wayground logo

Free Printable Worksheets

Font size

S
M
L
XL
Worksheets

HYD brakes

Total questions: 15

Worksheet time: 8mins

Name
Class
Date
1.

Which of the following is a recommended tool for removing brake lines from a wheel cylinder?

a)

Line wrench

b)

Vise grip

c)

Flare nut wrench

d)

screw driver

2.

All of the following are main components of a drum brake system, EXCEPT:

a)

Caliper

b)

Backing plate

c)

Hold down spring

d)

Wheel cylinder

3.

The master cylinder converts the brake pedal force into hydraulic pressure, which is then transmitted_______ via the brake lines and hoses to one or two wheel cylinders at each drum brake assembly

a)

With increased force

b)

With some loss

c)

Without loss

d)

with decreased force

4.

________________ are installed so the direction they are applied is opposite of the forward rotation of the drum.

a)

trailing shoes

b)

leading shoes

c)

stationary band shoes

d)

pads

5.

All of the following components are part of a parking brake system in a drum brake, EXCEPT:

a)

wheel cylinder

b)

brake strut rod

c)

leading shoe

d)

trailing shoe

6.

Brake shoe lining wear causes the brake pedal to travel farther before activating the brakes, reducing the_________, which leaves the driver vulnerable if a hydraulic failure occurs.

a)

brake pedal free play

b)

brake pedal travel

c)

reserve pedal height

d)

none of these

7.

_________ are not typical components of a wheel cylinder.

a)

return springs

b)

piston lip seals

c)

pistons

d)

spring and expander sets

8.

If there is a concern related to the ________ that requires a test drive, extreme caution is required so that an accident doesn't happen as it operates only during extreme braking or poor traction conditions

a)

steering system

b)

disc brakes

c)

suspension system

d)

ABS

9.

What does brake diagnosis start with?

a)

making proper plan

b)

having proper tools

c)

having parts on hand

d)

understanding customer concern

10.

Tech A says that brake shoe linings saturated with brake fluid from a leaky wheel cylinder can be cleaned with brake cleaner and reused as long as they aren't worn out. Tech B says that brake shoes should be replaced in axle sets. Who is correct?

a)

Tech A

b)

Tech B

c)

Both

d)

Neither

11.

Technician A says that if drum brake shoes become saturated with gear oil or grease, they should be replaced. Technician B says that drum brake shoes can be cleaned and reused if the lining becomes contaminated with gear oil or grease. Who is correct?

a)

Tech A

b)

Tech B

c)

Both

d)

Neither

12.

Tech A states that communicating directly with the customer is the best way to understand the customer's concern. Tech B states that an experienced service advisor will gather the required information on the service order. Who is correct?

a)

Tech A

b)

Tech B

c)

Both

d)

Neither

13.

Tech A states that it is not required for the technician to take the customer on the test drive when diagnosing drum brake problems. Tech B states that during the test drive, one should find a safe place to operate the brakes at a variety of speeds with a variety of brake pedal pressures. Who is correct?

a)

Tech A

b)

Tech B

c)

Both

d)

Neither

14.

When diagnosing drum brakes, once you understand the customer's concern, a ________ is usually needed to verify the accuracy of the concern.

a)

scan tool test

b)

visual inspection

c)

fluid level check

d)

test drive

15.

Technician A says that when drum brakes are applied, brake shoes are moved outward against a rotating brake drum. Technician B says that drum brakes are used on the rear of many vehicles today. Who is correct

a)

Tech A

b)

Tech B

c)

Both

d)

Neither