The study of the internal effects of external forces.

Transfers load via a series of interlinked components and depended upon geometry and orientation of its components (i.e. vector quality)

Similar to form-active applied loads are redirected by the shape of the structure.

Which is an example of a section active?

Total torque or moment acting on then object must be equal to zero.

Load that is applied parallel to the length of the member/object.

Forces that occur on 3 axes. Can be concurrent, parallel, non-concurrent & non-parallel

What type of load is this?

This is a type of load in motion.

This is not capable of resisting bending, moment, and shear.

What type of Truss is this?

Measures the amount of deformation compared to the original shape of the object or material.

The ability of a material to hold itself together despite

being subjected to forces.

The intensity or magnitude of force carried.

The intensity or magnitude of force carried.

Horizontal structural

members designed to resist

lateral loads.

This type of beam is supported by more than 2 points along its span.

Circular beam that transmits power to the machinery.

Structural system relying on cantilevered column elements to resist lateral loads.

The lateral stiffness of a storey should be ______ of the storey above.

This type of plan structural irregularity's maximum storey drift of one end of the structure is 1.2x more than the structure’s average storey drift.

Beams and columns not exposed to weather should have a concrete cover of ______.

This type of plastic pipe can withstand higher temperatures than other plastic pipes.

Which is a type of metal pipe?

This uses two end pieces

attached on the pipe ends, and a

center piece drawing the two pieces

together as it is rotated

Which is NOT a type of valve?

A receptor floor drain shall now be less than _____ slope nor more than _____ slope.

This method of water purification is done by spraying water into the atmosphere to remove entrained noxious gases.

A well should be at least _____ away from pollution sources

This type of pump is more efficient for viscous fluids.

1 Water Supply Fixture Unit = ____ gallons of water per minute.

Which is an advantage for using Air Pressure System for cold water distribution within buildings?

What is the minimum distance of building sewers from wells and bodies of water?

This type of of vent prevents pressure changes in the stack.

1 Drainage Fixture Unit (DFU) = _____ gal/min.

What is the minimum trap diameter for floor sinks?

This creates a vacuum that breaks the trap seal.

A watertight receptacle designed to receive the discharge of sewage from a building sewer, separate solids from the liquid, and digest organic matter.

This is located outside the building for additional water supply

Location of LPG Gas cylinders should maintain at least 2ft distance from drains, culverts, or entrances.

1 Ton of Refrigerant (TR) = ______ British Thermal Unit (BTU) = _____ Horsepower

What pipe color is used for low pressure gas?

What is the pipe color for low pressure steam?

Constant Air Volume (CAV) – varying airflow, constant temperature

Termination point of downspouts

Water is pumped into a large tank on top of the building

and distributed to the fixture via gravity.

A submersible well pump should be at least ______.

Which is a disadvantage of using Natural Surface Water as source of water for domestic use?

Chlorination is a type of correction process used for what water quality problem?