WorksheetsGIHS Mechanical Engineering Technology EOT Gr.11
Total questions: 60
Worksheet time: 31mins
Which picture represent eye safety?
Which picture represents clothing protection?
Which picture below represents "Toxic?"
What does this picture represent?
Chemical Warning
Irritant
Clothing Protection
Sharp Object
Which picture represent open flame warning?
What does this picture represent?
Fire Hazard
Always plug in devices
Electricity Hazard
Look for a socket
Who invented the Bessemer process?
Isaac Newton
Alexander Graham Bell
Henry Ford
Henry Bessemer
The Bessemer process, allowed the________ of steel, increasing the scale and speed of production of this vital materia
mass-production
production
creation
invention
Steel is...
an alloy
ore
Steel is ... than iron
stronger
weaker
Wrought iron has ... iron
a lot of
little
Steel which doesn't rust is called...
stainless steel
rust-free steel
What is this?
A Bessemer converter
a blast furnace
Which of these is a mass production process?
Cutting with a hack saw
Sand casting
Injection moulding
Pop-riveting
Which machine component on the horizontal milling machine holds the cutting tool?
spindle
arbor
tool holder prime
quill
Which vertical milling machine component contains the spindle?
head
arbor
shoulder
spindle prime
What is the most common workholding device used on the mill?
C clamp
vise
lockjaw
all of the above
Which type of milling operation on a horizontal mill produces a flat top surface?
flat mill
collet crew
slab milling
mill milling
What object is a split-sleeve device that expands of contracts to grip the cutting tool?
bit
mandible
collet
end mill
Which variable do the forward-reverse switch and hi-neutral-lo lever control?
spindle position
spindle depth
vise rpm
the spindle's rotation
Name the machine shown here.
Milling machine
Centre lathe
Bench grinder
Laser cutter
Name the machine shown here.
Laser cutter
Pillar drill
Centre lathe
Bench grinder.
Name the machine shown here.
Bench grinder
Milling machine
Laser cutter
Centre Lathe
Name the machine shown here.
Miller
Pillar Drill
Milling machine
Laser cutter
Name this machine.
Turner
Bench grinder
Centre lathe
Wood turning lathe
Select the control from those below to move a milling machine work table quickly into position in relation to the cutter.
Feed-shaft lever
Rapid transverse lever
Cross-slide
Cross-feed lever
In the statement below about why mill slide-ways must be correctly adjusted, fill in the gap (G) with one of the options below. You will use each of the options once over the following 3 questions.
If the gib is too loose, some ________ movement of the table can take place, causing ___(G)_____ while the work-piece is machined. The work might also be __________.
Chattering
inaccurate
sideways
True or False. The 'knee' on the mill slides vertcally up and down the column, to raise and lower the table.
True
False
Select the best statement for the use of an end mill.
Edges, profiling and drilling
Slotting, profiling, edges, and facing narrow edges
Drilling, profiling and knurling
Drilling, knurling, parting off and slotting
What is this?
Face cutter
Parting tool
Parting insert
End mill
What is this?
Face cutter
Parting tool
Parting insert
End mill
What is this?
Face cutter
Parting tool
Parting insert
End mill
This allows power or energy to transfer between gears
Output
Input
Torque
Mesh
Teeth
These are ridges along the outside of gears
Output
Input
Torque
Mesh
Teeth
What does this gear set up produce?
Torque
Speed
name the tool
thin tool
right hand knife tool
parting off tool
chamfer tool
what type of chuck is this
round chuck
3 jaw chuck
stepped chuck
face chuck
name the tool
pointy centre
dead centre
live centre
flat centre
What headstock component is this describing? In the lathe headstock, it lets you alter the spindle speed to suit the size of the work-piece, as well as the cutting tool's capabilities and the type of turning operation required.
Headstock spindle
Headstock spindle gearbox.
Identify part 1.
Compound slide
Cross slide
Cross slide hand wheel
Saddle
Tool post
Identify part 2.
Compound slide
Cross slide
Cross slide hand wheel
Saddle
Tool post
Identify lathe Angle 1.
Front clearance angle
Front top rake angle
Lip or tool angle
Side clearance angle
Side top rake angle
Identify lathe Angle 3.
Front clearance angle
Front top rake angle
Lip or tool angle
Side clearance angle
Side top rake angle
Which of the following affect the cutting speed (How fast material goes through the lathe tool)? Pick one
Type of material
Material the lathe tool is made of.
Power that drives the machine
Condition of the machine
All of the above
What should be keep clear before using a metal lathe?
Jewelry
Loose Clothing
Long Hair
Hoodie Strings
Shoes
What should be in place before using a machine?
Guards
Quick Change
Locks
Axle Hyperbole
What safety Equipment should be used when operating the metal lathe?
Safety Glasses
Shop Apron
Combat boots
Welding mask
What should you remove before starting the machine?
Chuck Key
Workpiece
Tools
Tail stock
When you stop the machine, what should you do?
Wait for the machine to coast to a stop
stop the machine with your hand and leave
walk away after turning off the machine
Leave the machine running
What is the name of this tool?
Centre punch
Divider
Scriber
Odd leg calliper
What is this tool used for?
Marking lines square to an edge
Marking lines parallel to an edge
