wayground logo

Free Printable Worksheets

Font size

S
M
L
XL
Worksheets

Steering System C3 vol 2

Total questions: 50

Worksheet time: 38mins

Name
Class
Date
1.

On a electric power steering system what part generates the power assist?

a)

Hydraulic Pump

b)

Rack and Pinion

c)

Electric Motor

d)

Steering Wheel

2.

On a hydraulic power steering system what part acts as the distribution system?

a)

Pump

b)

Lines

c)

Steering Gear

d)

Reservoir

3.

What is the name of the part that links the steering wheel to the steering gearbox(rack and pinion or worm gear)?

a)

Steering Gearbox

b)

Steering Column

c)

Tie Rod

d)

Pitman Arm

4.

What is the name of this part?

a)

Socket

b)

Universal Joint

c)

Flexer

d)

Steering Shaft

5.

True or False: A vehicle having a power steering reservoir is likely to be a electric power steering system.

a)

True

b)

False

6.

True or False: A hydraulic power steering pump is driven by the engine through a belt and a pulley.

a)

True

b)

False

7.

In a hydraulic power steering system what part generates hydraulic pressure?

a)

Power Steering Pump

b)

Hydraulic Piston

c)

Rotary Control Valve

d)

Rack and Pinion

8.

Name this component?

a)

Steering Knuckle

b)

Tie Rod

c)

Center Link

d)

Pitman Arm

9.

What three parts are not used on the rack and pinion system (bottom) that are used on linkage style system (top)?

a)

Idler Arm, Pitman Arm, Center Link

b)

Tie Rod, Rack and Pinion, Steering Knuckle

c)

Steering Knuckle, Tie Rod, Pitman Arm

d)

Idler Arm, Center Link, Tie Rod

10.
Steering assist can either be electric or
a)
Gas
b)
Water
c)
Hydraulic
d)
pinion
11.
Power assist makes it harder for the driver to steer the vehicle
a)
True
b)
False
12.
What are the basic benefits of a four wheel steering system?
a)
Improved stability 
b)
Reduced turning radius
c)
Improved handling 
d)
All of the above
13.
Rack and pinion steering ________.
a)
is lighter in weight and has fewer components than parallelogram steering
b)
does not provide as much feel for the road as parallelogram steering
c)
does not use tie-rods in the same fashion as parallelogram steering
d)
  is only used when the turbo makes too much horse pressures.
14.
In a rack and pinion steering system, what protects the rack from contamination?
a)
the inner tie-rod socket
b)
spaghetti
c)
spider monkeys 
d)
the bellows boots
15.
Wandering or poor straight-ahead tracking may be caused by all of the following except 
a)
worn or loose rack mount bushings
b)
Minecraft Kahoot
c)
off center steering gear
d)
loose or worn tie rod ends
16.
A rack and pinion steering gear _____.
a)
has tie-rods that connect the rack directly to the steering arms
b)
is a gear in which the rack needs an idler arm to change the direction of the steering arms 
c)
has inner tie-rod ends that are pressed onto the rack
d)
has more friction points compared to a parallelogram steering linkage
17.
Gearbox ratio is defined by the number of input turns it takes to make one turn of the output.
a)
True 
b)
False 
18.
Power steering sytems use hoses and lines to transmit fluid from the pump to the steering gear.
a)
True
b)
False 
19.

How is wheel alignment adjusted

a)

by lengthening and shrtening the drag link

b)

By lengthening and shortening the track rod

c)

By lengthening and shortening the panhrad rod

d)

By lengthening and shortening the steering column

20.

What type of oil is used in a hydraulic poower steering system?

a)

5W30

b)

EP 75W-90

c)

ATF

d)

CERATEC

21.

What does KPI stand for?

a)

King Pin Identification

b)

King Pivot inclination

c)

Key Performance Indicator

d)

King Pin Inclinatiom

22.

Where would a technician find the maximum amount of wear alowed in a track rod end ?

a)

DVSA manual

b)

Service sheet

c)

Drivers handbook

d)

Autodata

23.

A possible cause of a front tyre wearing on the outer edge faster than the tread would be

a)

Incorrect camber

b)

Incorrect toe out

c)

Tyre over inflation

d)

Incorrect toe in

24.

Power assist is given to the steering system using?

a)

Electric and Hydraulic Assist

b)

Magnetic Assist

c)

Engine Oil Assist

d)

Brake Fluid Assist

25.

