wayground logo

Free Printable Worksheets

Font size

S
M
L
XL
Worksheets

AMT 212 - Midterm Quiz Bee 1

Total questions: 25

Worksheet time: 8mins

Name
Class
Date
1.

Choices below are the functions of a bonding jumper except:

a)

Ground return path for aircraft circuits that use single wire type systems

b)

Increasing radio frequency interference in sensitive aircraft systems.

c)

Decreasing the possibility of damage due to lighting strikes on control surfaces and other areas.

d)

Allowing static charges to move around easily and equalize.

2.

What flight instrument uses the ram air pressure from the pitot tube?

a)

Airspeed indicator

b)

Vertical speed indicator

c)

Altimeter

d)

All of these

3.

If an instrument is in a single unit or case that provides both sensing and indication, these instruments are known as?

a)

Direct-sensing instruments

b)

Remote-sensing instruments

4.

Aircraft instruments is ATA chapter #?

a)

21

b)

24

c)

26

d)

31

5.

The normal operating range is typically represented by a green arc on the circular gauge. For exact acceptable operating range, consult the?

a)

Manufacturer's operating and maintenance data.

b)

Airworthiness directive

c)

Aircraft structural manual

d)

Integrated parts catalog

6.

In the manifold pressure gauge, more power on the engine (reciprocating) results to?

a)

Less suction

b)

More suction

c)

Constant suction

d)

None of these

7.

A pressure ratio transducer is a sensing device used to convert the ratio into an _________ signal used by the gauge for indication.

a)

Mechanical

b)

Electrical

c)

Chemical

d)

None of these

8.

The following choices are some of the principal parts of an electrical resistance thermometer except:

a)

Indicating instrument

b)

Temperature-sensitive element (bulb)

c)

Plug connectors

d)

Drive shaft

9.

This powerplant instrument provides a visual temperature indication in the cockpit of the turbine exhaust gases as they leave the turbine unit.

a)

Turbine inlet temperature

b)

Exhaust gas temperature

c)

Total air temperature

d)

Static temperature

10.

Tachometer is derived from the word(s) tach and metron, where metron means measure and tach means?

a)

Torque

b)

Rotation

c)

Speed

d)

None of these

11.

Is an instrument used to indicate the height of the aircraft above a predetermined level.

(a)  

12.

Is an instrument used to indicate the aircraft's speed through the air.

(a)  

13.

Is an instrument used as the primary heading reference of an aircraft. Due to some precession errors this instrument is to be rest every 15 to 20 minutes.

(a)  

14.

Is an instrument used to determine the aircraft attitude and position in which it prevents aircraft from losing control.

(a)  

15.

If the turn coordinator does not receive any electrical power, a (a)   flag/color will be visible on the instrument itself.

16.

Under standard markings, color (a)   arc indicates when you are allowed as a pilot to extend the flaps.

17.

Under standard markings, color (a)   arc indicates caution range.

18.

This application of tachometer is used if the instrument panel is far from the engine being mounted.

(a)  

19.

On the EPR (Airbus A320 - ECAM) example given, the amber mark represents the?

a)

Minimum EPR limit

b)

Maximum EPR limit

20.

Which of the following choices below is my exact full name:

a)

Earl Vincent D. Malayao

b)

Ed Vincent R. Malayao

c)

Earl Vincent R. Malayao

d)

Erl Vincent R. Malayao

21.

Identify the sensing equipment shown.

a)

Bellows

b)

Diaphragm

c)

Capsules

d)

Bourdon tube

22.

Identify the sensing equipment shown.

a)

Bellows

b)

Bourdon tube

c)

Bellow

d)

Capsule

23.

Identify the sensing equipment shown.

a)

Bellow

b)

Diaphragm

c)

Bourdon tube

d)

Capsule

24.

Identify the sensing equipment shown.

a)

Diaphragm

b)

Bellow

c)

Capsule

d)

Bourdon tube

25.

What is the course code of our subject?

a)

AMT 211

b)

AVI 212

c)

AMT 212

d)

AMT 213