wayground logo

Free Printable Worksheets

Font size

S
M
L
XL
Worksheets

Year 11 GAIT term 3 week 8

Total questions: 130

Worksheet time: 2hrs 30mins

Name
Class
Date
1.

How Many GBs does a Terabyte have?

a)

1024

b)

8

c)

100

d)

1

2.

What is the smallest measurement used to measure a computer memory ?

a)

Megabyte

b)

Terabyte

c)

Yottabyte

d)

Bits

3.

What are the types of Computer Memory ?

a)

Primary memory and Secondary memory

b)

Non of these

c)

Primary memory

d)

Secondary memory

4.

What are the types of of Primary memory

a)

RAM and ROM

b)

RAM

c)

ROM

d)

CD

5.

What is an example for a secondary memory ?

a)

RAM

b)

ROM

c)

Pen Drive

d)

Charger

6.

What is the full form of RAM

a)

Read only memory

b)

Random Access Memory

c)

Radom Access memory

d)

non of these

7.

What is the full form of ROM

a)

Read only Memory

b)

Read or write memory

c)

non of these

8.

Ram is a Temporary Memory

a)

True

b)

False

9.

A secondary memory can also be called as

a)

Backup Memory

b)

Main memory

c)

Internal memory

10.
RAM & ROM are known as what kind of memory?
a)
Secondary storage
b)
Main memory
c)
Registers
d)
Flash memory
11.
What does the acronym RAM stand for?
a)
Random Alignment Memory
b)
Read Access Memory
c)
Random Access Memory
d)
Read All Memory
12.
What does the acronym ROM stand for?
a)
Read Only Memory
b)
Random Option Memory
c)
Read Once Memory
d)
Random Operating Memory
13.
Where is ROM usually found inside a computer?
a)
Inside the CPU
b)
As part of the hard drive
c)
On the motherboard
d)
With the CD drive
14.
In terms of computer memory, what is meant by the term 'volatile'?
a)
It retains its content when power is cut
b)
It loses its contents when power is cut
c)
It is not stable and should not be used
d)
Memory chips can overheat
15.
Which statement best describes RAM?
a)
Fast, permanent storage
b)
Slow, volatile stoage
c)
Fast, volatile storage
d)
Slow, permanent storage
16.
Which statement best describes ROM?
a)
A flash memory chip that contains a small amount of non-volatile memory
b)
A memory store containing a large amount of volatile memory
c)
A register within the CPU responsible for storing memory addresses
d)
A memory store containing a small amount of volatile memory
17.
What is usually held in the contents of RAM?
a)
BIOS and Boot sequence needed to start the computer
b)
Operating System and currently running programs
c)
Software programs stored within the computer
d)
Recently executed instructions in case they are needed again
18.
What is stored in Read Only Memory (ROM)?
a)
Recently opened programs
b)
Operating system and currently running programs
c)
BIOS and boot sequence (the computer's initial start-up process)
d)
The CPU's registers
19.
True or False? The closer a memory type is to the CPU, the slower it takes for the CPU to access the instructions and execute them. However, the closer it is to the CPU the larger and cheaper the memory is.
a)
TRUE
b)
FALSE
20.
Found in the computer's BIOS, what actually is the 'bootstrap'?
a)
The program which takes the computer through steps that lead up to the loading of the operating system (OS)
b)
The program responsible for loading the drives for peripheral devices like the keyboard and mouse
c)
The computer's initial start-up process
d)
The device used to attach the ROM to the computer's motherboard
21.
What is Virtual Memory?
a)
An additional memory slot located in one of the RAM ports
b)
A section of volatile memory created temporarily on the storage drive
c)
Memory stored in the 'cloud'
d)
Memory that doesn't exist inside the computer but on an external device such as a USB pen drive
22.
Why is Virtual Memory needed or used by a computer?
a)
When RAM becomes full because of too many programs running at once
b)
When ROM is too small and struggles to store the Operating System
c)
When users wish to store data on an external server such as 'the cloud'
d)
When chosen by the user or computer administrator
23.

Any part of the computer with a physical structure, including the parts inside.

a)

hardware

b)

software

c)

screen

d)

computer tower

24.

What is this hardware component?

a)

RAM

b)

Hard Drive

c)

USB

d)

Ethernet

25.

A computers long term memory is stored on the __________.

a)

Random access memory

b)

CPU

c)

Motherboard

d)

Hard Drive

26.

What is this hardware component?

a)

motherboard

b)

CPU

c)

power supply

d)

graphics card

27.

