In this method, tubes, conduits, or channels are inserted in the concrete where reinforcing steel is required.

It is a modern building method that is based in the combination of steel cross sections and reinforced concrete elements and is aimed at the maximum possible utilization of their properties to the benefit of the structure.

Consists of panels and components that are pre-fabricated in a factory, and transported to the construction site ready to be assembled.

What type of lateral system are shown in the illustration?

This type of lateral load-resisting system engages a vertical element of the building, usually concrete or masonry, to transfer the horizontal forces to the ground by a primary shear behavior.

Widely used in the pre-engineered metal building (PEMB) industry mainly as roof and floor support systems. Their capacity to sustain loads with long span and lightweight configurations gives this system a great advantage over conventional wide flange steel beams and girders in the industry.

Serves as a permanent formwork for a reinforced concrete slab until the slab can support itself and its live load.

is manufactured by welding a corrugated sheet to a flat steel sheet, forming a series of spaces or raceways for electrical and communications wiring; special cutouts are available for floor outlets. The decking may serve as an acoustic ceiling when the perforated cells are filled with glass fiber.

Serves as a tensile reinforcement for the concrete slab to which it is bonded with embossed rib pattern.

is defined a pin-joined system with a particular configuration of cables

and struts that form a statically indeterminate structure in a stable equilibrium. Infinitesimal mechanism should exist in a tensegrity with equivalent self-stress state.