NEW
Font size
WorksheetsSpindle Sander Safety
Total questions: 15
Worksheet time: 8mins
Before turning on the sander what do you need to make sure of?
Get materials ready
Make sure there are no scraps between the spindle and the table
Make sure you have all your safety gear on
Get your bench all clear and clean
Always wear what kind of glasses?
Sunglasses
Swimming Goggles
Safety Glasses
Reading Glasses
When done with the spindle sander what do you need to do?
Grab your things and go to the next station.
Turn the machine off and leave.
Clean your area for the next person to use.
Turn the machine off and remain in the work zone until fully turned off.
How far away should you fingers stay from the sander?
1 inches
200 inches
8 inches
25 inches
Fill in the blanks. "Always ________ up your ________ , so they don't get caught in the sander."
Roll,Sleeves
Put, Sleeves
Keep, Hair
Wear, Hair
When we sand with the spindle sander what kind of pressure do we use?
All force
Light pressure
Hard pressure
No pressure at all
Which way do you need to sand your wood on the sander.
Up and down
Left to Right
Right to Left
After turning on the sander when can you start sanding?
Right away
When it gets up to full speed
Very little speed at all
When its at medium speed
"Never sand very ______ pieces with the spindle sander." Fill in the blank.
Big
Small
Why should we keep our stock moving across the sander at all times so we ...?
Wearing out the belt
Catching things on fire
Hurting someone
What do you need to do if a piece of wood gets stuck in the belt?
Go in right away and grab the wood while the sander is moving
When it slows down grab the wood out
Turn it off and wait till it stops ti clean the belt and make sure everything is clear
When the sander moves clockwise, which way should you move your project?
Up and Down
Side to side
Clockwise
Counter Clockwise
"Keep stock on ________ while sanding." Fill in the blank.
Lap
Table
Sander
Floor
If you don't hold onto your stock while sanding what could happen.
Someone get hurt
Hurt yourself
Stock gets stuck in the chute
Always know the ______ before operating the spindle sander.
Rules
Owners manual
Directions
