wayground logo

Free Printable Worksheets

NEW

Font size

S
M
L
XL
Worksheets

L3 AP Cold water P2

Total questions: 17

Worksheet time: 9mins

Name
Class
Date
1.

These type of filters work under pressure to remove most of the dissolved mineral content by passing the water through a very fine membrane

a)

Activated carbon filter 

b)

Ion exchange 

c)

Sediment filter 

d)

Reverse osmosis 

2.

Used to reduce limescale formation and other metal-ion contaminants such as lead. It takes the form of tiny granules that work by replacing the mineral or contaminant ions with hydrogen ions

a)

Activated carbon filter 

b)

Ion exchange 

c)

Sediment filter 

d)

Reverse osmosis 

3.

Used to reduce taste and odour such as chlorine. The carbon filter has a large surface area that attracts and absorbs organic substances from the water. The carbon is usually in powder, granular or block form

a)

Activated carbon filter 

b)

Ion exchange 

c)

Sediment filter 

d)

Reverse osmosis 

4.

A cold water system were all the outlets are from the mains is know as?

a)

Direct

b)

Indirect

c)

Basic

d)

One pipe

5.

A cold water system were most of the outlets are from a cold water cistern is know as?

a)

Direct

b)

Indirect

c)

Basic

d)

One pipe

6.

On a indirect system, what outlet MUST be directly of the mains?

a)

Basin

b)

Wc

c)

Shower

d)

Sink

7.

The min size for a water main is?

a)

15 mm

b)

22 mm

c)

28 mm

d)

10 mm

8.

Due to a greater demand on the cistern, as compared to a direct system, the indirect storage system requires a cold water storage cistern for cold only with a minimum capacity of?

a)

150 Litres

b)

200 Litres

c)

230 Litres

d)

300 Litres

9.

Fluid category 1 represents:

a)

A serious health risk

b)

A significant health risk

c)

A slight health risk

d)

No health risk

10.

Which one of the following back flow

prevention devices must be

installed on a supply to a hose union bib tap, according to the Water Regulations?

a)

AUK 2 air gap

b)

Single check valve

c)

Fullway gate vale

d)

A double check valve

11.

The Water Regulations state that a mixer tap which allows the hot and cold water to mix in the body of the tap with unbalanced pressures must have:

.

a)

Double check valve on both hot and cold supplies

b)

Single check valve of both hot and cold supplies

c)

AUK 3 air gap.

d)

AUK 2 air gap

12.

If a hand basin has submerged

taps, which one of the following back flow prevention devices does the

Water Regulations say must be

installed?

a)

Double check valve

b)

AUK 3 air gap.

c)

Overflow

d)

Single check valve

13.

What air gap is required for a wash hand basin

a)

AUK 2 air gap

b)

AUK 3 air gap

c)

AG air gap

d)

AUK 1 air gap

14.

A double check valve is used to protect category 1 water (wholesome water) from what other category of water

a)

Category 5

b)

Category 4

c)

Category 2

d)

Category 3

15.

What one of these is classed as category 4 water

a)

Fluids representing a severe health risk, containing pathogenic organisms, radioactive, faecal

b)

Fluids representing a significant health risk, containing toxic substances

c)

Fluids representing a slight health risk and are not suitable for drinking

d)

Water that would be classed as Cat 1 except for colour, odour, appearance or temperature

16.

The water regulations state that a mixer tap that allows the hot and cold water to mix in the body of the tap with unbalanced pressures must have

a)

Double check valve on both hot and cold supplies

b)

Single check valve on both hot and cold supplies

c)

AUK 2 air gap

d)

AUK 3 air gap

17.

Due to a greater demand on the cistern, as compared to a direct system, the indirect storage system requires a cold water storage cistern for Hot and cold with a minimum capacity of?

a)

150 Litres

b)

200 Litres

c)

230 Litres

d)

300 Litres