WorksheetsTrans 2
Total questions: 39
Worksheet time: 12mins
In order to get output from a planetary gearset what much happen?
Drive a member
Hold or stop a member
Drive a member and hold a member
None of these
This is the center gear of a planetary gear set.
Ring gear
Pinion
Carrier
Sun gear
This is the outermost gear of the planetary gear set.
Ring gear (annulus)
Pinions
Carrier
Sun gear
Check all parts of a simple planetary gearset.
Sun gear
Carrier and pinions
Output shaft
Ring gear (annulus)
Input shaft
The Planetary gear set is used in automatic transmissions because?
They are cheap to produce
simple compared to manual tranmission gear boxes
Strong and compact
Easier to understand
The apply devices in the transmission hold, stop or drive different members of the planetary gearset.
True
False
What happens if two members of the planetary gear set are driven? (select all correct)
The gear set locks up and spins together
Direct drive 1:1
underdrive
Over drive
Name the component in the picture
automatic trans front pump
rear output shaft
turbine spline
pump housing
A small gear (input) has 5 teeth and the larger (output) gear has 25 teeth. This would be a ratio of:
5:1 gear reduction
1:5 gear reduction
2:4 gear reduction
6:1 gear reduction
Which of these is considered to be a holding device in a transmission?
band
Multi-disc clutches
one - way clutches
all of the above
True or false : An automatic transmission uses a Flywheel.
True
False
Name the component in the picture :
drum
band
clutch locker
one way friction valve
This component sends fluid and hydraulic pressure to the components inside a transmission
front hydraulic pump
servo
fluid coupler
planetary gear set
A planetary gear set consist of a Sun gear, planetary gears and a __________________.
valve body
check valve
clutch disc
planet carrier
What component is pictured?
Torque Convertor
Clutch Pack
Valve Body
Planetary Gear Set
The job of the transmission is to (select all correct answers)
Multiply and divide torque by providing different gear ratios
Provide the vehicle with a way of moving in reverse
Multiplying the fuel consumption of the vehicle
All of the above
Shift forks, synchronizers and blocker rings are part of which type of transmission?
Manual
Automatic
Dual Clutch
Standard
What does the pan bolt to on an automatic transmission system?
Converter housing
Extension housing
Transmission case
Differential housing
What part is the torque converter bolted to?
Flywheel
Turbine
Stator
Input shaft
Which of these gears is not part of a planetary gear system in an automatic transmission system?
Sun gear
Moon gear
Ring gear
Planet gear
What is used to clamp components of planetary gearsets?
Screws
Nuts and bolts
Friction
Adhesive
What tool should be used to check runout of a flywheel?
dial indicator
wrench
straight edge
micrometer
Clutch connects
Engine & Transmission
Engine & Differential
Transmission & Differential
Pressure Plate
Flywheel
Clutch Plate
Clutch Plate
Pressure Plate
Flywheel
Clutch Plate
Flywheel
Pressure Plate
When calculating gear ratios in a simple gear train, which is the correct formula?
Driven divided by Driver
Driver multiplied by Driven
Driven multiplied by Driver
Driver divided by Driven
