Architecture Tab > Datum

Architecture Tab > Datum > Grid

Architecture Tab > Datum > Grid > Place grid

Architecture Tab > Datum > Grid > Pick lines

Architecture > Build > Wall > Generic 200mm

Architecture > Build > Wall > Generic 200mm > Edit Type > Duplicate > Generic - 150mm > Structure > Edit > > Thickness > 150 > enter > OK > Click Wall to wall boundary

Architecture > Build > Wall > Generic 150mm

Architecture > Build > Wall > Generic 200mm > Edit Type > Duplicate > Generic - 100mm > Structure > Edit > > Thickness > 100 > enter > OK > Click Wall to wall boundary

Architecture > build > floor > Floor Generic 100mm

Architecture > build > floor > Floor Generic 100mm > Offset: 0 mm > Extend into wall (to core) > base offset : (0-apron & bath)

(50 - lantai dlm rumah) > Panel Draw > Pick Walls > Klik dinding sebelah dalam

Architecture > build > floor > Floor Generic 150mm

Architecture > build > floor > Floor Generic 150mm > Offset: 0 mm > Extend into wall (to core) > base offset : (0-apron & bath)

(50 - lantai dlm rumah) > Panel Draw > Pick Walls > Klik dinding sebelah dalam

Architecture > Build > Window >

Architecture > Build > Window > pilih window type > pilih size

> letak window di tempat yang dikehendaki

Architecture > Build > Window > modify /place window > load family > US Metric > pilih window type > pilih size > letak window di tempat yang dikehendaki

Architecture > Build > Window > modify /place window

Architecture > Build > Door > modify/place > door >

Architecture > Build > Door > modify/place > door > load family > US Metirc > pilih door type > pilih door size > letak door di tempat yang dikehendaki

Architecture > Build > Door >

Architecture > Build > Door > pilih door type > pilih door size

> letak door di tempat yang dikehendaki

Floor plan > Ceiling > Level 1 > Architecture > Build > Ceiling > Automatic Sketch

Architecture > Build > Ceiling > Automatic Sketch

Floor plan > Ceiling > Level 2 > Architecture > Build > Ceiling > Automatic Sketch

Architecture > Build > Ceiling >

Architecture > Build > Roof > Picklines > Offset 900

Floor Plan > Level 1 > Architecture > Build > Roof > Overhang : 900> Tick Extend to wall/core > Pilih rectangle > pilih sempadan bumbung >

Architecture > Build > Roof >

Floor Plan > Level 2 > Architecture > Build > Roof > Overhang : 900> Tick Extend to wall/core > Pilih rectangle > pilih sempadan bumbung >

Select floor yang berkenaan> Edit boundary > edit kawasan> click green tick

Edit boundary > edit kawasan> click finish

edit footprint > click green tick

Select roof yang berkenaan > edit footprint > matikan tick pada Define Slope pada dua arah bertentangan > click green tick