The normal weight of concrete is 2400kg/m3. This is equivalent to ____ in lb/ft3.

A slight curve used in long spans such as beam, girder or truss with a purpose of counteracting deflection due to load.

The following are structures like a beam, except:

A wall of treated timber, masonry, or concrete for holding in place a mass of earth.

Planted Column is considered in design as:

Which among the following activities takes 21 days before Formwork Removal is implemented?

When laying concrete, it is sometimes not possible to pour in one setting. It can be due to weather, time constraints, lack of materials or even by design. Hence, there will be a separation between old and newly poured concrete once concrete pouring resumes. What do you call this?

Slump test is done in fresh concrete in order primarily to determine:

It is the stress caused by an applied loads that tend to twist the structure.

Property that enables deformity upon application of force and recovers after removing such force

The minimum thickness of a solid non-prestressed concrete slab allowed by code (NSCP) is:

What is the minimum concrete cover of cast-in-place beams exposed to weather considering 20mm dia. bars?

Identify the picture.

What area is not recommended to use capillary membrane waterproofing?

A manual method of squaring the corners of a building lines in building layout, is the use of?

Identify the picture.

The time required for the removal of a form works of a concrete footing?

Curing period for the removal of forms in beams and girder bottom form up to 14"?

Curing period for the removal of forms in beams and girder side form?

Curing period for the removal of forms in slab over 7 feet in span?

A technique of constructing multistory buildings in which all horizontal slabs are cast at ground level and, when cured are raised into position by hydraulic jacks?

A method of casting reinforced concrete wall panels on site in a horizontal position, then tilting them up into their final position.

The architect should expect the subfloor to sustain some damage during the construction process.

Is prepared by grinding pozzolanic clinker with Portland cement. It is also produced by adding pozzolana with the addition of gypsum or calcium sulfate or by intimately and uniformly blending portland cement and fine pozzolana.

Is prepared by maintaining the percentage of tricalcium aluminate below 6% by increasing the proportion of C2S. This makes the concrete to produce low heat of hydration and thus is used in mass concrete construction like gravity dams, as the low heat of hydration prevents the cracking of concrete due to heat.

Is used to reduce the risk of sulphate attack on concrete and thus is used in construction of foundations where soil has high sulphate content. This cement has reduced contents of c3A and c4AF.

It is produced by mixing 5-10% mineral pigments with ordinary cement. They are widely used for decorative works in floors.

It is most widely used type of cement which is suitable for all general concrete construction. It is most widely produced and used type of cement around the world with annual global production of around 3.8 million cubic meters per year. This cement is suitable for all type of concrete construction.

A stair constructed without risers is generally called a?