wayground logo

Free Printable Worksheets

Font size

S
M
L
XL
Worksheets

Active and passive

Total questions: 23

Worksheet time: 9mins

Name
Class
Date
1.

Technician A: states that active wheel speed sensors do not require a power supply from the ABS control module.

Technician B: states that some active wheel speed sensors can determine the direction of vehicle travel.


Which technician is correct?

a)

Technician A

b)

Technician B

c)

Both Technicians

d)

Neither Technician

2.

What main components are added to an ABS system to create ESC capability?

a)

Wheel speed sensors, a steering angle sensor and a lateral/yaw sensor

b)

A steering angle sensor and a lateral/yaw sensor

c)

Wheel Speed Sensors and a steering angle sensor

d)

A brake light switch, wheel speed sensors, a steering angle sensor and a lateral/.yaw sensor

3.

What type of signal is generated by an inductive ABS wheel speed sensor?

a)

High/Low

b)

Analog

c)

Inversely proportional

d)

square wave

4.

What does 4-channel ABS control?

a)

Brakes pressures using 4-position hydraulic solenoid valves

b)

Braking at front wheels individually and rear wheels together

c)

Brake pressures at each wheel individually

d)

Brake pressure to all wheels equally

5.

What is the component tells the ABS module when a wheel is beginning to lock up?

a)

Brake master cylinder

b)

ABS Pump

c)

Reluctor wheel

d)

Speed sensor

6.

The ABS assembly has 3 parts to it. What are they?

a)

Pump, motor, control module

b)

Pump, motor, tank

c)

Intake, exhaust, power

d)

Motor, pipe, server

7.

How many speed sensors are needed for a 4 channel ABS system?

a)

1

b)

2

c)

3

d)

4

8.

What is the correct name for the "toothed wheel"?

a)

Relapser wheel

b)

Reluctant wheel

c)

Releaser wheel

d)

Reluctor wheel

9.

True or False The ABS system will not shorten the stopping distance in an emergency stop.

a)

True

b)

False

10.

True or False A vehicle is less maneuverable without ABS

a)

True

b)

False

11.

What tool is used to remove the brake lines from the ABS assembly?

a)

Combination wrench

b)

Spanner wrench

c)

Lug wrench

d)

Flare nut wrench

12.

Where is the speed sensor located?

a)

At the wheels

b)

In the rotor

c)

In the engine compertment

d)

In the trunk

13.

The ABS light remains on after its brief self-test during startup. What does it mean?

a)

There is a fault stored, but ABS will intervene during certain traction events

b)

The conventional braking system will have reduced functionality

c)

There is a fault stored, and ABS will not intervene during traction events

d)

The conventional braking system becomes fully disabled

14.

A customer states that the ASR/ESC lamp flashed briefly last week on a curvy road, but there are no faults stored. What is the most likely cause?

a)

The ABS module is faulty because it didn't store faults

b)

The ESC module is faulty because it didn't store faults

c)

There was a traction event and the system operated normally

d)

There are worn brake pads that require replacement.

15.

An inductive wheel speed sensor will produce which of the following waveforms?

a)
b)
c)
d)
16.

Technician A states that active wheel speed sensors do not require a power supply from the ABS module in order to function.


Technician B states that active wheel speed sensors are capable of detecting reverse direction.


Who is correct?

a)

Technician A

b)

Technician B

c)

Both Technicians

d)

Neither Technician

17.

Design to cushion the driver (including passenger if the passenger side is equipped) during frontal crash.

a)

Seatbelt

b)

Antilock Braking System

c)

Electronic stability control

d)

Airbag

18.

Airbag may be known by many different names EXCEPT

a)

Supplemental restraint system (SRS)

b)

Supplemental power restraint (SPR)

c)

Supplemental air restraint (SAR)

d)

Supplemental inflatable restraint (SIR)

19.

To force occupants back into position against the seat and to remove any slack. The statement is for ...

a)

Crash sensor

b)

Seatbelt

c)

Airbag

d)

Pre-tensioner Seatbelt

20.

ABS can improve braking when road is not in a good condition such as ...

a)

Hot

b)

Snow

c)

Wet

d)

Ice

21.

A system designed to help drivers maintain control of their vehicles in situations where the vehicle is beginning to lose control. The statement is for ...

a)

Antilock Braking System (ABS)

b)

Traction Control System (TCS)

c)

Electronic Stability Control (ESC)

d)

Tire Pressure Monitoring System (TPMS)

22.

Which one is called understeer situation?

a)

A

b)

B

23.

Sensors used in Electronic Stability Control (ESC)

a)

Yaw Rate Sensor

b)

Lateral acceleration sensor

c)

Vehicle speed sensor

d)

Steering wheel position sensor