Company standards determine how often __________ is performed.

Image magnification is used in what type of device?

__________ measures the difference between an object's dimension and an object of known length.

A __________ is a measurement tool that measures part dimensions by indicating the amount of distance its probe moves when placed against the part.

Metals that contain iron, such as steel are called __________ metals.

The best method for checking the height of two or more parts is to use a dial indicator and stand, gauge blocks and a __________.

The dial indicator makes measurements using the __________ method.

The different grades of __________ each have different tolerances.

To eliminate indicator measurement error a device called a __________ is used as the reference part.

A measurement made with a precision measurement tool can be as precise as __________.

What is 1 /1000 inches in decimal?

A typical dial caliper can be used to measure dimensions to the nearest __________ inches.

Calibration means to __________.

The two outside jaws of a __________ are only used to measure the outside dimensions of parts.

The typical accuracy of a modern dial caliper is about __________.

One advantage of a __________ is that measurements can be read more quickly than with other precision measuring devices.

SPC data can be collected and transferred to a PC from what device?

The digital caliper's __________ houses the digital display.

The accuracy of a digital caliper reading is about __________ inches.

Dimensional measurement determines physical dimensions such as __________.

Flatness is an important geometric feature of what measurement component?

Two systems of dimensional measurement used in manufacturing are the SI Metric System and the __________.

A __________ has its graduations engraved so that they can not be rubbed off.

The first step in dimensional measuring is to align the end of the rule where the zero is located with one edge of the dimension you want to measure. This edge is called the __________.

The measurement of a 5.000 inch part, with an instrument having __________ accuracy, should range from 4.998 - 5.002 inches.

Resolution is sometimes called __________.

A common decimal inch rule graduation is in __________.

A common fractional inch rule graduation is in __________.

A scale typically found on a machinist rule is __________.

A __________ is a plot of the data samples over time (a time-series plot).

Control charts are often used to show __________ trends.

Control charts provide __________ to allow manufacturers to analyze problems on a piece of equipment.

Large variation changes are shown visually on a __________

Manufacturers commonly use a control chart to determine when there are __________ changes to their processes over time.

__________ is data that can be gathered by answering one true-or-false question.

Examples of charts used for variable data are the X bar and R chart and the __________.

Control charts are used to determine __________.

Control charts can be used in a manufacturing operation to determine __________.

The process determines the __________ of a control chart.