Always maintain a _______ inch margin of safety around the blade.

TPI on blades stands for ______________.

You don't need to wear safety glasses when operating the band saw.

It is ok to leave the band saw plugged in to an electrical outlet, but with the power switch off while changing a blade.

Before turning on the band saw, make sure all guards and guides are in place. This includes: upper blade guard, bearing guides, saw dust chute, and wheel covers.

The band saw upper blade guard should be between _____ to ____ above the stock (material) you are cutting.

Allow the band saw to operate at full speed. If it slows down, then you are feeding the stock too ________ .

When sawing tight curves, always make ____________.

When sawing tight curves, always make relief cuts

Never use your ________ to remove cut-offs while the saw is operating.

Do not back out of any curved saw cut while the machine is operating. Turn off the machine, let the blade stop completely and then back out.

If a clicking sound develops while you are sawing, the machine is telling you that the blade is about to __________.

If the you have a accident while using a band saw, you should:

If you see someone have an accident while operating the band saw, you should

You should always Turn off the band saw and lower the upper blade guard after use.

A band saw had how many wheels?

A band saw has a tension nob to secure the blade on the wheel.

How many bearing guides are used to ensure the blade on a band saw does move back and side to side?

The first step in safety is to educate yourself.