Font size
Worksheetstransistor
Total questions: 52
Worksheet time: 13hrs 0mins
What are the 3 legs of a transistor called?
Base, Electrode, Commiter
Bridge, Collector, Extruder
Base, Collector, Emitter
Brake, Collection, Emit
A transistor is essentially what?
An output device
An electronic switch
A deivce that limits the flow of power
Transistors act like tiny "____________."
Electron sources
Switches
Batteries
Bees?
transistor has 3 electrodes namely
PNP
NPN
Base/ Collector/ Emitter
Drain/ Gate/ Source
In a Transistor ………………..
IE = IC + IB
IC = IE + IB
IE = IC – IB
IB = IC + IE
In which circuit does the bulb light up?
What are the names of the terminals X, Y and Z?
X = Base, Y = Collector, Z = Emitter
X = Emitter, Y = Base, Z = Collector
X = Collector, Y = Base, Z = Emitter
X = Collector, Y = Emitter, Z = Base
Diagram shows a light controlled switch. The alarm will be activated when
the surrounding is dark
the surrounding is bright
the temperature of the surrounding is high
the temperature of the surrounding is low
One function of the transistor is to_____________?
rectify
amplify
limit
control
How many terminals are there in a transistor....?
1
2
3
4
Diagram shows an automatic switch circuit to light up a bulb during the day time. What changes should be done to light up the bulb at night?
Rajah menunjukkan litar suis automatik untuk menyalakan lampu semasa hari siang. Apakah perubahan yang perlu dilakukan untuk menyala mentol pada waktu malam?
Interchange R1 and R3
Tukar R1 dan R3
Reverse the terminal of the battery
Terbalikkan terminal bateri
Replace the npn transistor with a pnp transistor
Gantikan transistor npn dengan transistor pnp
Interchange R1 and the LDR
Terbalikkan R1 dan LDR
The street lights use electronic control system that switches the lights on when the surrounding is dark. What is the input sensor of the control system?
Lampu jalan menggunakan sistem kawalan elektronik yang menghidupkan lampu ketika sekitarnya gelap. Apakah sensor input sistem kawalan?
Thermistor
Termistor
Light emitting diode
Diod pemancar cahaya
Microphone
Mikrofon
Light dependent resistor
Perintang peka cahaya
Diagram shows a transistor circuit with a thermistor and a light bulb.
What happens to the resistance of the thermistor and the light bulb when the temperature of the surrounding is at room temperature?
Rajah menunjukkan suatu litar transistor dengan sebuah termistor dan mentol.
Apakah yang berlaku kepada rintangan termistor dan mentol itu apabila suhu sekeliling adalah pada suhu bilik?
Resistance of thermistor low and lights up
Rintangan termistor rendah dan menyala
Resistance of thermistor low and lights up
Rintangan termistor rendah dan tidak menyala
Resistance of thermistor low and lights up
Rintangan termistor tinggi dan menyala
Resistance of thermistor low and lights up
Rintangan termistor tinggi dan tidak menyala
Diagram shows an automatic circuit using transistor. The resistance of thermistor decrease as the surronding temperature rises. The bell will ring when the potential difference across the resistor R is 4V. What is resistance of the thermistor?
Rintangan termistor berkurang jika suhu persekitaran bertambah. Loceng akan berbunyi apabila beza keupayaan merentasi R adalah 4V. Berapakah nilai rintangan resistor?
4 kΩ
5 kΩ
10 kΩ
16 kΩ
In a NPN Transistor, the current carriers are ………….
Acceptor Ions
Donor Ions
Free Electrons
Holes
What are resistors measured in?
Volts
Amps
Ohms
Current
This is the circuit symbol for which input component?
Thermistor
LED
LDR
Which component is used to detect a change in temperature?
Thermistor
LDR
Transistor
Switch
A buzzer is an example of what device?
Input
Process
Output
PNP transistor based is ___________________?
