WorksheetsTLE 8 - ICT technical Drafting_1st Summative Test
Total questions: 35
Worksheet time: 19mins
A drawing tool used to draw horizontal lines and serve as guide for triangle.
An instrument used for drawing vertical and oblique lines.
The best instrument used for dividing lines or distance into equal parts.
A flat piece of plastic with standard symbols and used as guide for drawing images on plans.
It is used in setting a line degree angle.
A thin plate (as of metal or celluloid) with holes usually of several sizes used to confine an erasure to a limited area.
A ruler that has a 3-lobed cross-section with 6 different types of scales on the edges (2 on each face) used for measuring and preparing scale drawings such as blueprints and maps. It is also called an architect's scale.
This tool contains pre-dimensioned holes in the right scale to accurately draw a symbol or sign
Drawings that shows how something works or is made are called ____________.
Artistic Drawing
Animation Drawing
Technical Drawing
It is used for fastening the drawing paper on the drawing table or drawing board. It does not damage the board and it will not damage the paper if it is removed by pulling it off.
Drawing Paper
Tracing Paper
Masking Tape
Drawing Stool
It is a pencil with a replaceable and mechanically extendable solid pigment core called a lead and can be mechanically extended as its point is worn away.
Drafting Stool
Mechanical Pencil
Sandpaper Block
Eraser
Why does measurements important in mechanical drafting?
it supports no accuracy and no standards in a product
it supports drafting tools to lessen its function
it helps drafting to include designs that is needed in planning
it helps drafting to produce accurate finished product
How many degrees has this tool?
30º
10º
90º
80º
100º
45º
45º
45º
90º
90º
90º
100º
How many degrees has this tool?
90º
70º
15º
90º
60º
30º
80º
40º
10º
50º
100º
12º
divided into 12 equal parts
foot
inch
the unit of measure is the meter
English system
Metric system
there are ten millimeters
meter
centimeter
is divided into one hundred equal parts
meter
centimeter
The process of measuring and determining the value, length, width,
thickness, weight and area of a surface or an object
calculation
mensuration
conversion
innovation
process that transforms and calculate one or more
inputs into results and to determine mathematical in terms of number and amount.
calculation
mensuration
conversion
innovation
1 foot = 12 inches is an example of what type of measurement?
metric to english
english to metric
metric to metric
english to english
How many centimeters are there in 1 inch?
2.50
2.52
2.54
2.56
Round off 76.235 to the nearest whole number
76.23
76.2
76
80
Round off 45.678 to the nearest tenths
45.6
45.7
45.68
46
Round off 45.678 to the nearest hundredths
45.6
45.7
45.68
46
Convert 1/4 to decimal
0.25
0.33
0.45
0.67
Convert 2/3 to decimal
0.25
0.33
0.45
0.67
System of linear measurement that has a unit of yard, foot and inches
English
Metric
System of linear measurement that has a unit of a millimeter, centimeter and meter
English
Metric
______ your tools and materials before using them.
Inspect
Use
Wash your hands with _____ water before and after handling tools and materials.
dirty
clean
What is the length of the blue line?
7/16"
1/2"
9/16"
What is the measurement depicted in this picture?
1/4"
5/16"
3/8"
What is the length of the ballpeen?
7/8"
13/16"
15/16"
What is the length of blue the line in millimeter?
44
45
4.4