The picture attached shows a four wheel steering system. At low speeds the rear wheels turn in the _________________ direction as the front wheels.

a)

Same

b)

Opposite

26.

What is equipment pictured?

a)

Laser alignment system

b)

Headlamp aligner

c)

Dunlop gauge

d)

Emission tester

27.

Which type of steering system is best for reducing engine power loss, reducing weight, and reducing maintenance?

a)

Hydraulic Power Steering

b)

Electric power steering

c)

Parallelogram Power Steering

28.

The items in the picture belong to what system?

a)

McPherson Strut Suspension

b)

Parallelogram Steering

c)

Rack and Pinion Steering

d)

Multi link Suspension

29.

This component is used for adjusting which alignment angle?

a)

Camber

b)

Caster

c)

Toe

d)

Thrust Angle

30.
Name this component
a)
Ball joint
b)
tie rod end
c)
control arm 
d)
socket
31.
Name this component
a)
radius arm
b)
control arm
c)
strut
d)
steering rack
32.
Name this component
a)
u bolt
b)
leaf spring
c)
sway bar
33.
Name this component 
a)
Strut
b)
shock
c)
coil spring 
34.
Name this component
a)
control arm
b)
sway bar 
c)
steering knuckle 
35.
Which angle does not affect tire wear?
a)
caster
b)
camber 
c)
toe
36.
What component is number 1?
a)
Rim
b)
Wheelbearing
c)
Spindle
d)
Axle
37.
What component is number 2?
a)
Rim
b)
Wheelbearing
c)
Knuckle
d)
Axle
38.
What component is number 3?
a)
Torsion Bar
b)
Steering Bracket
c)
Caliper
d)
Strut
39.
What component is number 4?
a)
Coil Spring
b)
Strut Cover
c)
Leaf Spring
d)
Axle dampener
40.
What component is number 5?
a)
Coil Spring
b)
Strut Dust Bellow or boot
c)
Tie rod
d)
Pitman Arm
41.
What component is number 6?
a)
Baffle
b)
Strut Cover
c)
Upper strut mount
d)
Nut
42.
What component is number 9?
a)
K member
b)
Torsion Bar
c)
Axle Support
d)
Lower Control Arm
43.
What component is number 10?
a)
Ball joint
b)
Lower control arm bushing
c)
Arm bearing
d)
Flex seal
44.
What component is number 11?
a)
Strut Brace
b)
Brake Rod
c)
Subframe
d)
Stabilizer Bar
45.
What component is number 13?
a)
Stabilizer bar bushing
b)
Axle nut
c)
Tie rod
d)
Pitman Arm
46.
Name this component 
a)
lock nut
b)
castle nut
c)
acorn nut 
47.
Name this component
a)
hitch pin
b)
cotter pin 
c)
anchor pin 
48.
Name this component 
a)
sway bar
b)
bushing 
c)
tie rod 
49.
Name this component 
a)
Tie rod end 
b)
inner tie rod 
c)
hammer
50.

The part number (1) in the steering system is

a)

Hydraulic piston

b)

Rotary control valve

c)

Power steering rack

d)

Hydraulic pump

Similar Resources on Wayground

BMSN - CCR Fall 2025 Midterm Study Guide

52 questions

BMSN - CCR Fall 2025 Midterm Study Guide

quiz

Worksheet

•

8th Grade - University

yoga quiz 2

50 questions

yoga quiz 2

quiz

Worksheet

•

University

Mechanic Motor Vehicle

51 questions

Mechanic Motor Vehicle

quiz

Worksheet

•

Professional Development

THERMAL ENGINEERING II MCQ (MODEL EXAM - 2)

50 questions

THERMAL ENGINEERING II MCQ (MODEL EXAM - 2)

quiz

Worksheet

•

University

E Vehicle Technology and Policy

50 questions

E Vehicle Technology and Policy

quiz

Worksheet

•

University

MID TERM EXAMINATION CURRICULUM and DEVELOPMENT

50 questions

MID TERM EXAMINATION CURRICULUM and DEVELOPMENT

quiz

Worksheet

•

University

Unit 2 Assessment (MT Traffic Safety)

50 questions

Unit 2 Assessment (MT Traffic Safety)

quiz

Worksheet

•

9th Grade - University

Forensic Ballistics Quiz

50 questions

Forensic Ballistics Quiz

quiz

Worksheet

•

University