Free Printable Portable Power Tools Quiz

Worksheets

Portable Power Tools Quiz

Total questions: 20

Worksheet time: 20mins

Name

Class

Date

An inspection of a portable power tool is required when?

once a day

once a week

before use

once a month

The workpiece should be __________ as you work on it with portable power tools.

placed on a table

Cleaned

Clamped

held by another student

Before replacing parts such as bits, blades, or discs on any tool, you must _____.

a. polish it with a fine steel wool

b. recharge the tool's battery

c. disconnect the power source

d. inspect them for cracks

Never use a circular saw that does not have an lower blade guard because the _____.

a. trigger lock will not work properly

b. saw will not cut cleanly

c. guard protects you from touching the blade

d. saw kerf will be too wide

Do not operate saw if ________ does not move freely and close instantly.

a. Trigger switch

b. Retractable Lower Blade Guard

c. Lever for Retractable Lower Blade Guard

d. Base Plate/ Shoe

Before you plug any saw into a power source, make sure the _____.

a. speed is set to Low

b. power switch is in the Off position

c. work has been clamped down

d. lower blade guard is pulled back

What safety equipment are you required to wear when operating power tools?

Eye protection

Ear protection

Closed toed shoes

All of the above

What should you do with jewelry and loose clothing before working with power tools?

Push them back and out of the way

Take them completely off

Just be careful as you work

Put the jewelry into the loose clothing

How do you clean up work area after using power tools?

Sweep up saw dust

Throw away scrap pieces

Put away tools in their proper location

All of the above

10.

How do you change bits in a drill?

Change the drill direction to "forward" and turn on power

Pull out the bit and put a new one in

Loosen the chuck, place a new bit, and tighten

Drills can't change bits

11.

Before drilling, what should you do with the tip of the screw?

Push the screw into the wood to make it stand

Hammer the screw to make it stand

Twist in the tip of the screw with your finger

Just start drilling in the screw

12.

What is the function of the "lower blade guard" on the circular saw?

It is a wall to push wood against to cut a straight line

It is the blade of a saw blade which is used to cut the material

It is the piece that you plug in to a power source

It is used to protect the blade

13.

How fast should the blade be moving before cutting the wood?

Cut the wood as soon as you turn on the tool

Turn on the tool, wait 30 seconds, then cut

Wait until full speed, and then cut

Roughly 45 miles per hour

14.

Identify the name of the part of the circular saw that is labelled as '1'

Lower blade guard

Handle

Electric Cord

Trigger Switch

15.

Identify the name of the part of the circular saw that is labelled as '2'

Lower blade guard

Handle

Electric Cord

Trigger Switch

16.

Identify the name of the part of the circular saw that is labelled as '9'

Lower blade guard

Handle

Electric Cord

Trigger Switch

17.

Identify the name of the part of the circular saw that is labelled as '10'

Lower blade guard

Lever for lower blade guard

Electric Cord

Trigger Switch

18.

Identify the name of the part of the circular saw that is labelled as '11'

Lower blade guard

Lever for lower blade guard

Electric Cord

Trigger Switch

19.

Identify the name of the part of the electric drill that is labelled as 'A'

Battery Pack

Variable Speed Switch

Chuck

Torque Adjustment Collar

20.

Identify the name of the part of the electric drill that is labelled as 'B'

Forward/ Reverse Button

Variable Speed Switch

Chuck

Torque Adjustment Collar

Reset

Portable Power Tools Quiz

Total questions: 20

Worksheet time: 20mins

Similar Resources on Wayground