The brain of the computer that processes info and carries out commands.

a)

motherboard

b)

RAM

c)

hard drive

d)

CPU

28.

What hardware component is this?

a)

CPU

b)

motherboard

c)

RAM

d)

Remote Access Memory

29.

The main circuit board that holds and connects main parts of the computer

a)

CPU

b)

RAM

c)

Ethernet

d)

Motherboard

30.

Name these ports.

a)

SSD

b)

USB

c)

RAM

d)

VGA

31.

This port is used to connect.....

a)

The mouse

b)

The keyboard

c)

The Monitor

d)

The printer

32.

The blue cord that connects computers to display devices

a)

HDMI

b)

VDI

c)

DMI

d)

VGA

33.

This cord connects the....

a)

monitor to the computer

b)

computer to the internet

c)

printer to the computer

d)

mouse to the computer

34.

This hardware component is called?

a)

the printer

b)

the monitor

c)

the tv

d)

the CPU

35.

This port is used to connect the computer to the.....

a)

printer

b)

monitor

c)

internet

d)

keyboard

36.

A computers short term memory used to complete calculations

a)

hard drive

b)

cloud storage

c)

RAM

d)

disc drive

37.

You would plug the power cord into port number....

a)

3

b)

6

c)

7

d)

12

38.

You would plug the VGA connector into port number

a)

3

b)

8

c)

10

d)

11

39.

You would plug the ethernet cord into port number...

a)

3

b)

4

c)

7

d)

8

40.

You would plug the mouse into port number....

a)

3

b)

7

c)

8

d)

11

41.

Which of the following would NOT be plugged into a USB port?

a)

printer

b)

mouse

c)

monitor

d)

keyboard

42.

Which of the following is NOT a hardware component for a computer?

a)

mouse

b)

motherboard

c)

Microsoft Word

d)

CPU

43.
Is a data storage device that uses magnetic storage to store and retrieve digital information using one or more rigid rapidly rotating disks (platters) coated with magnetic material.
a)
RAM
b)
Hard Disk
c)
DVD
d)
ROM
44.
Is the electronic circuitry within a computer that carries out the instructions of a computer program by performing the basic arithmetic, logical, control and input/output (I/O) operations specified by the instructions.
a)
USB
b)
ROM
c)
CPU
d)
UPS
45.
Is the main printed circuit board (PCB) found in general purpose microcomputers and other expandable systems. It holds and allows communication between many of the crucial electronic components of a system
a)
Video Card
b)
Sound Card
c)
Motherboard
d)
Network Card
46.
Is an electrical device that supplies electric power to an electrical load. The primary function of a power supply is to convert electric current from a source to the correct voltage, current, and frequency to power the load.
a)
USB
b)

CPU

c)
RAM
d)
Power Supply
47.
Fans attached to components are usually used in combination with a heat sink to increase the area of heated surface in contact with the air, thereby improving the efficiency of cooling.
a)
Cooling Fan
b)
Heating Fan
c)
Hard d]Disk Fan
d)
DVD Fan
48.
Is an internal expansion card that provides input and output of audio signals to and from a computer under control of computer programs.
a)
Graphic Card
b)
Sound Card
c)
TV Card
d)
Network Card
49.
Is an expansion card which generates a feed of output images to a display. Frequently, these are advertised as discrete or dedicated graphics cards, emphasizing the distinction between these and integrated graphics.
a)
Graphic Card
b)
Sound Card
c)
TV Card
d)
Network Card
50.
Is an electronic device that connects a computer to a computer Network, usually a LAN.
a)
Graphic Card
b)
Sound Card
c)
TV Card
d)
Network Card
51.
Is a hand-held pointing device that detects two-dimensional motion relative to a surface. This motion is typically translated into the motion of a pointer on a display, which allows a smooth control of the graphical user interface.
a)
Mouse
b)
Light Pen
c)
Touch Pad
d)
Trackball Mouse
52.
A display screen used to provide visual output from a computer, cable box, video camera, VCR or other video generating device.
a)
Projector
b)
Printer
c)
Monitor
d)
Speakers
53.
A device that projects an enlarged image of an acetate or other transparency placed on it on to a wall or screen.
a)
Projector
b)
Printer
c)
Monitor
d)
Speakers
54.
Is a peripheral device which makes a persistent human-readable representation of graphics or text on paper.
a)
Projector
b)
Printer
c)
Monitor
d)
Speakers
55.
A device that converts analog audio signals into the equivalent air vibrations in order to make audible sound.
a)
Projector
b)
Printer
c)
Monitor
d)
Speakers
56.
Is a device that captures images from photographic prints, posters, magazine pages, and similar sources for computer editing and display.
a)
Projector
b)
Printer
c)
Monitor
d)
Scanner
57.
A video camera connected to a computer, allowing its images to be seen by Internet users.
a)
Webcam
b)
Speakers
c)
Keyboard
d)
Light Pen
58.
Is a typewriter-style device which uses an arrangement of buttons or keys to act as a mechanical lever or electronic switch. 
a)

