HB
c)
4H
d)
2B
17.
Which pencil lead is recommended if you are to draw guidelines?
a)
HB
b)
#1
c)
3H
d)
6B
18.
Which is NOT true about guidelines?
a)
It should be dull and light
b)
Letters should maximize the use of guidelines
c)
#1 lead pencil is recommended
d)
All of the above
19.
Which tool is best used to create round objects?
a)
Protractor
b)
Ruler
c)
Compass
d)
None of the above
20.
How long is a standard ruler?
a)
12 inches
b)
30cm
c)
1 foot
d)
All of the above
21.
A tool used as a guide to determine angles
a)
Divider
b)
Protractor
c)
Compass
d)
T-square
22.
A device used as guide to create arcs and circles.
a)
Compass
b)
Divider
c)
Protractor
d)
Ruler
23.
A type of pencil that is retractable and can be loaded by thin leads
a)
Conventional Pencil
b)
Standard Pencil
c)
Mechanical Pencil
d)
All of the above
24.
Also called as engineering drawing, this is a type of drawing where details of an object are drawn with regards to set of rules to allow its readers to interpret how an object is made.
a)
Illustration
b)
Technical Drafting
c)
Animation
d)
None of the above
25.
A type of drawing where it shows different sides of an object. With this technique, it uses projection and diagonal lines to create multiple sides.
a)
Isometric Drawing
b)
Orthographic Projection
c)
3D Drawing
d)
None of the above
26.
Which is the opposite of Front view?
a)
Bottom view
b)
Rear view
c)
Both A and B
d)
None of the above
27.
Which is the opposite of the top view?
a)
Bottom view
b)
Side view
c)
Front view
d)
None of the above
28.
At least how many views shall be shown in an orthographic projection?
a)
3
b)
4
c)
5
d)
6
29.
How many types of principal views are there?
a)
3
b)
4
c)
5
d)
6
30.
Projection lines should be as thick or thin as what?
a)
Border lines
b)
Guidelines
c)
Dimension lines
d)
None of the above
31.
The diagonal line when creating projection lines measures an angle of:
a)
30 degrees
b)
45 degrees
c)
60 degrees
d)
90 degrees
32.
Which type of view is ideally the first to be drawn?
a)
Top view
b)
Right side view
c)
Front view
d)
None of the above
33.
The term "dimension" in technical drawings refer to:
a)
Lines
b)
Measurement
c)
Spaces
d)
Text
34.
Ideally, top views can be drawn in which side from the front view?
a)
Above
b)
Right side
c)
Left side
d)
None of the above
35.
If there is no triangle available, an angled line can be made when a ruler can be used if paired with:
a)
Divider
b)
T-square
c)
Compass
d)
Protractor
36.
A type of 3D drawing where 3 principal views are shown:
a)
Isometric Drawing
b)
Orthographic Projection
c)
Site Development Plan
d)
Elevation Drawing
37.
If a line is to be drawn behind the front or visible surface, it is either should be removed or use:
a)
Solid lines
b)
Projection lines
c)
Dimension lines
d)
Broken lines
38.
How many principal views are visible when creating isometric drawings?
a)
3
b)
4
c)
5
d)
6
39.
At what certain angle should the isometric drawing be elevated?
a)
30 degrees
b)
45 degrees
c)
60 degrees
d)
90 degrees
40.
A circle drawn in isometric view will look line a/an:
a)
Oblong
b)
Oval
c)
Ellipse
d)
All of the above
41.
In creating isometric drawings, which tool is considered most essential in creating lines and angles?
a)
45-degrees triangle
b)
30-60-degrees triangle
c)
French curve
d)
Ruler
42.
Another term for an ellipse is called:
a)
Oblong
b)
Oval
c)
Spheroid
d)
Isometric circle
43.
Which is NOT true about diameter?
a)
It is the distance from the center to any point of a circle
b)
It is the longest distance from one point of a circle to another point
c)
It is twice the radius
d)
None of the above
44.
A radius is considered as:
a)
Twice the measurement of the diameter
b)
Half of the measurement of the diameter
c)
The distance traveled around the circle
d)
None of the above
45.
If a given radius is 5cm, its diameter is?
a)
2.5cm
b)
5cm
c)
10cm
d)
None of the above
46.
A technique which uses definite ratio to maximize the size of the drawing. This will enlarge or make smaller drawings of a figure
a)
Division
b)
Scaling
c)
Resizing
d)
None of the above
47.
If the scale of an object is 1:50, then each measurement should be divided by:
a)
1
b)
5
c)
50
d)
150
48.
Which principal view is usually not seen in isometric drawing
a)
Front view
b)
Side view
c)
Top view
d)
Rear view
49.
What should you be doing in this time of national emergency?
a)
Stay at home and avoid attending social gatherings
b)
Always wash hands and limit physical contact to objects, animals and people
c)
Avoid sharing non-sense matters that may cause panic and premature assumptions about the disease including fake news.
d)
All of the above
50.
Where are you right now?
a)
Mall
b)
Court
c)
Park
d)
Home
Reset
