What does ADA stand for?

T/F: Designing a structure to ADA specifications allows for accessibility by disabled persons.

T/F: Wood members that contact masonry or concrete must be pressure-treated.

T/F: Brick is placed flush against the exterior wall sheathing. (CA - 2”SPACE)

T/F: Every Sleeping Room shall have a smoke detector

T/F: Residential Hallways must be a minimum of 36” clear width

The wall between a garage and livable space shall be which of the following?

At least one exterior door of the residence shall be at least:

Habitual residential space shall have a ceiling height of no less than

Kitchens, halls, bathrooms and toilet compartments shall have a ceiling height of no less than:

The typical single-family residence should be equipped with a service entrance of:

Which of the following is considered a live load?

Guardrails or Handrails must be provided in the change in floor or ground elevations exceeds.

A Kitchen is a habitable room. What type of natural light is required?

Occupancy is based on how many persons for the first bedroom?

Which of the following is an acronym for a Building Code Organization?

T/F: “O.C.” stands for “on center” and indicates the distance objects are apart center to center

T/F: A wall component’s R-values are additive over the thickness of that wall.

T/F: CMU foundation walls are parged, which is a type of water-proofing.

T/F: A floor framing system requires knowledge of loads and material strength

T/F: Decking is the material placed over the Sub Flooring

Showers and tub/shower combinations are to have materials not adversely affected by moisture to what height above a drain inlet?

What is a major difference between balloon framing and platform framing?

A beam is unsupported for a certain distance between posts; this distance is the______?

Rafters are connected to a wall plate at the:

The upper end of a rafter ends at the:

The lower vertical end of a rafter or truss is covered by the:

Identify the Nail Type labeled “AA”

Identify the Nail Type labeled “BB”

Identify the Nail Type labeled “CC”

Identify the Nail Type labeled DD”

Identify “AA” in the adjacent example of a 2nd Floor

Identify “BB” in the adjacent example of a 2nd Floor

Identify “AA” in the adjacent example of an opening

Identify “BB” in the adjacent example of an opening

Identify “CC” in the adjacent example of an opening

What is the typical (preferred) spacing of roof trusses or rafters

Masonry walls require a method of removing condensation. This is done by installing what in masonry walls.

Identify the item in the adjacent example

Identify the item in the adjacent example

Identify the item in the adjacent example

Identify This