WorksheetsAutobody terms "the H's"
Total questions: 29
Worksheet time: 29mins
A tool sometimes used to cut metal parts
(a)
A rotating shaft assembly using two CV-joints to transmit power from a differential to a wheel that is sprung independently of the differential. Commonly used in front-wheel-drive vehicles and some rear-wheel-drive vehicles
(a)
An unwanted shiny ring or halo that appears around a pearl or mica paint repair. It is caused by the paint being wetter in the meddle and drier near the outer edges of the repair.
(a)
A method used to straighten metal just before the final stage of straighten metal just before the final stage of straightening.
(a)
A small, portable tool for blasting parts and panels on the vehicle
(a)
Compound designed to be applied by hand on a rag or cloth
(a)
Used for final smoothing and shining of the paint
(a)
General tools such as wrenches, screwdrivers, pliers and other common tools
(a)
Compares the test panel to the vehicle straight on, or perpendicular
(a)
Equipment used to adjust the direction of the vehicle headlights
(a)
A body design that has a large third door at the back. This design is commonly found on small compact cars, allowing for more rear storage space.
(a)
The sleeve that accepts the headrest post and mounts in seat back
(a)
A metal area that has been heated beyond its critical temperature, causing it to lose strength
(a)
Used to determine the temperature of the aluminum or other metal being heated. They will melt at a specific temperature and warn you to prevent over-heating.
(a)
Determines the length of the arc when MIG welding. Also called voltage.
(a)
A piece of metal that protects wiring, or other sensitive parts, by absorbing excessive heat. Clamp-on heat sinks are often used during repair operations such as soldering
(a)
A paste that can be applied to parts during welding to absorb heat and prevent warpage
(a)
Also referred to as a thread insert, it can be used to repair badly damaged internal threads
(a)
The chemical symbol for mercury. The height of a column of mercury, expressed in inches, is a measure of pressure or vacuum. One inch Hg equals 0.491 psi
(a)
Also called a bump, it is an area that sticks up higher than the surrounding surface.
(a)
Parts that swing up and open such as doors hoods, and decklids
(a)
A device that stretches and holds the seat cover over the seat frame and padding
(a)
The hinged panel for accessing the engine compartment( front-engine vehicle) or trunk area (rear engine vehicle)
(a)
Part of the cable hood release, it has metal arms that grasp and hold the hood striker
(a)
Part of the cable hood release, it can be pulled to slide a cable running to the hood latch
(a)
An instrument used to measure the specific gravity of a liquid, such as battery acid or radiator coolant
(a)
Equipment operated by oil under pressure
(a)
A clamp used to hold radiator hoses, heater hoses and other hoses onto their fittings
(a)
An instrument used to measure the specific gravity of a liquid, such as batter acid or radiator coolant
(a)
