___ is the required open space left between the outermost face of the bldg/structure and the property lines e.g: Front, Rearand Left side.

Maximum Allowable PSO (percentage site occupany) for Maximum R-3 with firewall

____ are portions of the Total Lot Area (TLA) not occupied by the Maximum Allowable PSO.

Eaves, canopies,awnings (or media agua) over required windows shall not be less than ___mm from the side and rear property lines.

All pipes materials to be used in bldgs/structures shall conform to the standarad specifications of the Bureau of Product Standards (BPS) of the _____

Maximum Allowable PSO (percentage site occupany) for Commercial C-3 WITHOUT firewall is ?

Maximum Allowable PSO (percentage site occupany) for Institutional with firewall

The cemetery shall be totally enclosed by a perimeter fence/wall of strong material, and all gates shall be provided with strong door and lock. Perimeter wall shall not exceed ___ meters in height.

Stairs shall be at least ___ millimeters in clear width, with a rise of 200 millimeters and a minimum run of 200 millimeters.

Minimum Number of Exits for Apartments that has more than 10 Occupancies

If only two (2) exits are required they shall be placed a distance apart to not less than ___of the perimeter of the area served measured in a straight line bet. exits.

Every corridor or exit balcony shall not be less than ____ meters in width.

For wards and dormitories of institutional buildings – not less than ___ cubic meter of air per minute shall be supplied for each person accommodated.

Door Leaf Width. No leaf of an exit door shall exceed ___meters in width

Distance Between Landings. There shall be not more than ___ meters vertical distance between landings.

Minimum air space for Workshops, Factories, and Offices is ___ cubic meters of air space per person

_____ is a nonstructural facing of brick, concrete, tile, metal, plastic, glass, or other similar approved materials attached to a backing or structural components of the building for the purpose of ornamentation, protection, or enclosure that may be adhered, integrated, or anchored either on the interior or exterior of the building or structure.

Changes in Elevation. Except in Group A Occupancies, changes in floor elevations of less than ___ millimeters along any exit serving a tributary occupant load of 10 or more shall be by means of ramps:

Each mezzanine floor used for other than storage purposes, if greater in area than 185 square meters or more than 18.00 meters in any dimension, shall have at least ___ stairways to an adjacent floor.

The required width of corridors and exterior exit balconies shall be unobstructed. Except, that trim handrails, and doors when fully opened shall not reduce the required width by more than ___ millimeters.

Circular Stairways. Circular stairs may be used as an exit provided the minimum width of run is not less than ___ millimeters

Every required stairway shall have a headroom clearance of not less than ___ meters. Such clearance shall be established by measuring vertically from a plane parallel and tangent to the stairway tread nosing to the soffit above all points.

Title of Chapter Six in NBCP?

Regular plate, sheet, or patterned glass in jalousies and louvered windows shall not be thinner than 5.6 millimeters minimal and not longer than ___ meters.