NEW
Font size
S
M
L
XL
WorksheetsBCE DAY-1-CH+BT-10-05-2020
Total questions: 55
Worksheet time: 41mins
Name
Class
Date
1.
Points to be considerd in building planning
a)
Peoples requirements
b)
Climate and weather
c)
Availability of finance
d)
All the above
2.
This is not a principle of planning
a)
Aspect
b)
furniture requirement
c)
Recreation
d)
Circulation
3.
Identify the principle of planning
a)
Prospect
b)
Grouping
c)
Construction method
d)
Both (a) and (b)
4.
Principle of planning deals with sunlight and wind is
a)
Elegance
b)
sanitation
c)
Aspect
d)
None of these
5.
Cleanliness and hyginic condition is deals with…
a)
Aspect
b)
Sanitation
c)
Flexibility
d)
All the above
6.
Attective building elevation is deals with…
a)
Elegance
b)
Circulation
c)
Flexibility
d)
None of these
7.
Such grouping is not recommeded
a)
Toilet near kitchen
b)
Store near kitchen
c)
Wash near kitchen
d)
All the above
8.
Projected window improves the ______ of building
a)
Prospect
b)
Aspect
c)
Privacy
d)
Both (a) and (b)
9.
Curtain in windows are used to improve
a)
Prospect
b)
Aspect
c)
Privacy
d)
All the above
10.
Max. utilization of room space with min. room dimentions is_____
a)
Elegance
b)
Economy
c)
Roominess
d)
Circulation
11.
Elegance is deals with_______
a)
Good environment
b)
Good elevation
c)
Good economy
d)
All the above
12.
Preferable grouping is _______
a)
Bed room attached with toilet
b)
Kitchen should be away from toilet
c)
Dinning room should be near to kitchen
d)
All the above
13.
Plan, Elevation and Section are types of
a)
Building Planning
b)
Building Construction
c)
Building Drawing
d)
Building Maintanence
14.
Site for residential building should be_____
a)
Near to market and bank
b)
well connected with road
c)
In developed area
d)
All the above
15.
Which is not a building byelaw
a)
FSI
b)
Margin
c)
Orientation
d)
Built up area
16.
FSI is the ratio of
a)
Plot area to builtup area
b)
Carpet area to plot area
c)
Builtup area to plot area
d)
None of these
17.
FSI restrict the _____
a)
Construction activity
b)
Planning activity
c)
Maintanance activity
d)
All the above
18.
Which is not a residential building unit
a)
Varandah
b)
Godown
c)
Bed room
d)
Living room
19.
Setting out of building plan w.r.t. direction of sun,wind and rain is_____
a)
Circulation
b)
Orientation
c)
Construction
d)
Roominess
20.
Building bye laws deals with
a)
Health of people
b)
Comfort of people
c)
Safety of people
d)
All the above
21.
Open space left in front, right and left and back side is known as
a)
Buildtup area
b)
Margin
c)
FSI
d)
None of these
22.
Margin is also known as______
a)
Set back
b)
Set front
c)
Set side
d)
All the above
23.
Line plan is drawn with____
a)
single line
b)
Double line
c)
dotted line
d)
centre line
24.
Layout plan is same as site plan but the large area is covered
a)
true
b)
false
25.
Person can easily reached to the site with the help of
a)
Key plan
b)
Site plan
c)
Layout plan
d)
All the above
26.
In plane surveying,
a)
the curvature of the earth is taken into consideration
b)
the curvature of the earth is not taken into consideration
c)
the surveys extends over large areas
d)
All the above
27.
The curvature of the earth is taken into consideration if the limit of survey is
a)
50 to100 sq.km
b)
150 to200 sq.km
c)
200 to 250 sq.km
d)
more than 250 sq.km
28.
The difference is length between arc and the subtended chord on the surface of the earth for a distance of 18.2 km is only
a)
10 mm
b)
30 mm
c)
50 mm
d)
100 mm
29.
The difference between the sum of the angles of a spherical triangle on the earth's surface and the angles of the corresponding plane triangle for every 195.5 sq.km of area is only
a)
1 sec
b)
5 sec
c)
10 sec
d)
15 sec
30.
