Font size
WorksheetsPH FIRE CODE
Total questions: 30
Worksheet time: 17mins
Fires involving cloth and rubber.
Class A
Class B
Class C
Class D
Class K
Building contents that are liable to produce a considerable volume of smoke in case of fire but will not cause explosions or produce poisonous fumes.
Low hazard contents
Moderate hazard contents
High hazard contents
Very high hazard contents
Non-explosive contents
Who must witness the testing and commissioning of the fire protective and warning system?
The Fire Marshall
The Fire Safety Inspector
The Plan Evaluator
The Chief of the FSES
The Building Official
Fires involving sodium.
Class A
Class B
Class C
Class D
Class K
Based on the occupancy classifications in the Fire Code, dry and wet markets are classified as:
Business
Mercantile
Industrial
Special Structures
Mixed
Fires involving flammable liquids and gases.
Class A
Class B
Class C
Class D
Class K
A system of vertical pipes to which firehoses can be attached on each floor.
Standpipe System
Automatic fire suppression system
Sprinkler system
Riser
Fire detection and alarm system
A building is considered high-rise in the Fire Code when it is ___ meters of more in height.
10
15
30
40
50
This person is tasked with the review of the plans and the specifications to determine the design’s compliance with the Fire Code and other life and safety standards.
The Fire Marshall
The Fire Safety Inspector
The Plan Evaluator
The Chief of the FSES
The Building Official
Fire safety inspection not required for:
Certificate of Occupancy
Business Permit
Building Permit
It is required for all of the above
Which is required for the Building Permit?
FSIC
FSEC
FALAR 3
FSMR
FSCCR
Which is required for the issuance of the FSIC for Occupancy?
FSIC
FSMR
FSCCR
FALAR2
FSCR
If after the building plan review, the plans are disapproved, the Fire Marshall will not issue the FSEC. What will he/she issue instead?
FALAR 1
Notice of Disapproval
Notice to Comply
FSIC
FSMR
Minimum width of a door opening in a means of egress.
710 mm
810 mm
900 mm
910 mm
1220 mm
Which types of operations are required to undergo business inspection?
Industrial Operations
Commercial/Business Operations
Residential Occupancies
The following are typically included in this report: as-built plans, testing certificates, and certification that the building complies with the requirements of the Fire Code.
FSIC
FSMR
FSCCR
FALAR2
FSCR
Which is not an occupancy classification in the Fire Code?
Assembly
Storage
Institutional
Mercantile
All of the ff
The three parts of the means of egress.
Exit access, exit, exit discharge
Exit access, exit, public way
Exit, protective enclosure, public way
Protective enclosure, exit access, exit discharge
Maximum length of a dead end, according to the Fire Code.
5 m
6 m
8 m
10 m
46 m
How many means of egress at the minimum are required for a floor level that will be occupied by 1,000 people?
1
2
3
4
5
According to the Fire Code, if two exits are required, what is the required minimum distance between them? Assume that the building has no sprinkler system.
Length of maximum overall diagonal of the building divided by 2
Length of maximum overall diagonal of the building divided by 3
Length of maximum overall diagonal of the building divided by 4
1/5 of the perimeter of the area served
1/2 of the perimeter of the area served
Minimum tread depth required by the Fire Code for existing stairs.
200 mm
230 mm
250 mm
280 mm
300 mm
Minimum width required for new stairs serving an occupant load of 49.
710 mm
915 mm
1015 mm
1120 mm
1420 mm
Which handrail mounting height is prohibited by the Fire Code for stairways?
760 mm
785 mm
865 mm
None of these is prohibited
Occupant load factor of in-patient healthcare treatment facilities, according to the Fire Code
9.30 sqm/person
11.10 sqm/person
18.60 sqm/person
22.30 sqm/person
33.10 sqm/person
Occupant load factor of residential occupancies, according to the Fire Code
9.3 sqm/person
11.1 sqm/person
18.6 sqm/person
22.3 sqm/person
33.10 sqm/person
Minimum illumination required for the means of egress.
8.50 lux
10.70 lux
12.30 lux
According to the Fire Code, the minimum width of a ramp that is used as a component in a means of egress
1120 mm
1200 mm
1220 mm
1400 mm
1420 mm
What is the required fire resistance rating of an exit enclosure if the exit connects 5 levels?
0.5 hour
1 hour
1.5 hours
2 hours
3 hours
When was the IRR of the Fire Code revised?
2008
2010
2015
2019
2020
