Font size
WorksheetsCAD101 Final Exam
Total questions: 40
Worksheet time: 13mins
What is Computer Aided Drafting?
It is a software used to analyze drawings
A program used by Mathematicians.
An aid used in creating and modifying drawings.
It a computer program like Adobe.
Identify the draw toolbar command. It is a/ an:
Line
Rectangle
Polygon
Polyline
The last command can be repeated by pressing _________ or _________ on the keyboard.
esc, enter
spacebar, enter
u, spacebar
None of the above
The user can UNDO the last command by using:
(Check all boxes that are correct)
Right click and selecting Undo
Spacebar and enter
Undo shortcut key in quick access toolbar
U and enter key
Esc key and enter
There are only two methods available to select objects in the drawing window. True or False
Ture
False
ESC key on the keyboard allows the user to :
Repeat command
Undo the command
Cancel command
None of the above
Hot grips allow the user to manually manipulate and object by either stretching or moving it. True or False
True
False
Identify the draw toolbar command. It is a/ an:
Circle
Donut
Ellipse
Spline
This command is used to draw a four sided figure. It is a/ an:
Hatch
Rectangle
Polygon
Ellipse
This command is used to add fill or patterns to closed figures. It is a/ an:
Hatch
Donut
Polygon
Ellipse
Panning allows you to…
Minimize the drawing
See all of the drawing at once
Close in on a small area
Move around the drawing at the same scale
Polar coordinates are usually used to draw...
Horizontal lines
Vertical lines
Diagonal lines
Non of the above
Relative coordinates are usually used to draw...
Horizontal lines
Vertical lines
Diagonal lines
All of the above
Absolute coordinates are usually used to ....
draw horizontal lines
draw vertical lines
locate one point
All of the above
Moving mouse in the direction and entering a measurement is called ___________________ coordinate entry.
Absolute
Direct Distance
Polar
Relative
To reduce the size of an object to half of its initial value using SCALE command the scale factor would be?
2
0.5
.25
4
As per the array command of AutoCAD, what is the row gap between rectangles in this array?
1
1.5
3
4.5
To break a Polyline into lines and arcs which command can be used
Break
Trim
Explode
Overkill
From what direction dose AutoCAD start measuring angles?
3 o'clock
6 o'clock
9 o'clock
12 o'clock
How do you select objects with a Crossing selection?
Draw a window up to down
Draw a window from left to right
Draw a window from right to left
Pick on the window
How do you select objects with a Windowing selection?
Draw a window up to down
Draw a window from left to right
Draw a window from right to left
Pick on the window
The origin of the drawing is at:
Random point in space
The first point you select
0, 0
Objects are rotated around the
base point
bottom right of the object
Center of the object
The fillet command creates ____
Both round and sharp corners
Round corners
Angled corners
A polar array creates new objects _____
in a straight line
in a grid pattern
in circular pattern
Turning on __________________ allows you to draw horizontal and Vertical lines only.
Polar tracking
Ortho mode
Object snaps
Grid
Which is the correct front view of the figure provided?
Which is the correct right side view of the figure provided?
What will be the top view of the given isometric object?
The depth axis lines in a cavalier oblique are drawn at ______ scale.
1/4
1/2
3/4
Full
A cabinet oblique drawing has a depth axis drawn at _____ scale.
1/4
1/2
3/4
Full
What angle(s) do you use to draw an Isometric drawing?
30/30 degrees
45 degrees
90 degrees
45/45 degrees
To add text or dimensions on a drawing, use the
Home tab
Annotate tab
Drawing Utilities
Units
In perspective drawings, the place where all lines meet:
Horizon Line
Vanishing Point
Proportion
Vertical Line
The term 'Source' in AutoCAD means:
Edit
Original
Open
Other
To insert the degree symbol in a text, type ____.
'
d
"
%%d
Objects such as trees, road symbols etc can be found in the __________________.
Annotate tab
Design Center
Modify panel
Draw panel
Units is used to set:
(check all correct answers)
Angle
Limits
Precision
Length type
