The pressure-atomizing unit that receives fuel under high pressure from the fuel manifold and delivers it to the combustor in a highly atomized, and precisely patterned spray.

Is a component or area of a gas turbine, engine where combustion takes place

A disclosed for coupling to an exhaust system

A bolt passing through all the thicknesses or layers which it binds or in which it is fixed and made fast by a nut at the end opposite the head.

A thin and often tapered or wedged piece of material, used to fill small gaps or spaces between objects.

Sensor that is Inductive or magnetic that measure wheel speeds without contact.

A turbomachine with at least one moving part called a rotor assembly, which is a shaft or drum with blades attached.

Is a mechanical component for transmitting torque and rotation,

An enclosed space in which combustion takes place, especially in an engine or furnace.

Is an exhaust system to enhance its power output by improving its volumetric efficiency.

Are made from materials that can withstand the high temperatures of combustion.

Outer shell of the combustor, and is a fairly simple structure.

Parts of combustor chamber that slow the high speed, highly compressed, air from the compressor to a velocity optimal for the combustor.

The combustion process and introduces the various airflows into the combustion zone.

An extension of the dome that acts as an air splitter, separating the primary air from the secondary air flows

Part of the combustor that the primary air flows through as it enters the combustion zone.

Part of combustion chamber that is responsible for mixing the fuel and air.

The pressure-atomizing unit that receives fuel under high pressure from the fuel manifold and delivers it to the combustor in a highly atomized, and precisely patterned spray.

Is a tuned exhaust system used to enhance its power output by improving its volumetric efficiency

is a device, typically, a thermocouple, that provides for temperature measurement through an electrical signal

Enclosed space in which combustion takes place, especially in an engine or furnace.

Type of washer that prevent fastening or loosening by preventing unscrewing rotation of the fastening device; locking washers are usually also spring washers.

is a type of fastener with a threaded hole

A small part on or attached to a piece of furniture or equipment.

Is a filter in the fuel line that screens out dirt and rust particles from the fuel,

Is responsible for compressing the fuel supplied by the electric fuel pump

A filter device or process that removes some unwanted components or features from a signal.

Is a designed zone of filter material (usually well-graded, clean sand) con- structed around a conduit.

A porous device for removing impurities or solid particles from a liquid or gas passed through it.

Filter that is contained in a pressure vessel (such as a steel tank) and that they are operated under pressure

Is the central component of industrial filters.

An automatic device for starting a machine,

An engine part in which another part (such as a journal or pin) turns or slides

Are closed, maintenance-free hydraulic elements which are used for the smooth slowing of feed units, linear drive units, flaps, etc.

Part or component that that retains (holds) something in its place.

A mechanical component that engages with another component to prevent movement in one direction, or prevent movement altogether.

Part attached to an internal combustion engine that is part of the assembly which transfers the torque from the starter motor to the engine's crankshaft, in order to start the engine.

Is a mechanical component for transmitting torque and rotation

A wrench with one open end and one socket end.

Screwdriver with a flat wedge-shaped tip that fits into a slot in the head of a screw

A kind of hammer, often made of rubber or sometimes wood, that is smaller than a maul or beetle, and usually has a relatively large head.

A tool consisting of a bar or wheel with a set of angled teeth in which a pawl, cog, or tooth engages, allowing motion in one direction only.

Is a fitted bar that allows you to extend the reach of a socket when using a ratchet wrench

Is a simple tool used to drive bolts and screws with hexagonal sockets in their heads.

Is any intermediate component for fixing one part to another