WorksheetsHAND TOOL TOP 20
Total questions: 15
Worksheet time: 8mins
The jaws in this type of wrench open parallel with the help of a
screw thus providing suitable for all sizes of nuts. These are
Pipe wrenches
Monkey wrenches
Socket wrenches
Allen wrenches
Which one of the following types of hammers is used for forming
a rivet head by spreading the shank of the rivet?
(a) Ball peen hammer
(b) Cross peen hammer
(c) Straight peen hammer
(d) Soft hammer
for general purpose, a bench vice is fixed at a height of
(a) 80 cm
(b) 90 cm
(c) 106 cm
(d) 125 cm
Vice clamps are used to
(a) protect the finished surfaces of the job
(b) hold the job firmly
(c) protect the serrated jaws of the vice
(d) protect the file
The movable jaw of a bench vice is not moving even though the
spindle is turned. It is due to the reason that
(a) fixed and movable jaws are over tight
(b) spindle pin is broken
(c) spring is not functioning
(d) threads on spindle are slightly worn out
The peen of a cross-peen hammer is
(a) angular to the handle
(b) straight to the handle
(c) cross to the handle
(d) bent towards the handle
A
B
C
D
The peen of a straight peen-hammer is
(a) angular to the handle
(b) straight to the handle
(c) cross to the handle
(d) bent towards the handle
A
B
C
D
The bench vice is called as parallel jaw vice because
(a) it can hold the jobs having parallel sides
(b) it is fixed parallel to the shop floor
(c) its width of jaws are parallel
(d) its movable jaw moves parallel to the fixed jaw
A
B
C
D
The box nut of a bench vice is made of
(a) mild steel
(b) phosphorous bronze
(c) white metal
(d) alloy steel
A
B
C
D
The jaw plates of a bench vice are made of
(a) tool steel
(b) mild steel
(c) cast iron
(d) bronze
A
B
C
D
Eye hole of hammer is
a. Straight
b. Tapered at handle end
c. Tapered from both ends
d. Tapered from front end
A
B
C
D
The height of the vice top should be
a. 5 cm to 8 cm below the elbow height of the operator
b. 5 cm to 8 cm above the elbow height of the operator
c. Just at elbow label
d. None of the above
A
B
C
D
Which is the function of a pipe vice?
a. grips the work at four point
b. The screw is vertical
c. The movable jaw moves vertically
d. All the above
A
B
C
D
Usually the width of hand vice jaw is
(a) 95 to 180mm
(b) 40 to 45 mm
(c) 80 to 140 mm
(d) 125 to 150 mm
A
B
C
D
A divider is used for
(a) scribing circles
(b) scribing arcs
(c) transferring and stepping of distance
(d) all of the above
A
B
C
D
