The _________ topology may include the locations of devices (e.g., the room number and location on the equipment rack).

Which of the following are the most common LAN/WAN physical topologies? (Choose two.)

The __________ topology refers to the way a network transfers frames from one node to the next.

The ____________ topology of a network identifies virtual connections using device interfaces and Layer 3 IP addressing schemes.

The ____________ topology of a network is used by the data link layer to determine the type of network framing and media access control used.

Which type of network topology is illustrated in the figure?

Which type of network topology is illustrated in the figure?

Which of the following are common WAN physical topologies?

What is the name of the physical WAN topology illustrated in the figure?

What is the name of the physical WAN topology illustrated in the figure?

What is the name of the physical WAN topology illustrated in the figure?

A __________ topology is a variation or combination of other topologies.

A partial mesh is a _______ topology in which some, but not all, end devices are interconnected.

Physical __________ topologies directly connect two nodes.

True/False. In a point-to-point WAN connection, the two devices do not have to share the media with other hosts.

The maximum number of nodes in a point-to-point topology is _______.

In modern LAN environments, end devices are usually interconnected using which physical topologies?

In legacy LAN environments, end devices are usually interconnected using which physical topologies?

In a ______ topology, end devices in a LAN are connected to a central intermediary device, such as an Ethernet switch.

Which of the following topologies involves the use of multiple interconnected Ethernet switches?

Which of the following LAN topologies are easy to install and very scalable?

In which physical LAN topology are all end systems chained to the same medium, which is terminated at each end?

Legacy Ethernet networks often used a physical __________ topology with coaxial cable as the medium.

Legacy Fiber Distributed Data Interface (FDDI) networks often used a physical __________ topology

Legacy Token Ring networks used a physical __________ topology

Legacy Ethernet networks with end devices connecting to a hub had a physical _____ topology.

Legacy Ethernet networks with end devices connecting to a hub had a logical _____ topology.

Which LAN topology is illustrated in the figure?

Which LAN topology is illustrated in the figure?

Which LAN topology is illustrated in the figure?

Which LAN topology is illustrated in the figure?

In a LAN, ____________ communication refers to the direction of data transmission between two devices.

In __________ communication, both devices can transmit and receive on the media but cannot do so simultaneously.

WLANs and legacy bus topologies with Ethernet hubs use which duplex communication mode?

Which duplex communication mode allows only one device to send or receive at a time on the shared medium.

Which duplex communication mode allows both devices to simultaneously transmit and receive on the shared media?

When _________ duplex communication is used, the data link layer assumes the media is available for transmission for both nodes at any time.

Ethernet switches operate in which duplex mode by default?

If an Ethernet switch is connected to a hub, in which duplex mode will the switch operate?

Which duplex communication mode restricts the exchange of data to one direction at a time?

Which duplex communication mode allows the sending and receiving of data to happen simultaneously?

If the Ethernet switch interface and the host NIC operate using different duplex modes, there will be a _____________.

Ethernet LANs and WANs are examples of ___________ networks.

In ____________ multiaccess networks, all nodes are operating in half-duplex, competing for the use of the medium.

Which access control method would be appropriate for the network illustrated in the figure?

Which access control method would be appropriate for the network illustrated in the figure?

In a ______________ multiaccess network, each node has its own time to use the medium.

Which type of access method is used on legacy Token Ring LANs?

Which contention-based access method is used on legacy bus-topology Ethernet LANs?

In a ______________ multiaccess network, each node must wait for its turn to access the network medium.

Which contention-based access method is used on Wireless LANs?

In Carrier Sense Multiple Access, what does "carrier sensing" mean?

With a legacy Ethernet hub, any bits received on an incoming port are regenerated and ________.

Which contention-based access method is used in IEEE 802.11 Wireless LAN environments?

__________ does not detect collisions but attempts to avoid them.

In ___________, each device that transmits includes the time duration it needs for the transmission. This lets other devices know how long the medium will be unavailable.

Which contention-based access method is appropriate for Ethernet LANs using switches?

Which topology displays networking device layer IP addresses?

What kind of network would use point-to-point, hub and spoke, or mesh topologies?

Which LAN topology is a hybrid topology?

Which duplex communication method is used in WLANs?

Which media access control method is used in legacy Ethernet LANs?

The ____________ of a network is the arrangement of the network devices and the interconnections between them.