Mouse

b)
Speakers
c)
Keyboard
d)
Light Pen
59.
A machine allowing the creation of a physical object from a three-dimensional digital model, typically by laying down many thin layers of a material in succession.
a)
Inkjet Printer
b)
Laser Printer
c)
Dot Matrix Printer
d)
3D Printer
60.
Is a device that analyses a real-world object or environment to collect data on its shape and possibly its appearance. The collected data can then be used to construct digital three-dimensional models.
a)
Handheld Scanner
b)
3D Scanner
c)
Flatbed Scanner
d)
Sheetfed Scanner
61.
Monitor
a)
input devices
b)
output devices
c)
storage devices
d)
processor
62.
Mouse
a)
input devices
b)
output devices
c)
storage devices
d)
processor
63.
Keyboard
a)
input devices
b)
output devices
c)
storage devices
d)
processor
64.
Printer
a)
input devices
b)
output devices
c)
storage devices
d)
processor
65.
Plotter
a)
input devices
b)
output devices
c)
storage devices
d)
processor
66.
Scanner
a)
input devices
b)
output devices
c)
storage devices
d)
processor
67.
Touchpad
a)
input devices
b)
output devices
c)
storage devices
d)
processor
68.
Speaker
a)
input devices
b)
output devices
c)
storage devices
d)
processor
69.
Hard disk
a)
input devices
b)
output devices
c)
storage devices
d)
processor
70.
Central Processing Unit (CPU)
a)
input devices
b)
output devices
c)
storage devices
d)
processor
71.
Central Processing Unit (CPU)
a)
input devices
b)
output devices
c)
storage devices
d)
processor
72.
Microfon
a)
input devices
b)
output devices
c)
storage devices
d)
processor
73.
Microfon
a)
input devices
b)
output devices
c)
storage devices
d)
processor
74.
Webcam
a)
input devices
b)
output devices
c)
storage devices
d)
processor
75.
LCD Projector
a)
input devices
b)
output devices
c)
storage devices
d)
processor
76.
Joystick
a)
input devices
b)
output devices
c)
storage devices
d)
processor
77.
Pendrive
a)
input devices
b)
output devices
c)
storage devices
d)
processor
78.
Which is the main circuit board of the computer?
a)
Processor
b)
Motherboard
c)
Hard Disk
d)
ROM
79.
Adapter cards slide into ____.
a)
PCIe slots
b)
memory slots
c)
processor slots
d)
power slots
80.
Which is not the best example of a peripheral?
a)
Printer
b)
Speakers
c)
Hard Disk
d)
Keyboard
81.
Which is measured in GHz?
a)
Processor
b)
Hard Disk
c)
RAM
d)
Power Supply
82.
Which can be the most expensive piece of hardware?
a)
Processor
b)
Hard Disk
c)
Motherboard
d)
Power Supply
83.
Which loses its contents when the power is turned off?
a)
ROM
b)
RAM
c)
Hard Disk
d)
Power Supply
84.
What type of drive is typically faster than a standard hard disk?
a)
SSD
b)
DDS
c)
SDS
d)
DSD
85.

The scope is the foundation of:

a)

Your cost estimate and the project schedule

b)

Scope creep

c)

Client communication

d)

The building and testing phase

86.

Which of the following are NOT part of a project plan?

a)

Schedule and due dates

b)

Project scope and tasks

c)

Costs and resource allocation

d)

Scope creep and change requests

87.

The project scope establishes which boundaries for the client?

a)

Deadlines and due dates

b)

Resource allocation limits

c)

Budget and cost limits

d)

Tasks that are and are not included

88.

What size of design firm should use project management techniques?

a)

All sizes: large firms need specialized software, but even a staff of one can benefit

b)

The huge star designer firms in New York and other big cities

c)

Firms of any size, but only when they work on large, complex projects

d)

Firms with more than five designers on staff

89.

How are project costs calculated?

a)

By adding human resources (staff hours times billing rates), plus the marked-up costs of material resources

b)

By adding up the costs of all materials

c)

By a calculation so complicated only a computer could do it

d)

By multiplying the human resources by the material resources

90.

