wayground logo

Free Printable Worksheets

NEW

Font size

S
M
L
XL
Worksheets

vehicle fuel, ignition, air and exhaust system units(a)

Total questions: 10

Worksheet time: 30mins

Name
Class
Date
1.

In a multi-point injection system atomised fuel is sprayed very close to which one of the following component

a)

Continuous multi-point injection

b)

Single –point injection

c)

Double point injection

d)

Sequential multi-point injection

2.

In a multi-point injection system atomised fuel is sprayed very close to which one of the following component

a)

Inlet valves

b)

Exhaust valves

c)

Engine cylinder wall

d)

Catalytic converter

3.

When diesel injectors are being replaced what component also needs to be renewed?

a)

Diesel fuel filter

b)

Injector sealing washers

c)

Leak off and return pipes

d)

Electronic control unit

4.

Which one of the following would be different on a single –point injection (spi) and the multi point injection (MPI) fuel system?

a)

Exhaust manifold location

b)

Throttle valve location

c)

Inlet valve position

d)

Fuel type used

5.

Which design cylinder head is shown in the image?

a)

Spark ignition with two inlet valves

b)

Compression ignition with two inlet valves

c)

Spark ignition with three inlet valves

d)

Compression ignition with three inlet valves

6.

What is one advantages of using a coil per spark plug system?

a)

High tension leads are longer

b)

High tension leads are shorter

c)

High tension leads are not required

d)

High tension leads can be made from aluminium

7.

What is the exhaust component shown in the image?

a)

Resonator box

b)

Expansion box

c)

Middle box

d)

Catalytic converter

8.

What is the main function of a secondary air injection system

a)

To further burn excess hydro-carbons and carbon monoxide

(HC+CO) in the exhaust manifold

b)

To burn excess hydro –carbons and carbon monoxide (HC+CO) in the inlet manifold

c)

To further burn excess burn excess oxides of nitrogen and carbon dioxide (NOx+CO2) in the exhaust manifold

d)

To burn excess oxides of nitrogen and carbon dioxide (NOx+CO2) In the inlet manifold

9.

What three harmful gases are converted by the catalytic converter?

a)

CO₂ +H₂O+N₂

b)

HC+CO+H₂O

c)

HC+CO₂+H₂O

d)

N₂+CO₂+NOx

10.

What equipment should be used to carry out a final check after multi-point fuel injectors have been replaced?

a)

Emission tester

b)

Fuel pressure tester

c)

Multimeter

d)

Oscilioscope