NEW
Font size
WorksheetsPhysics Quiz: Chapter 4.1 Uses of C.R.O (Electronics)
Total questions: 10
Worksheet time: 10mins
Diagram shows a waveform on cathode ray oscilloscope (CRO) screen. If the Y-input of CRO is set at 5.0 V cm–1, what is the peak voltage?
Rajah menunjukkan suatu bentuk gelombang pada suatu skrin osiloskop sinar katod (OSK). Jika input-Y pada OSK dilaraskan pada 5.0 V cm–1, berapakah voltan puncaknya?
2 V
5 V
10 V
20 V
Diagram shows the trace displayed on the screen of a cathode ray oscilloscope. Which diagram shows the correct trace when the time-based switch is off?
Rajah menunjukkan surihan pada skrin sebuah osiloskop sinar katod. Rajah manakah menunjukkan surihan yang betul apabila suis asas masa dimatikan?
What particle is found in the cathode ray?
Apakah zarah yang terdapat dalam sinar katod?
Proton
Proton
Neutron
Neutron
Electron
Elektron
Which of the following is false about cathode rays?
Antara berikut yang manakah salah tentang sinar katod?
It is positively charged
Ia bercas positif
It travels in straight line
Ia merambat dalam garis lurus
It deflects in magnetic field
Ia dipesongkan dalam medan magnet
It deflects in electric field
Ia dipesongkan dalam medan elektrik
Diagram shows the structure of a cathode ray oscilloscope. What is component C and D?
Rajah menunjukkan struktur osiloskop sinar katod. Apakah komponen C dan D?
C: Cathode / Katod
D: Control Grid / Grid kawalan
C: Control Grid / Grid kawalan
D: Focusing anode / Anod memfokus
C: Accelerating anode / Anod memecut
D: Focusing anode / Anod memfokus
C: Focusing anode / Anod memfokus
D: Accelerating anode / Anod memecut
Diagram shows the trace on a CRO screen. The Y-gain and the time-base are set at 3 volt / division and 5 ms / division respectively. What is the peak voltage and the frequency of the alternating current supply that connected to the C.R.O?
Rajah menunjukkan surih di atas skrin OSK. Gandaan-Y dan dasar masa telah disetkan pada 3 volt / bahagian dan 5 ms / bahagian masing-masing. Apakah voltan puncak dan frekuensi arus ulang alik yang disambungkan ke OSK?
0.2 Hz
0.04 Hz
40 Hz
200 Hz
What is thermionic emission?
Apakah pancaran termion?
The process of converting alternating current to direct current
Proses penukaran arus ulang-alik kepada arus terus
The adding of small amount of impurities into a semiconductor
Penambahan unsur bendasing ke dalam semikonduktor
The beam of electrons moving from cathode to the anode
Alur elektron yang bergerak dari katod menuju ke anod
The release of electrons from a metal surface when heated
Pembebasan elektron daripada permukaan logam yang dipanaskan
Diagram shows a vacuum tube used to investigate a thermionic emission. What is the function of cathode?
Rajah menunjukkan sebuah tiub vakum digunakan untuk menyiasat pancaran termion. Apakah fungsi katod?
to produce the electron when it is heated by a filament
untuk menghasilkan elektron apabila ia dipanaskan oleh filamen
to accelerate the electron at a high speed
untuk memecut elektron pada kelajuan tinggi
to control the intensity of electron beam
untuk mengawal keamatan alur elektron
to deflect the electron beam vertically
untuk memesong alur elektron secara menegak
Diagram shows a trace seen on a Cathode Ray Oscilloscope (CRO) screen.
The Y-gain and the time-base are set at 1.5 volt / division and 5 ms / division respectively. What is the frequency of the alternating current power supply that is connected to the C.R.O?
Rajah menunjukkan surihan di atas skrin Osiloskop Sinar Katod (OSK).Gandaan-Y dan dasar masa telah disetkan pada 3 volt / bahagian dan 5 ms / bahagian masing-masing. Hitung frekuensi arus ulang alik yang disambungkan ke OSK?
0.025 Hz
0.04 Hz
25 Hz
40 Hz
Diagram shows the internal parts of a
cathode ray oscilloscope. Which part of the oscilloscope shown in Diagram emits electron ?
Rajah menunjukkan bahagian dalam bagi sebuah osiloskop sinar katod. Bahagian manakah pada osiloskop di Rajah yang mengeluarkan elektron?
A
B
C
D
