Font size
WorksheetsBEAMS and TRUSSES
Total questions: 25
Worksheet time: 7mins
Statically beams are
The beams which can be analysed completely using equations of equillibrium
The beam which can be analysed using static equations
Fixed beams at both ends
None of the above
The number of reaction components at the fixed end of beam are
2
3
4
1
UDL stands for (a)
UVL stands for (a)
Fixed beams are
One end fixed and other end free
both ends fixed
one end fixed and other end simply supported
both ends are roller support
one end fixed and other end roller/hinged is called as _______beam
cantilever
propped cantilever
overhanging
none of the above
the reaction line rpller suppot with respect to point of contact is
obligue
perpendicular
obtuse
parallel
when load acts at constant rate at a given length of beam is called
UVL
point load
UDL
Triangular load
A BEAM HAVING ONE END ROLLER SUPPORT AND ONE END HINGED SUPPORT SUBJECTED TO VERTICAL LOADING CAN BE REGARDED AS
FIXED BEAM
SIMPLY SUPPORTED BEAM
CANTILEVER BEAM
OVERHANGING BEAM
THE BEAM WHOSE ONE END IS FIXED AND OTHER END IS FREE REFERRED TO AS
SIMPLY FIXED BEAM
SIMPLY SUPPORTED BEAM
CANTILEVER BEAM
FIXED BEAM
A BEAM WITH THREE OR MORE THAN THREE SUPPORTS IS CALLED AS
CANTILEVER BEAM
FIXED BEAM
CONTINUOUS BEAM
FIXED BUT
ROLLER SUPPORT IN THE BEAM WILL HAVE HOW MANY UNKNOWN REACTIONS
3
1
2
NO REACTION
WHAT NATURE OF FORCES DEVELOPED IN THE MEMBERS OF TRUSSES
(a)
THE FORCES IN THE MEMBERS ARE _______ IN NATURE
BILATERAL
AXIAL
BI-AXIAL
CUMMULATIVE
TRUSSES CARRY LOADS AT
ENDS
JOINTS
BOTH A & B
NONE OF THE ABOVE
ANALYSIS OF TRUSS CAN BE DONE USING
(a)
__________ is a structure made of slender members which are joined together at their end points.
TRUSS
BEAM
PILLAR
SUPPORT
The centroid of triangle from its lower intensity end or apex is always
half of its distance
2/3rd of its distance
full length of its distance
1/3rd of its distance
what are the various types of loads acting on a beam
(a)
HInged or Roller support will have _____ reactions
3
2
1
none of the above
In a beam of 6 m span with one end hinged and other on roller if 30 kN-m moment is acting at 2 m from support A, then the reaction at A is
15 kN
7.5 kN
5 kN
4 kN
Which one of the following is indeterminate beam?
Simply supported beam
One end hinged, other on roller
Cantilever
Both ends hinged
In the truss shown in figure below zero members are
BC and CD
BE, BC, CD
BC, CD and AE
BC, CD and DE
Which one of the following is wrong in the list of assumptions for the analysis of pin jointed truss?
Load acts at joint only
Self-weight neglected
Loads act vertically
Ends of members are pin connected
Free-body diagram means .
the diagram drawn with free hand
the diagram of a body with applied forces
the diagram of a body with applied forces, self-weight and reactions
the diagram of a freely suspended body