Negative
positve
gronud
offset
transistor has 3 electrodes namely
PNP
NPN
Base/ Collector/ Emitter
Drain/ Gate/ Source
In an NPN transistor the P is the
Collector
Base
Emitter
None of the above
In a transistor, the arrow always points in the direction of
conventional current flows
electrons flows
voltage flows
A transistor consists of how many diodes?
1
2
3
4
The shorter leg of an LED is what?
Positive
Negative
Diagram shows an automatic switch circuit to light up a bulb during the day time. What changes should be done to light up the bulb at night?
Interchange R1 and R3
Reverse the terminal of the battery
Replace the npn transistor with a pnp transistor
Interchange R1 and the LDR
The street lights use electronic control system that switches the lights on when the surrounding is dark. What is the input sensor of the control system?
A thermistor
A light emitting diode
A microphone
A light dependent resistor
What are the names of the legs on a Bipolar Junction Transistors? (3 Correct)
Base
Collector
Emitter
Anode
Gate
The number of depletion layers in a transistor is --------
(a)
Diagram shows a light controlled switch. The alarm will be activated when
Rajah menunjukkan suis automatik cahaya. Penggera akan aktif apabila
the surrounding is dark
sekeliling gelap
the surrounding is bright
sekeliling cerah
the temperature of the surrounding is high
suhu sekeliling tinggi
the temperature of the surrounding is low
suhu sekeliling rendah
The street lights use electronic control system that switches the lights on when the surrounding is dark. What is the input sensor of the control system?
Lampu jalan menggunakan sistem kawalan elektronik yang menghidupkan lampu ketika sekitarnya gelap. Apakah sensor input sistem kawalan?
Thermistor
Termistor
Light emitting diode
Diod pemancar cahaya
Microphone
Mikrofon
Light dependent resistor
Perintang peka cahaya
Diagram shows the electric circuit which switches on the bulb automatically during the day. The circuit needs to be modified so that it will function as a fire alarm. Which of the following are the symbols for the components which need to be connected at P and Q?
Rajah menunjukkan litar elektrik yang akan menghidupkan mentol secara automatik ketika waktu siang. Litar tersebut perlu diubahsuai supaya boleh berfungsi sebagai penggera kebakaran. Simbol komponen yang manakah perlu disambungkan pada P dan Q
A
B
C
D
Diagram shows a circuit consists of a transistor used to light up LED during dark. Unfortunately, the circuit does not work. Which of the following would most likely rectify the fault in the circuit?
Rajah menunjukkan sebuah litar yang mengandungi sebuah transistor digunakan untuk menyalakan LED ketika waktu malam. Tetapi, litar tersebut tidak berfungsi. Manakah antara berikut yang kemungkinan besar akan memperbaiki kerosakan dalam litar?
Reconnect the dry cells with its terminals reversed
sambung semula sel kering dengan terminal terbalik
Reconnect the LED with its terminal reversed
sambung semula LED dengan terminal terbalik
Interchange the positions of the LDR and the resistor R2
menukarkan kedudukan PPC dan perintang R2
Replaced the LDR with a thermistor
menukar PPC dengan termistor
“Resistance changes with the intensity of light.” According to the statement, which electrical component is it referring to?
“Nilai rintangannya berubah dengan keamatan cahaya.” Menurut pernyataan berikut, komponen elektrik yang manakah sedang dirujukkan?
Capacitor
Kapasitor
Thermistor
Termistor
Light dependent transistor
Transistor peka cahaya
Light dependent resistor
Perintang peka cahaya
A
B
C
D
A
B
C
D
A
B
C
D
A
B
C
D
A
B
C
D
A
B
C
D
A
B
C
D
A
B
C
D
A
B
C
D
A
B
C
D
A
B
C
D
A
B
C
D
Which component is used to detect a change in light?
Thermistor
LDR
Transistor
Switch
What is this?
Vacuum Tube
Transistor
Circuit
What type of transistor does this symbol represent?
ppn transistor
nnp transistor
npn transistor
pnp transistor
In the diagram given which terminal is the emitter?
x
y
z
How many PN junctions are there in a transistor?
1
2
3
4
