Font size
WorksheetsMechanical Drafting (Quiz 1)
Total questions: 40
Worksheet time: 23mins
A drafting tool used for drawing horizontal lines.
Triangular Scales
T-square
Triangle
Compass
Drafting material used for fastening the drawing paper on the drawing table.
Compass
Divider
Masking tape
Triangle
The main function of this tool is to reproduce the measurements of an object to any size.
Compass
Protractor
Triangle
Triangular Scales
This drafting tool is used when drawing vertical lines.
Compass
Triangle
Triangle
Ruler
Best tool when measuring arcs, angles and circle.
Divider
Protractor
Compass
Compass
Type of pencil used for general purpose of drawing.
Medium pencil
Hard pencil
Soft pencil
All of the above
These are used for the purpose of measuring dimensions.
Cutting tools
Measuring tools
Lining tools
Testing tools
It is a concave, spring-steel blade ranging 1/4 to 1 wide and 6 about 300 feet in length.
Tape ruler
Meter stick
Triangle
Ruler
The system graphically representing an object by line drawing on the flat surface is called _________.
Multi-View drawing
Orthographic projection
Pictorial drawing
Isometric drawing
The common views used in multi-view drawing are _____________________________.
Front, back, side
Front, side , rear
Top, rear, right, bottom, front, left
Front, top, rear
Phantom line
Center line
Section line
Visible line
Visible line
Cutting plane line
Long break line
Section line
Leader line
Cutting plane line
Dimension line
Extension line
Visible line
Hidden line
Extension line
Section line
Hidden line
Visible line
Section line
Dimension line
This is a drawing with the use of pencil, paper and eraser only.
Orthographic drawing
Isometric drawing
Mechanical drawing
Freehand sketching
◦It shows object as it would appear in photograph.
Isometric Drawing
Pictorial Sketching
Mechanical Picture
Pictorial drawing
The object is represented by three sides seen at one time. It is made with a 30 x 60 degree triangle.
Isometric Drawing
Freehand Sketching
Mechanical Drawing
Orthographic Drawing
The object is represented by three sides seen at one time. It is made with a 30 x 60 degree triangle.
Isometric Drawing
Orthographic Drawing
Mechanical Drawing
Pictorial Drawing
◦Used to show the material dimension (Width, Height, Depth) and shapes of the product (do not necessarily need to be drawn perfectly, the main important is the measurement.
Mechanical Drawing
Isometric Drawing
Technical Drawing
Orthographic Drawing
It is describing of shapes of objects completely and exactly with the use of drawing instruments and by the use of orthographic projection.
Freehand Sketching
Isometric Drawing
Mechanical Drawing
Technical Drawing
Uppermost line for upper case letters also known as ascender.
Drop line
Waist line
Base line
Cap line
A line for letters with strokes that extend downward also known as descender.
Cap line
Base line
Waist line
Drop line
Line where all letters rest or stand.
Drop line
Cap line
Base line
Waist line
A line between cap and base line, used to determine the height of lower case letters.
Cap line
Base line
Waist line
Drop line
Which of the following is not included into the group?
Cup line
Base line
Drop line
Waist line
Which of the following is not included into the group?
Orthographic
Pictorial
Isometric
Trimetric
Arrange the jumbled letters to find out the correct answer.
EINCLP HSRAEEPNR
(a)
Arrange the jumbled letters to find out the correct answer.
GENRAIS DSLHEI
(a)
Arrange the jumbled letters to find out the correct answer.
DVIIRED
(a)
An oblique drawing in which the depth axis lines are in full scale or in full size.
Cabinet
Cavalier
General Oblique
All of the above
Depth axislines are drawn on one-half scale
Cavalier
Cabinet
General Oblique
All of the above
depth axis lines vary from one half to full size.
General Oblique
Cavalier
Cabinet
All of the above
It is considered as the darkest lines that surround a drawing usually in rectangular shape.
Boarder line
Long break line
Center line
Leader line
Light and broken lines used in circles, sometimes as extension line.
Leader line
Dimension line
Invisible line
Center line
Arrange the jumbled letters to find out the correct answer.
DGRNAIW PPAER
(a)
A line used to show the limits of dimension.
Extension line
Object line
Dimension line
Center line
Visible line
Extension line
Hidden line
Long break line
Long break line
Short break line
Hidden line
Extension line
Visible line
Extension line
Phantom line
Cutting plane line
