WorksheetsAssessment in Carpentry 7
Total questions: 20
Worksheet time: 7mins
The following are the examples of measuring tools, except,
caliper
divider
ruler
c-clamp
It is an edge cutting tool which is used to trim and shape wood.
chisel
plane
spokeshave
cabinet scraper
Which of the following classifications is used to make holes?
measuring
holding
boring
miscellaneous
PPE stands for (a) .
This is used for drawing arcs and circles.
compass
chalk line
marking gauge
caliper
The accounting of tools and materials.
inventory
label
stock
segregate
Which of the following is not belonged to the group?
auger bit
drill bit
expansive bit
plumb bit
What is the use of pull-push rule?
Cut across the grain
Test the squareness of stock
Test vertical alignment
Measure long distances
This is used to drive and loose screws
sscrewdriver
nail set
c-clamp
claw hammer
It is used to establish straight line on a surface.
compass
divider
chalk line
marking gauge
Wipe measuring tools before returning them to the storage room.
true
false
Use caliper as tongs.
true
false
Wipe off edges of the steel tape of pull-push rule with bare hands.
true
false
Check the lock of a pull-push rule if it is working
true
false
Oil the movable parts of the measuring tools.
true
false
Make sure that grits like sand do not get inside the case of pull-push rule.
true
false
Compute the number of board feet of lumber with the dimension;
5"x5"x19"
39.58 Bd.Ft.
40.58 Bd. Ft.
41.58 Bd. FT.
42.58 Bd. Ft.
Compute the number of board feet of lumber with the dimension;
3"x3"x10"
6.5 Bd. Ft.
7.5 Bd. Ft.
8.5 Bd. FT.
9.5 Bd. Ft.
Compute the number of board feet of lumber with the dimension;
3"x8"x11"
20 Ft.
21 Bd. Ft.
22 Bd. FT.
23 Bd. Ft.
Compute the number of board feet of lumber with the dimension;
9"x4"x2"
6 bd.Ft.
7 Bd. Ft.
8 Bd. FT.
9 Bd. Ft.