During the design phase and the building and testing phase, how can milestone client reviews help your design project?

a)

You get client signoff on the final project.

b)

You get client feedback on your designs and clear up any misunderstandings.

c)

You can ask the client for a contract for his next project, too.

d)

You can tell exactly where the client is completely wrong.

91.

What are the four typical phases in a project?

a)

Planning and analysis phase; design phase; building phase; implementation or publishing phase

b)

Planning phase; analysis phase; design phase; building and testing phase

c)

Planning phase; analysis phase; testing phase; implementation phase

d)

Planning and analysis phase; design phase; building and testing phase; implementation or publishing phase

92.

During which phase are the systems set up for monitoring the three main elements of the project plan (scope, schedule, and costs)?

a)

Building and testing phase

b)

Implementation or publishing phase

c)

Design phase

d)

Planning and analysis phase

93.

What role does analysis play in the planning and analysis phase?

a)

Figuring out the best way to get the project done

b)

How to handle scope creep

c)

How to get from point A to point B

d)

How to handle a challenging client

94.

During which phase of a project is the project plan most closely monitored?

a)

Design phase

b)

Planning and analysis phase

c)

Implementation or publishing phase

d)

Building and testing phase

95.

How can you tell if a project is veering off course?

a)

Use your intuition.

b)

Schedule peer and client reviews.

c)

Ask the team leaders how their work is going.

d)

Monitor closely, during the building and testing phase, the project scope, schedule, and costs.

96.

Why can most design work be considered projects?

a)

It's visual and unique.

b)

It's cutting-edge and unique.

c)

It's temporary and unique.

d)

It's temporary and beautiful.

97.

What are two common problems in project management?

a)

Internal staff conflict and unattainable deadlines

b)

Scope creep and mismatch of methods to the project or the client

c)

Lack of funds and human resources

d)

Lack of client communication and product testing

98.

During which project management phase is client communication key?

a)

Design phase

b)

Planning and analysis phase

c)

Building and testing phase

d)

All phases

99.
The main reasons for projects failure are:
a)
Time management; Costs management; Scope Management and Quality Management
b)
Only Time and Cost Management
c)
Only Scope and Quality Management
d)
Generally Cost Management because you can never have enough money to complete most projects
100.
The major differences between  projects and operations are:
a)
Projects are ongoing and operations are short
b)
Projects should always be done by engineers and operations may be performed by technicians
c)
Projects are temporary and operations are ongoing
d)
Projects and operations are the same thing but projects always costs more to implement
101.

Uncontrolled addition of technical features to a system :

a)

Scope creep

b)

Constraints

c)

Interruptions

d)

Feature creep

102.

Who are the stakeholders in a project?

a)

Those who are sponsoring your project and provide its resources

b)

Those who will be affected by the project's outcome and are involved at specific stages

c)

The people who carry out your delegated tasks throughout the project's duration

d)

Those who have expertise in specific areas and provide you with advice where necessary

103.

The scope is the foundation of:

a)

Your cost estimate and the project schedule

b)

Scope creep

c)

Client communication

d)

The building and testing phase

104.

What are the four typical phases in a project?

a)

Planning and analysis phase; design phase; building phase; implementation or publishing phase

b)

Planning phase; analysis phase; design phase; building and testing phase

c)

Planning phase; analysis phase; testing phase; implementation phase

d)

Planning and analysis phase; design phase; building and testing phase; implementation or publishing phase

105.

What role does analysis play in the planning and analysis phase?

a)

Figuring out the best way to get the project done

b)

How to handle scope creep

c)

How to get from Point A to point B

d)

How to handle a challenging client

106.

What am I? I am the things you need to be able to complete a task or activity

a)

Deadlines

b)

Durations

c)

Resources

d)

Timescales

107.

In ___________ stage, the multimedia team will identify criteria for specific target user.

a)

planning

b)

designing

c)

testing

d)

delivering

108.

The second stage of multimedia development is ___________.

a)

Idea Analysis

b)

Testing

c)

Development

d)

Implementation

109.

A series of graphics that outline the visual details of a multimedia project is called:

a)

a storyboard

b)

a pictogram

c)

an icon

d)

a composite

110.

Which of these images shows a Storyboard?

a)
b)
c)
d)
111.

What is the purpose of a storyboard?

a)

A storyboard is a way for you to complete your work.

b)

Use a storyboard to set up all of your ideas before starting your project.

c)

A storyboard is the same as a whiteboard

d)

A storyboard can only be used for research

112.