In order to determine the natural features such as valleys, rivers, lakes etc, the surveying preferred as
a)
city surveying
b)
location surveying
c)
cadastral surveing
d)
topographical surveying
31.
The surveying used to determine additional details such as boundries of fields, is called
a)
city surveying
b)
location surveying
c)
cadastral surveing
d)
topographical surveying
32.
The working from whole to apart is done in surveying in order to assure that
a)
survey work completed more quickly
b)
no. of errors is minimum
c)
plotting is done more quickly
d)
errors of one portion do not affect the remaining portion
33.
When 1 cm on map represents 10 mm on the ground, the representive fraction of the scale is
a)
1/10
b)
1/100
c)
1/1000
d)
1/10000
34.
The representative fraction 1/2500 means that the scale is
a)
1 cm = 0.25 m
b)
1 cm =2.5 m
c)
1 cm = 25 m
d)
1 cm = 250 m
35.
A plain sacle is used to read
a)
one dimensions
b)
two dimensions
c)
three dimensions
d)
all of above
36.
A diagonal sacle is used to read
a)
one dimensions
b)
two dimensions
c)
three dimensions
d)
all of above
37.
Which of the following statement is correct?
a)
The line ranger is used for fixing intermediate points on the chain lines.
b)
The indirect ranging is resorted to when the ends of a line are not intervisible due to high ground.
c)
The chainman at the forward end of the shain is called leader
d)
all of above
38.
Direct ranging is possible only when the end stations are
a)
close to each other
b)
not more than 100 m apart
c)
mutually intervisible
d)
located at highest points in the sea
39.
The error in measured length due to incorrect holding of chain is
a)
compensating error
b)
cumulative error
c)
instrumental error
d)
negative error
40.
When the length of chain used in measuring distance is longer than the standard length, the error in measured distance will be
a)
positive error
b)
negative error
c)
compensating error
d)
none of these
41.
When the measured length is less than the actual length, the error is known as
a)
positive error
b)
cumulative error
c)
compensating error
d)
negative error
42.
Which of the following statement is correct?
a)
The error in measured length due to bad ranging is compensating error
b)
If the chain used in measuring a distance is too short, the error is positive error
c)
The error in measured length due to careless holding of chain is cumulative error
d)
None of these
43.
The longest of the chain lines used in making a survey is generally regarded as a base line.
a)
Agree
b)
Diagree
44.
A line joining the apex of a triangle to some fixed point on the oppsite side is called
a)
check line
b)
tie line
c)
base line
d)
none of these
45.
A line joining some fixed points on the main survey lines, is called a
a)
check line
b)
tie line
c)
base line
d)
none of these
46.
When the position of a point is to be loacted accurately by a perpendicular offset, the direction of perpendicular is set out by means of
a)
theodolite
b)
optical square
c)
dumpy level
d)
planimeter
47.
When the length of offset is 20m, it is called as
a)
short offset
b)
long offset
48.
The angle of intersection of the horizon glass and index glass in an optical square is
a)
30°
b)
40°
c)
35°
d)
45°
49.
The horizon glass in an optical square is
a)
Wholly silvered
b)
Wholly unsilvered
c)
half silvered and half unsilvered
d)
one-fourth silvered and three fourth unsilvered
50.
The index glass in optical square is
a)
Wholly silvered
b)
Wholly unsilvered
c)
half silvered and half unsilvered
d)
one-fourth silvered and three fourth unsilvered
51.
Objectives of green building are ________.
a)
Use renewable energy
b)
Reduce waste
c)
Provide good indoor air quality
d)
All above
52.
Full form of LEED is __________.
a)
Leadership in Energy and Environmental Design
b)
Leadership in Ecological and Environmental Design
c)
Leadership in Energy and Ecological Design
d)
Leadership in Efficiency and Environmental Design
53.
LEED deals with Sustainable aspects of
a)
Agriculture
b)
Buildings
c)
Chemical industry
d)
Motor vehicles
54.
Sustainability means __________.
a)
Planting trees
b)
Building green
c)
Improving infrastructure
d)
None of above
55.
Full form of GRIHA is _____________.
a)
Global reporting initiative Habitat Assessment
b)
Green Rating for Integrated Habitat Assessment
c)
Green Rating for Integrated Housing Assessment
d)
Global Rating for Integrated Housing Assessment
Reset
