WorksheetsExam2-CISCO2
Total questions: 25
Worksheet time: 50mins
Which Cisco IOS command is used to configure a static OSPF cost to an interface?
ipv6 ospf process-id cost cost
ospf cost cost
ipv6 ospfv3 cost cost
ipv6 ospf cost cost
If the ipv6 ospf hello-interval 5 Cisco IOS command is entered on an Ethernet interface, what would the OSPFv3 dead interval be set to?
30
40
15
20
Which Cisco IOS command creates and/or configures an EIGRPv6 routing process?
router eigrp asn
ipv6 router eigrpv6 asn
ipv6 router eigrp asn
router eigrpv6 asn
Which Cisco IOS command displays all the interfaces that have been configured for inclusion in EIGRPv6?
show ipv6 protocols
show ipv6 eigrp interfaces
On a Cisco router, in which type of memory is the IOS software stored?
NVRAM
Flash
ROM
RAM
The router ________ feature helps a router notice when a link is no longer functioning.
PortFast
Keepalive
Ping
Pathfast
What is the name of the device that is used with a Digital Subscriber Line (DSL) to split the voice and data signals at the telco?
CMTS
MPLS PE
DSLAM
Modem
Which VPN encryption method has the longest key length?
DES
3DES
Blowfish
AES
Which term is not a synonym for a VPN encryption key?
Unique key
Session key
Shared key
Shared session key
Which congestion management solution was designed specifically for voice and video that has specialized low delay, jitter, and loss requirements?
Priority Specialized Queuing
First-In First-Out Queuing
Low Latency Queuing
Class-Based Weighted Fair Queuing
Which Cisco IOS command can be used on a router to view the different VLANs that have been configured into a ROAS configuration?
show vlans
show vlan configuration
When implementing GLBP, the __________ is responsible for replying to all ARP requests.
AVF
AVG
AFG
When subnetting an IPv6 global unicast address range, how many bits are reserved for the interface ID?
32
16
64
48
Which cloud service model provides access to an application that is built, monitored, and offered by the cloud provider?
TaaS
SaaS
IaaS
PaaS
A router uses EIGRP to learn routes and adds those to the IPv4 routing table. That action is an action that occurs as part of which plane of the switch?
Data plane
Management plane
Control plane
Table plane
When an ASIC needs to perform a lookup on a switch, what is the name of the special type of memory that is used to store the equivalent of the MAC address table?
RAM
Flash
CAM
TCAM
Which two Cisco IOS commands can be used to display the interfaces that have been enabled into the local OSPF process?
show ip ospf interface brief
show ip ospf
show ip ospf enabled
show ip ospf interface
What two pieces of route information are advertised by distance vector routing protocols to neighbors? (Choose two.)
A network topology
A supported interface list
A metric
A next hop device
How to turns off auto summarization in RIP?
no auto-summary
no summary
off auto-summary
shut auto-summary
sh run is used to see:
saving running configuration
seeing running configuration
EIGRP does not sends periodic hello updates?
True
False
Which Cisco IOS command is used to display the current OSPF neighbors and their RIDs?
show ip ospf neighbor
show ospf neighbors
When a pair of OSPF neighbors has reached the (a) state, they can exchange their LSDB with each other.
What is the administrative distance of OSPF routes?
90
110
120
115
OSPF and IS-IS are examples of link state protocol.
True
False
