NEW
Font size
Worksheets2850-201 Mock-N.A
Total questions: 46
Worksheet time: 1hrs 23mins
Which engineering department will check the dimensions and quality of a finished product?
Inspection.
Maintenance.
Installation.
Production
What is the role of the union within a company?
Represent employees.
Supervise employees.
Train employees.
Monitor employees.
What type of safety sign has a yellow triangle with a black border?
Information.
Mandatory.
.
Prohibition.
Warning
What department is responsible for buying manufacture components?
Maintenance.
Purchasing.
Finance.
Inspection.
What does a schematic diagram show?
How parts fit together.
Material used.
Wiring layout.
Method of manufacture
What is the main responsibility of employees under the Health and Safety at Work Act 1974?
Attend training.
Purchase PPE.
Report accidents.
Provide training.
What type of drawing includes dimensions?
Layout.
Assembly.
Section.
Component
What is the purpose of documenting the production output by operators?
A, Monitoring production.
B, Changing production methods.
C, Increasing inspection frequency.
D, Provide traceability.
, What department is responsible for promoting a new product with customers?
A, Human Resources.
B, Goods Inward.
C, Marketing.
D, Quality Control.
What type of drawing would use symbols to represent the parts of a system?
A, Sometric.
B, Orthographic.
C, Schematic.
D, Oblique.
What type of document is used to record the quality of a product?
Procedure sheet.
Code of practice.
Inspection report.
Data sheets.
What method is used to control the processing of material through a manufacturing plant?
An action plan.
An inspection report.
A quality plan.
A procedure sheet.
Who is responsible for reporting accidents under the RIDDOR regulations?
HSE
The employer.
The injured person.
A colleague who witnessed the incident.
What is the first measure to control a hazard under the Control of Substances Hazardous to Health (COSHH) regulations?
Provide Personal Protective Equipment (PPE).
Use extraction at source.
Eliminate the use of hazardous product.
Enclose the process
What is the first main requirement for employees according to the HASAWA?
Provide Personal Protective Equipment (PPE).
Provide training for employees.
Carry out employee health monitoring
Carry out a risk assessment.
Who is responsible for reporting incidents under the RIDDOR regulations?
The employer of the injured person.
The person who has been injured.
A colleague who witnessed the incident.
A bystander who witnessed the incident
What is the most important reason for an organisation to regularly review its health and safety performance?
To produce a report following a major accident.
To check the number of accidents that have occurred.
To ensure policies and procedures protect staff.
To update procedures after an accident has occurred.
Before working in a confined space where fumes may be present, what is the best safe working practice?
Provide breathing apparatus.
Add oxygen to the air.
Ensure fire extinguishers are available
Test the air quality prior to entry.
Which one of the following is a human condition that could lead to an accident?
Inadequate lighting
Lack of training.
Inadequate ventilation.
Unguarded machinery.
What shape and main colour is used for a sign indicating an emergency exit?
Round and green.
Round and red.
Rectangular and red.
Rectangular and green.
What is the first action to be taken when someone has suffered an electric shock?
Call the emergency service
Isolate the electrical supply.
Call a company first aider.
.
Drag the person away from the electrical source
What action should be taken on hearing the fire alarm indicating premises must be evacuated?
Leave by the emergency exit and wait outside.
Leave by the emergency exit and report to the assembly point.
Leave by the emergency exit after collecting any personal possessions.
Leave by the emergency exit after being informed it is not a drill.
Why is it important that all accidents are reported and investigated?
To prove H&S is being managed effectively
To prevent accidents happening again.
To complete the accident book prior to inspection.
To provide accident statistics for H&S reports
What type of fire extinguisher should be used on fires involving electrical equipment?
Water fire extinguisher
Foam fire extinguisher.
CO2 fire extinguisher.
Wet chemical fire extinguisher.
Which colours identify a CO2 fire extinguisher?
All red with a blue panel.
All red with a cream panel.
All red with a black panel.
All red with a red panel.
What three elements are needed for a fire to be established and maintained?
Heat, fuel and argon.
Acetylene, propane and oxygen.
Argon, nitrogen and oxygen.
Heat, fuel and oxygen
The Management of Health and Safety at Work Regulations require employers to
ensure the minimum wage rate is paid.
undertake risk assessments.
provide child care facilities.
provide paid holidays.
What powers do Health and Safety Executive Inspectors have when investigating companies?
They can enter premises at any time.
They can only enter premises following five days’ notice.
They can only enter premises when invited by the employer.
They can only enter premises when invited by the union.
A hazard is:
Something to fall over
Something in the wrong place
Something with the potential to cause harm
A problem that has no solution
What reasons exist for managing health & safety? (Tick all that apply):
Legal
Economic
Moral
for slaving people
To order people around
Customer requirement
Risk is:
Not knowing what is around the corner
Something you are not sure about
Likelihood that harm from a hazard may be realised
A problem that is going to upset you
Noise is:
Loud sounds
Prolonged sounds
Unwanted sound
Concorde going overhead
If an electric drill gives off blue smoke from the motor, you should:
A: pour water over it
B: use a CO2 extinguisher
C: switch it off and report it
D: stop work for 30 minute
What material is contained in the following type of fire extinguisher...
Carbon Dioxide
Dry Powder
Foam
Water
The letters PUWER stand for…
Provide and use the correct working equipment
Provide and use of wrong equipment Regulations
Provision and use of work equipment Regulation
Provision and use of welding equipment Regulations
The symbol represent
1st angel projection
3rd angel projection
2nd angel projection
4th angel projection
What is the meaning of 'ISO'
Integrated System Operation
International System of work
International Standards Obligation
International Standards Organization
The drawing was made using:
3rd angle projection
2nd angel projection
4th angel projection
1st angel projection
What method was used to draw this Cube
Isometric Drawing
Plan Drawing
Real 3D Drawing
Oblique Drawing
Exploded Views:
Shows an object when it explode
is the representation of an exploding Object
can indicate the relative position on parts within a complex component
indicate the position of screws in equipment's
What is the primary purpose of conducting a risk assessment in the workplace?
To reduce costs.
To increase productivity.
To improve employee morale.
To identify potential hazards.
Which type of drawing is typically used to represent the layout of a building?
C, Section.
B, Elevation.
D, Perspective.
A, Floor plan.
What should be done if a fire extinguisher is found to be damaged?
Use it anyway.
Report it and replace it.
Try to fix it yourself.
Store it in a different location.
What is the main objective of a health and safety policy in the workplace?
D, To enhance customer satisfaction.
C, To reduce operational costs.
B, To increase employee productivity.
A, To ensure compliance with legal requirements.
Which of the following is a common method for identifying workplace hazards?
D, All of the above.
C, Incident reports.
B, Safety audits.
A, Employee surveys.
What should be the first step in responding to a chemical spill in the workplace?
D, Clean it up immediately.
C, Notify emergency services.
B, Contain the spill.
A, Evacuate the area.
