NEW
Font size
WorksheetsL1MV27 Lubrication
Total questions: 10
Worksheet time: 5mins
Which part of the lubrication system removes unwanted impurities?
Filter
Galleries
Sump
Pressure relief valve
When the engine is turned off where does most of the oil collect?
In the galleries
In the cylinders
In the sump
In the filter
Which type of oil would be better for high temperatures?
High viscosity
Low viscosity
What is between the sump and the bottom of the cylinder block?
Oil
A gasket
Oil pump
Drain plug
What is used to measure the level of oil in the sump?
Oil Filter
Dipstick
Oil pan
Oil pump
What is the purpose of the splines on the crankshaft?
To make sure the oil only flows in one direction
To keep the oil clean
To drive the pump inner gear
To seal the pump unit
If the top gear of a gear oil pump turns in a clockwise direction, in which direction does the other gear turn?
Clockwise
Counterclockwise
Where does the oil enter an oil filter?
Through the bottom tube
Through the feed holes
Through the centre tube
Through the paper
Where does the oil filter housing connect to?
To the cylinder block
To the dipstick
To the radiator
To the oil pump
If an oil cooler heat exchanger is fitted, where would its hoses normally directly connect to?
The cylinder head
The radiator
The galleries
The oil filter assembly
