Wayground logo

Free Printable Worksheets

Font size

S
M
L
XL
Worksheets

Unit 1 CompTIA

Total questions: 17

Worksheet time: 29mins

Name
Class
Date
1.

Match the features of the storage media.

a)

It has a platter that spins like a disk.

b)

It is a mechanical device with moving parts.

c)

It measure the speed of the drive in revolutions per minute.

d)

it is less prone to damage as it does not have moving parts.

2.

Match the features to the storage media.

a)

It is a mechanical device with moving parts.

b)

It is less prone to damage as it does not have moving parts.

c)

It is a part of high-end devices because it is costly.

d)

The entire component stores data and does not contain

moving parts.

3.

Manufacturers now use it in modern monitors and

replacing fluorescent bulbs.

a)

Light Emitting Diode (LED)

b)

Liquid Crystal Display (LCD)

4.

Amy is designing a cache memory for a processor and uses

____________for this. The team in the next office is designing

a __________ for uses as primary memory.

a)

SRAM, DRAM

b)

ROM, SRAM

c)

SDRAM, DDRAM

5.

Jessica has identified the following cooling system placed on top of her system’s processor. What is it?

a)

CPU FAN

b)

Chipset Fan

c)

Liquid cooling

d)

Heat Sink

6.

Robert’s computer is not starting due to an error in the BIOS. Which of these chips could have malfunctioned?

Select the correct answer.

a)

CPU

b)

RAM

c)

ROM

d)

DIMM

7.

Allie is upgrading the RAM on her laptop. What memory module form factor will be compatible with the laptop?

Type the correct answer in the box.

a)

DDR SDRAM

b)

RAM

c)

SODIMM

d)

DDR ROM

8.

With which type of socket will the following CPU be compatible?

a)

Pin Grid Array

b)

Ball Grid Array

c)

Land grid array

d)

Zero insertion Force

9.

Printer interfaces may be wired or wireless. Example of wired interfaces include ___________ interface, and wireless printer interface includes_________

.

a)

Bluetooth, Serial Interface

b)

Cloud, Bluetooth

c)

Parallel Interface, Serial Interface

d)

Ethernet, Cloud

10.

____________ clones data simultaneously on two separate disks. It is also known as disk mirroring. However,_________

requires a minimum of four disks.

a)

RAID 0, RAID 5

b)

RAID 5, RAID 10

c)

RAID 1, Raid 10

d)

RAID 0, RAID 10

11.

What are the essential features of a tape drive?

a)

They can hold a lot of information, ranging from 100 GB to multiple terabytes.

b)

They can store information for a long period of time.

c)

They have only moving parts.

d)

They store information in a sequential order.

e)

They are very expensive.

12.

Jason found his father’s old phone. When he looked into the interior circuit of the phone, he found that the storage card was permanently fixed on the primary circuit board of the phone. What type of storage media is this?

a)

XD-picture card

b)

secure digital (SD)

c)

compact flash (CF)

d)

Embedded Multi Media Card (eMMC)

13.

Sequence the steps for completing the imaging process of a laser printer.

a)

processing, charging, exposing, developing, transferring, fusing, cleaning

b)

developing, transferring, fusing, cleaning, processing, charging, exposing

c)

charging, exposing, developing, transferring, fusing, cleaning, processing,

d)

processing, charging, exposing, developing, transferring, fusing, cleaning

14.

To get into the BIOS setup utility, press__________________,

and to apply the changes it is necessary to ______________.

a)

press “Save” and restart, press F2

b)

F10, press “Exit”

c)

press “Save” , any function key

d)

the key specified by the manufacturer, press “Save” and restart

15.

Which of the following statements are true about CMOS and BIOS?

a)

CMOS and BIOS are the same parts of a motherboard.

b)

CMOS and BIOS are two different parts of a motherboard.

c)

BIOS and CMOS are powered by CMOS battery.

d)

Both CMOS and BIOS store data.

e)

Changes made in the BIOS are stored in CMOS.

16.

Rachel needed to upgrade her client’s CPU with a better one. When she tried to install the new hardware, the computer didn’t recognize it. Which of the following could be the reason?

a)

The system is outdated.

b)

The BIOS of the system is not upgraded.

c)

The CMOS battery is dying.

d)

The system doesn’t have enough memory.

17.

Brad wants to assemble a compact, low-cost computer that can be used in his car. Which motherboard should he choose?

a)

AT

b)

ATX

c)

ITX

d)

Micro-ATX