NEW
Font size
WorksheetsAnalog and Digital
Total questions: 62
Worksheet time: 31mins
FSK reception is
Phase Coherent
Phase non coherent
Phase Coherent & non coherent
None of the mentioned
Which is called as on-off keying?
Amplitude shift keying
Uni-polar PAM
Amplitude shift keying & Uni-polar PAM
None of the mentioned
QAM uses ______ as the dimensions.
In phase
Quadrature
In phase & Quadrature
None of the mentioned
Which has same probability of error?
BPSK and QPSK
BPSK and ASK
BPSK and PAM
BPSK and QAM
Which system uses QAM?
Digital microwave relay
Dial up modem
Digital microwave relay & Dial up modem
None of the mentioned
Modulation process corresponds to ______ the amplitude, frequency or phase.
Switching
Keying
Switching or keying
None of the mentioned
Matched filter
Is a non linear filter
Produces maximum output SNR
All of the mentioned
None of the mentioned
Average energy per bit is given by
average energy symbol/log2 M
average energy symbol * log2 M
log2 M/ Average energy symbol
none of the mentioned
In DPSK technique, the technique used to encode bits is
AMI
Differential code
Uni polar RZ format
Manchester format
In binary data transmission DPSK is preferred to PSK because
a coherent carrier is not required to be generated at the receiver
for a given energy per bit, the probability of error is less
the 1800 phase shifts of the carrier are unimportant
more protection is provided against impulse noise
For the signal constellation shown in the figure, the type of modulation is
QPSK
FSK
ASK
PSK
A DPSK wave is obtained by
BPSK
Differential encoding followed by BPSK
Differential Encoding
None
For coherent FSK modulation probability of error
Pe=21erfc(2NoEb)
Pe=21erfc(21N0Eb)
Pe=21erfc(N0Eb)
None
QPSK uses a phase shift of
π
2π
4π
2π
The Maximum bandwidth is occupied by
ASK
BPSK
FSK
None
A __________ is a piece of information that is communicated through using the senses.
wave
signal
circuit
notification
This is wireless method of sending information uses radio waves
analog
WiFi
landline
GPS
The use of light and cables to transfer electric signals over long distances
WiFi
GPS
fiber optics
landline
To translate information into the form of code
transmit
encode
signal
encrypt
The passing on, or transfer, of information
transmit
encode
signal
encrypt
Change continuously over time; represented by a continuous smooth curve; can be a range of values
analog signals
digital signals
wireless signals
electric signals
Is discrete and not continuous; represented by two values - either on or off
analog signals
digital signals
wireless signals
electric signals
A signal to or from a computer is encoded into _________________, such as the two values - on (1) or off (0).
analog signal
digital signal
binary numbers
electricity
A single unit of information in quantitative or qualitative form
signal
encryption
data
wave
the unwanted modification of a signal
encryption
noise
analog
modulation
a signal whose frequency is modulated
FM
AM
PM
IM
a signal whose amplitude is modulated
FM
AM
PM
IM
The process of approximating the continuous set of values with a finite set of values is called:
Modulation
Sampling
Quantization
Approximation
Select the correct order of blocks in PCM Transmitter
Encoder, Quantizer, Sampler, Low Pass Filter
Low Pass Filter, Quantizer, Sampler, Encoder
Low Pass Filter, Sampler, Quantizer, Encoder
Low Pass Filer, Encoder, Sampler, Quantizer
The block that is NOT present in a PCM Transmitter
Low Pass Filter
Sampler
Encoder
Amplifier
The difference between the actual analog value and approximated discrete value due to the rounding is called
Quantization Error
Sampling Error
Reading Error
Actual Error
Each quantized sample is assigned the binary code that represents the discrete amplitude value closest to the pulse's actual value. This is known as
Encoding
Sampling
Quantizing
Decoding
A _________ quantizer uses equal length quantization intervals linearly related to analog sample values.
Uniform
Non-Uniform
A minimum sampling rate is ___ times the highest frequency component or upper bandwidth limit of the analog signal as per the sampling theorem.
2
4
6
8
Identify the type of modulation
PAM
PPM
PWM
PCM
Sampling is a process in which _________ of continuous time signal is measured at discrete instants
Frequency
Amplitude
Phase
Wavelength
Identify the type of Sampling
Flat top sampling
Instantaneous sampling
Natural sampling
In ____, the frequency of the analog carrier signal is varied proportional to the digital information signal.
ASK
FSK
PSK
MSK
Identify the modulation technique followed to obtain the above shown modulated signal
ASK
FSK
PSK
MSK
Which of the following CANNOT be defined as a Digital to Analog conversion technique
AM
ASK
PSK
QAM
In ASK, the ____ of the carrier is varied to represent two or more different signal elements
Amplitude
Phase
Frequency
All of the above
___ is the process of converting analog data to digital signals
Modulation
Digitization
Demodulation
Encoding
