Dimensions generally take the form of_______ (select all that apply)

Dimension and extension lines are thin so that they will not be mistaken for__________ lines.

Which line type does not ever have arrowheads?

Leader lines should not be________ (select all that apply)

Lettering should measure a minimum of ______ on the printed drawing.

All dimension text should be ________

What is this symbol? ↧

What is this symbol? ⌵

What is this symbol? ⌯or=

X is the symbol used for repeated features. What else is this symbol used for?

A reference dimension is given within__________

Is 2X 45° a repeated feature or a chamfer dimension?

Dimensioning hidden lines under some circumstances are allowed.

A complete circle such as a hole dimensioned by its ___________________

_______ is located in the circular view.

The diameter of a _______ is given in the circular view. (select all that apply)

Select the correct dimension text for 3 repeated holes with a diameter of 10 mm

Select the correct dimension text for 2mm chamfer dimension with equal sides

Select the correct dimension text for a 1/2 inch blind hole that is 1 inch deep.

Select the correct dimension text for a 1/4 inch hole and a 1/2 inch counterbore that is 1/2 deep.

The distance from the edge of a part to the center of a hole is an example of a ___________ dimension.

The first dimension line is spaced ______ from the view depending on available space.

What projection method is used in the U.S.A.

Dimensions should be ____________________ (select all that apply)