Font size
WorksheetsDesign Documentation
Total questions: 36
Worksheet time: 19mins
Once a design has been approved and fully researched, the part needs to be _____________ or ______________.
Modeled
Prototyped
Created
Purchased
Manufactured
These are a complete set of drawings, that document how an object will be manufactured and assembled.
Detailed Part Assemblies
Manufacturing Assembly Drawings
Working Drawings
Exploded Pictorial Assembly Drawings
Each set of working drawings should document which of the following?
Part Drawings
Pictorial Design Drawings
Parts List
Specifications/Instructions
Assembly Drawings
This drawing type consists of dimensioned orthographic views. If necessary, section, auxiliary and detail views with dimensions could be used to provide all the information needed for making the object. Even an isometric view could be used to help the manufacturer.
Multi-View Drawing
Assembly Drawing
Part Drawing
Alternate View Drawing
What does the image represent?
Part Characteristics
Parts List
Title Block
Manufacturer's Information
This is important when reading a drawing to ensure that the drawing is printed to display the proper scale accurately. It is also valuable when printing so you know the dimensions of paper needed.
Scale
Sheet Size
Sheet Number
Drawing Number
In a title block, this documents how many times the drawing has been changed.
MFG
QA
DWG NO
REV
This section of a title block provides the name of the person responsible for the creation of the drawing.
Drawn
Drawn by
Author
Created by
This image is describing the:
6 Degrees of Freedom
Cartesian Coordinate System
Orthographic projection
Isometric image
What type of tolerance is circled on this drawing?
Limit dimensions, because there are two numbers shown
Unilateral tolerance, because the dimension can only be larger or smaller than 2.00, but not both
Bilateral tolerance, because the dimension can be both larger and smaller than 2.00
General tolerance, because the amount of variance must be looked up on a table
What type of section view is shown here, and how do you know?
A full section, because the cutting plane line passes fully through the part.
A quarter section, because 1/4 of the part is removed.
An offset section, because the cutting plane line is not straight.
A half section, because the cutting plane line passes halfway through the part.
For the circled dimension (2.6), what is the tolerance (difference between upper and lower limits)?
0.040
0.020
2.62
0.010
What is the lower limit of the tolerance circled in this drawing?
.000
.500
.503
.003
What is the upper limit of the tolerance circled on this drawing?
.030
.880
.850
Unable to determine because the table for general tolerances is not provided
Which tolerance amount (from the table) should be used for the circled value?
+ .020
+ .010
+ .005
No tolerance required since the dimension is written as a single number without a "+" or "-"
What is displayed in green on this sketch?
dimensional constraints
grips
snap restrictions
geometric constraints
A constraint that causes selected geometric entities to become mirror images constrained about a selected line or axis.
Symmetry
Concentric
Equal
Parallel
Perpendicular
Coincident
Coincident
Collinear
Equal
Parallel
Horizontal
Symmetry
Horizontal
Symmetry
Dimensional constraints are used to measure:
with and death
width and depth
location and size
none of the above
Geometrical constraints are used to show dimension relations to the geometry.
True
False
A driven dimension is showing that to many dimension are being used and is greyed out.
True
False
Global variables can use both dimensional and mathematical relations.
True
False
How many parametric modeling dimensions and constraint icons are found in the
sketch?
2
16
18
9
Which of the following does NOT affect a model’s design intent?
Hiding a sketch or feature in the graphics area
Choosing a dimension strategy
Reordering features
Choosing one feature type over another