Choose testing used in multimedia

a)

Gamma Testing

b)

Alpha Testing

c)

User Testing

d)

Beta Testing

113.

Identify basic stage of multimedia project development.

a)

Planning, Development, Testing, Documentation, Implementation

b)

Implementation, Development, Documentation, Planning, Testing

c)

Planning, Development, Testing, Implementation, Documentation

d)

Development, Planning, Testing, Implementation, Documentation

114.

The final stage of the project life cycle is..

a)

Initiation

b)

Planning

c)

Execution

d)

Evaluation

115.

A SWOT analysis identifies...

a)

Something Which Otherwise Threatens

b)

Strengths Weaknesses Opposition Threats

c)

Strengths Weaknesses Opportunities Threats

d)

Separations Weaknesses Oppositions Threats

116.

Which project management tool gives a graphic representation of the project's timeline?

a)

Stakeholder matrix

b)

RACI matric

c)

Critical Path Analysis

d)

Gantt chart

117.

The third stage of the project life cycle is...

a)

Closure and evaluation

b)

Execution

c)

Planning

d)

Initiation

118.

Which of the following is considered malware?

a)

spyware

b)

anti-virus software

c)

open source software

d)

Apps

119.

You computer is running slow and you are having trouble connecting to websites. What should you do?

a)

Check power source and internet cables

b)

Check internet cables and network connections, and do a virus scan

c)

Check power cords, internet connections, and do a virus scan

d)

Check power cords, all cables going in and out of the computer, check internet connections, check network connections, do a virus scan and restart.

120.

You can't get on your school's network(not internet). What should you check first?

a)

Your cable company

b)

cables going into and out of your computer

c)

your internet connection

d)

cable connected to your monitor

121.
Choose one solution for the following problem: an application is running SLOWLY.
a)
Restart the computer
b)
Try to access the application from the internet instead
c)
Close and re-open the application
d)
Just forget it and work in another application
122.
Choose one solution for the following problem: the computer is FROZEN.
a)
Press and hold the Power button for 5-10 seconds to force the computer to shut down.
b)
Close all applications and restart
c)
Unplug all plugs on the computer and plug them back in
d)
Hold down the monitor power button until the computer shuts down.
123.
Choose one solution for the following problem: the sound isn't working.
a)
Check the volume level
b)
Use different headphones
c)
Buy speakers
d)
restart you computer
124.
Choose one solution for the following problem: the mouse or keyboard has stopped working.
a)
Press the Ctrl+Alt+Delete (the Control, Alt, and Delete keys) on your keyboard and click the mouse twice to reset the hardware
b)
If you're using a wired mouse or keyboard, make sure it's correctly plugged into the computer
c)
Move to a different computer, they are probably broken
d)
Hold down on the right click and/or the backspace key to reset the hardware
125.
Troubleshooting is always a process of...
a)
random act to get the solution you want 
b)
trial and error
c)
trying different things
d)
not knowing what you are doing
126.
Choose one solution for the following problem: The screen is blank.
a)
Make sure the monitor and computer are plugged in and turned on
b)
Hit the power button on the screen only
c)
Check mouse to see if the light is turned on
d)
Restart your computer
127.
Choose one solution for the following problem: ALL programs on the computer run slowly
a)
Shut down the computer two times in a row
b)
Unplug your mouse and plug it back in
c)
Your computer may be running out of hard drive space. Try deleting any files or programs you don't need.
d)
Reorganize the files on your computer. This is making the computer think too hard.
128.

this picture means?

a)

the computer does not give out a sound

b)

the sound is to loud

c)

do talking in the classroom

129.
Choose one solution for the following problem: Power button will not start computer.
a)
Check the central processing unit (CPU) to see if it is working properly
b)
Check the power cord to confirm that it is plugged securely into the back of the computer case and the power outlet
c)
Check your internet access to see if you are connected to the internet
d)
Check to see if you have an Ethernet cable connection 
130.

Why is it important to have antivirus software installed on your computer?

a)

To track your finances

b)

To stop others from plagiarizing your work

c)

to prevent others from stealing your device

d)

To stop hackers from harming your computer

Similar Resources on Wayground

Hardware and Software Quiz

126 questions

Hardware and Software Quiz

quiz

Worksheet

•

9th - 12th Grade

Ôn Tập KT Giữa HKI -11-25.26

135 questions

Ôn Tập KT Giữa HKI -11-25.26

quiz

Worksheet

•

11th Grade

tin ktr

126 questions

tin ktr

quiz

Worksheet

•

11th Grade